Availability of 30k Rated Gooseneck Couplers

Question

Question:

my horse trailer has a 30k lbs coupler on it. Would like to put an offset coupler on it, but can only find them rated at 24k lbs. Does anyone make one rated at 30 k lbs.??

asked by: Larry

0

Expert Reply:

The only offset gooseneck coupler we offer is the B&W Extend-A-Goose Gooseneck Coupler # BWTEXA4200 that has a 24k capacity.

The only couplers we offer with a 30k capacity would be one like the Bulldog Coupler part # BD0289500300.

expert reply by: Jameson C

0

Answer 1

I've attached a picture with three different measurements for the B&W Extend-A-Goose Gooseneck Coupler - 2-5/16" Ball - 10" Offset, #BWTEXA4200. It is 12 inches from the base or bottom of the coupler to the center of the lowest pin…

view full answer...

Answer 2

Thanks for the purchase! And the answer to your question is yes, since it has a 10 inch offset, you will need longer safety chains with the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200. I can't give you an exact length, but an additional…

view full answer...

Answer 3

I called my contact at B&W about the Extend-A-Goose Gooseneck Coupler, part #BWTEXA4200. They told me that the offset holes are so that the adapter can accommodate couplers that have the pin in different locations, and will not affect the towing…

view full answer...

Answer 4

As the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 is a universal coupler, it has to be able to work with different trailers. This means the adjustment holes are offset a little and can cause the coupler to sit a little crooked once…

view full answer...

Answer 5

In order to center up the B&W Extend-A-Goose Gooseneck Coupler part #BWTEXA4200 you can measure from the same point on both sides of your trailer to the center front edge of the coupler. When both of these measurements are the same you have the…

view full answer...

Answer 6

I prefer the B&W Extend-A-Goose Gooseneck Coupler, #BWTEXA4200. If you attach this inner tube to your gooseneck trailer you will get an extra 10" of clearance between your truck cab and trailer. This fits the standard 4" inner diameter…

view full answer...

Answer 7

The gooseneck hitch I recommend for your 2012 F-150 is the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1104. This includes a custom installation kit and when the ball is removed or dropped into the hole gives you complete bed access.…

view full answer...

Answer 8

Normally drilling is not required when installing the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200. Typically this has the correct hole size and location for most trailer applications. But if you need to drill your trailer to give you the…

view full answer...

Answer 9

I have a solution for you but the Curt 4" Offset Ball for Double-Lock Gooseneck Hitch item #C602 will not work with the Ecotric ET-062 hitch system. The Curt offset ball only fits Curt Double-Lock gooseneck hitches. The other offset balls we…

view full answer...

Answer 10

The pin holes in the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 are 3/4" in diameter for a 3/4" Pin #BD0233060301. The 8 holes are spaced 1" on center vertically for 8" range adjustment.

view full answer...

Answer 11

The Bulldog coupler part #BD44150WH301 is a really great choice for your Featherlite trailer. It'll be very reliable and easy to use so you'll really like it. Then for an a-frame jack we have the zinc coated etrailer A-Frame Round Jack…

view full answer...

Answer 12

I wish we had something that matched what you need but none of the offset gooseneck couplers we offer have forward facing mounting holes. They all have holes that go from the sides. For a cushioned coupler setup with a 5 inch offset that comes with…

view full answer...

Availability of 30k Rated Gooseneck Couplers

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching