How to Install a Brake Controller on a 2014 Ford F-150 with Factory 7-Way

Question

Question:

Do have a video on how to install the Curt Triflex brake controller in a 2014 Ford F150?

asked by: Chris R

0

Expert Reply:

A brake controller, whether it is a Curt or a Tekonsha or another brand, will plug into the same place on your 2014 Ford F-150. So I have included a link to a video showing installation of a different brake controller on a 2013 Ford F-150 and the process will be basically identical on your 2014.

The connection point on the vehicle is located behind the center console, to the left of the radio. You will have to remove that panel and the connector will be behind it.

expert reply by: Michael H

0

Answer 1

For a great brake controller at a great price I would recommend the Curt Triflex Brake Controller part #C24VV. This is a proportional brake controller that will sense how much braking power the tow vehicle is applying and will proportionately apply…

view full answer...

Answer 2

To replace the existing trailer brake controller on your 2009 Ford F-150 with a Curt proportional unit, such as the Curt TriFlex #C24VV, you can indeed use the same Plug-In Adapter part #C51436 that you used before. You will just need to unplug your…

view full answer...

Answer 3

For your 2008 Ford F-150 the Curt hitch part #C14360 is a confirmed fit and would be a great option. To install a brake controller in your 2008 Ford F-150 you would be able to use the brake controller port under the dash and you will need to complete…

view full answer...

Answer 4

To use the Curt TriFlex brake controller #C24VV with your 2004 Ford F-150 you will also need pigtail #C51322. The vehicle specific harnesses are sold separately because not all versions of a given vehicle are able to use the specific wiring harness.…

view full answer...

Answer 5

Hey Christa, so the Curt Triflex part #C24VV shouldn't be draining your battery since it should be going into a sleep mode when not in use. To cut power to it you would need to unplug it at the rear of the controller. There isn't a master…

view full answer...

Answer 6

Other than some slight cosmetic changes, there haven't been any appreciable changes in the chassis of the Land Rover Range Rover Sport since the first model year of the 2nd generation in 2013. Tekonsha/Draw-Tite nor the rest of the companies have…

view full answer...

Answer 7

The Curt TriFlex Trailer Brake Controller #C24VV with Wiring Adapter #C51436 is a very good option for your 2009 Ford F-150, though to mount it you will need to use the included mounting bracket and screw it in under the dash. If you (understandably)…

view full answer...

Answer 8

To install the Curt Discovery Trailer Brake Controller #C84VV on your 2005 Ford F-150 you will need the Curt Custom Wiring Adapter #C51322. This connector will be found under the dash on your driver side. I have attached a video of this adapter being…

view full answer...

Answer 9

The Curt brake controller install harness part #C51322 that you referenced is a confirmed fit for your 2007 Ford F-150.This adapter plugs into the port on your vehicle's built-in brake control wiring harness. For most applications, this harness…

view full answer...

Answer 10

On your 2005 Ford F-150 with the towing package, there will be a port under the dash that the Curt Custom Wiring Adapter, part #C51322 plugs into. I have attached a photo that has a red arrow pointing to the location on your truck. The Curt Venturer…

view full answer...

Answer 11

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Answer 12

Hello Randy. The issue you are describing sounds like either a short on the brake wire on your 7-way, or a ground issue. The first thing to do is check the ground on your 7-way and make sure it is grounded to a good clean metal surface. Next check…

view full answer...

How to Install a Brake Controller on a 2014 Ford F-150 with Factory 7-Way

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching