bing tracking image
  1. Accessories and Parts
  2. Dutton-Lainson
  3. Trailer Winch
  4. Cables and Straps
  5. Wire Rope
  6. 25 Feet Long
Hand Winch Cable with Safety Hook 5/16" Diameter x 25' Long - 2,500 lbs.
Dutton-Lainson

Hand Winch Cable with Safety Hook 5/16" Diameter x 25' Long - 2,500 lbs.

Part Number: DL24102
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$54.72
Retail:$85.44
You Save: 36%
Accessories and Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Winch Cable and Hook 5/16" Diameter x 25' Long 1-800-940-8924 to order Dutton-Lainson accessories and parts part number DL24102 or order online at etrailer.com. Free expert support on all Dutton-Lainson products. Great prices and Fastest Shipping for Hand Winch Cable with Safety Hook 5/16" Diameter x 25' Long - 2,500 lbs.. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (14)
  • Q & A (0)
  • Videos (1)
  • Photos

Dutton-Lainson Accessories and Parts - DL24102

  • Trailer Winch
  • Cables and Straps
  • Wire Rope
  • Dutton-Lainson
  • 25 Feet Long
  • 5/16 Inch Diameter
  • 2500 lbs

Winch Cable and Hook 5/16" Diameter x 25' Long


Features:

  • 7 x 9 Galvanized aircraft cable
  • 5/16" Diameter x 25' long with safety hook
  • Suitable for use on D-L hand winches up to 2,500 lb capacity
  • Suitable for use on D-L electric winch models SA9000 and SA12000


24102 Hand Winch Cable with Safety Hook 5/16" Diameter x 25' Long - 2,500 lbs.





Video of Hand Winch Cable with Safety Hook 5/16" Diameter x 25' Long - 2,500 lbs.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for All You Need to Know About the Hand Winch Cable with Safety Hook 5/16" Diameter x 25' Long

Today we're going to be taking a look at part number DL24102. This is the dutton lainson hand winch cable with a nice safety hook. It's going to be a 7 by 9 galvanized aircraft cable, very strong and durable. They're going to give you 25 ft of total cable length and the cable's going to have a diameter of 5/16ths of an inch. Here on this end here, we're going to have a forged steel hook, it's going to have the nice safety latch so that's going to prevent accidental disconnecting and unhooking. Spring loaded, so it's going to close automatically. Nice large hook, I'm going to take a measurement of that for us real quick.

The opening size that we're going to have, inside edge to inside edge, this point here to this point here, looks to be about 1 and 3/8ths of an inch. Very large opening, the thickness going this direction of the hook itself is going to measure about 1 and 3/8ths of an inch. Then if we measure thickness going this way we've got about 1 inch. Forged steel construction, that hook is going to be very strong and durable. Here on the inner part of the cable, its going to have a nice steel plate or metal plate. That's designed to allow the hook to rotate freely in there without causing any damage to the cable itself.

This is going to be able to work for hand operated winches up to 4,000 pounds. Safe working load limit for other applications is going to be 1,960 pounds. Then here on this end, you're going to have exposed cable, that way you can get it connected to your winch and operate it as necessary. You want to make sure to get that side secured again, it's going to have a diameter of 5/16ths of an inch, with an overall length of 25 feet. That's going to do it for our review of part number DL24102.

This is the dutton lainson hand winch cable with included safety hook. .

Customer Satisfaction Score:

Ratings & Reviews

4.6

14 reviews
Winch Cable and Hook 5/16" Diameter x 25' Long

by:

Heavy duty quality and delivered as pro mised.



by:

Good heavy duty cable



by:

Kinked and frayed too easy.

Steve profile picture

Steve

3/17/2022

Replaced cable



by:

only issue we had with this cable and hook assembly was that hook was much larger than what we had before and the larger one didn't fit so well on the boat



by:

Exactly what I ordered. Quick delivery.



by:

A portion of rigging to assist us in lifting trusses. Good product!



by:



by:

heavy duty



by:



by:

I love it ... thank you



by:



by:



by:



by:


14
14

See what our Experts say about this Dutton-Lainson Accessories and Parts

  • Recommended Winch to Replace Dutton-Lainson DLB1500A
    Hey John! For a 2 speed winch that will make cranking up your pontoon easier I recommend the Dutton-Lainson Hand Winch # DL14825. This winch has high carbon steel gears and permanently lubricated bearings with a 2,500 lb capacity so it won't have an issue handling the pontoon. It comes with a 5-year warranty and can be used with a wire rope like the # DL24102.
    view full answer...
  • Recommended Replacement for the Shelby Trailer Winch 5409B
    The Shelby Trailer Winch 5409B is a single speed brake hand winch with a 2,100 lb capacity. It was discontinued some time ago. In order to replace this winch I recommend using the Dutton-Lainson Hand Winch part # DL15721. The Dutton-Lainson winch has an automatic brake for safety, zinc coating for protection, and 2,500 lb capacity. If you also need a new wire rope to go with this winch I recommend the Hand Winch Cable with Safety Hook part # DL24102. I have attached a review video of...
    view full answer...
  • Winch Recommendation to Pull Boat Trailer Up Hill
    On the Dutton Lainson # DL15721, the ratchet style two-way means that you will be able to ratchet the load in or let it out by ratcheting the handle, so when letting a load out the weight of the load will not just totally let go. This would be the style of winch I would recommend for your application. For a cable you'd then want the part # DL24102 which is 25 feet long. You'd have to attach the winch to the top of your post as the bottom of the winch is the mounting bracket. I wish we...
    view full answer...
  • Is Dutton Lainson 2 Speed Winch DL14830 Good Choice for Car Hauler
    Yes the Dutton Lainson 2 speed winch part # DL14830 would be a really great option for your Trailex car hauler. It has more than enough capacity so it will be easy to crank and since it's a 2 speed winch it gives you ability to crank faster when you don't need quite as much leverage or slower when you need more pull strength.
    view full answer...
  • Looking For Automatic Braking Winch That Will Accommodate Cable
    Hello Larry, thanks for reaching out. We do have an automatic braking winch that will accomodate a cable. For that I recommend the following: - Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs # DL15721 This will work with up to 34' of 5/16" cable. The cable is sold separately, and what I recommend for that is Hand Winch Cable with Safety Hook 5/16" Diameter x 25' Long - 2,500 lbs # DL24102 That said, the mounting holes on this winch are not at 4" on center....
    view full answer...
  • Replacement for Shelby 5470 Trailer Winch
    Shelby has gone out of business and as such there are no replacement parts we can offer for your Shelby 5470 winch; due to that the best option is going to be a replacement winch. For this I highly recommend the Dutton-Lainson Hand Winch # DL14825 because it is a 2-speed winch like your Shelby and allows you to use either Strap # DL24249 or Cable # DL24102. This winch has a 2,500 lb capacity, comes with a 5-year warranty and is made in the U.S.A. I have added a link to a video review...
    view full answer...
    Image 1 for
  • Dutton-Lainson B-Series Winch to Replace Shelby 5353 Winch
    The B-Series of winches are from Dutton-Lainson, and there is a 2,500 lb model that you can use as a replacement for the 2,500 lb Shelby model 5353: - Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs # DL14958 This has an automatic brake, just like the Shelby winch, as well as a 3-1/8" diameter reel hub, which is the closest available to the 3-1/4" reel hub of the Shelby. The other thing you will need with the # DL14958 is the proper cable, the Hand Winch Cable...
    view full answer...
  • Dutton-Lainson Hand Winch Compatibility With Drill Drive Socket Adapter
    The Dutton-Lainson # DL6456 Drill Drive Socket Adapter is only compatible with DLB series brake winches, so it wouldn't work with the # DL14730 winch you'd mentioned. Dutton-Lainson offers a 2500 lb capacity winch as part # DL15761 which is closest in capacity to the 2K winch you were looking at, which is compatible with the socket adapter. The nice thing about a brake winch is it automatically applies the brake when you stop cranking the handle but with the flip of a lever, you can play...
    view full answer...
  • Recommended Dutton-Lainson 2500 Winch For Boat Lift Wheel
    You can use a Dutton-Lainson hand winch for your boat lift, and the easiest one for lifting a 1,700 lb load will have an automatic brake, and a smaller reel hub diameter. A smaller diameter means a shorter cable, but quicker pulling speed. And while you mentioned the B-Series of winch, you may need a DLB-Series, and the reason I say that is because the right one for a boat lift wheel will depend on the internal thread in the center hub of the wheel. The B-Series will work with a boat...
    view full answer...
  • What Determines a Hand Winch Minimum Operating Weight and Can it Be Modified/Lowered
    I reached out to my contact at Dutton-Lainson and confirmed there is not a way to reduce the minimum operating weight required. Both the # DL15761 and the # DL14964 use the same brake pad and washer. However, # DL15761 (2,500 lbs) is physically bigger/heavier than # DL14964 (1,500 lbs) and uses two drive shafts instead of just one like the smaller winch. That is a big part of why it has the heavier weight requirement and heavier weight capacity. An even better solution for you than either...
    view full answer...
  • Winch Cable Length Recommendation for 24 ft Pontoon Boat
    A 25 foot long winch cable like the part # FWC3250100 would work great for your setup. This would pretty easily be long enough to get your boat pulled up onto the trailer. This is 3/16 inch diameter. The diameter you need though will be based on your winch. Other diameters we offer are the # DL24100 which is 1/4 inch, part # DL24102 which is 5/16 inch, # DL24047 which is 7/32 inch, # DL24043 which is 3/16 inch.
    view full answer...
  • How To Install Winch Cable On Fulton High-Performance Brake Winch F143201
    I would be happy to help you get the winch cable installed on your Fulton High-Performance Brake Winch # F143201, but unfortunately there is no online install instructions for this. To get the steel cable installed you will need to pass the cable from the inside of the drum through one of the dimpled holes in the outer plate. Next loop the cable around the drum bearing, under itself, and leave 1" of cable extending past the built in clamp location. Tighten down the clamp to keep the cable...
    view full answer...
  • Winch Recommendation for 24 Foot Long Pontoon Boat that Has Auto Brake
    When picking out a boat trailer winch in general the ratio of weight capacity to boat weight is 2:1 and most 24 foot pontoons like yours are 1,200 lb so you could pretty easily get a way with a 600 lb winch. But if you have a long winching distance and wooden bunks the ratio goes to right at 1:1. That said, the higher rated the winch the easier is to handle, and since you want an auto brake I'd highly recommend the very high quality and easy to use Dutton Lainson Winch you mentioned part...
    view full answer...
  • Recommended Winch for Loading Cars On and Off of a Flat Bed Trailer
    Pulling cars onto a trailer will undoubtedly require pulling the vehicle up an incline, which will add extra resistance to the equation. If you are pulling a rolling load, not dragging the car and no flat tires, up just a slight incline like a 3 degree slope the weight capacity of the winch can be multiplied by 6.67 times, see hand winch article, Winching on an Incline, which I have linked for you to review. A steeper incline causes more resistance and reduces the rolling load capacity...
    view full answer...
  • Replacement For Shelby 5409B Trailer Winch
    Shelby has long been out of business so you'll need to replace your 5409B winch, and for that go with the Dutton-Lainson Hand Winch # DL14830. This is a 2,500 lb winch with a brake which is similar to yours and for cable that works with it use part # DL24102.
    view full answer...
  • Hand Winch Recommendation for a 5,500 Pound Capacity Single Car Hauler Trailer
    You can ask as many questions as you want, no problem! So, first, yes, you can use a pulley block to double the capacity of a winch at half the speed so you will not have to worry about that. With a rolling load though you may not have to. A rolling load, using a 2500 pound winch up as steep a grade as 45 degrees the winch capacity is 3,225 pounds at the first layer or so of wire rope on the drum. At a 26 degree incline you are looking at a capacity of 4,650 pounds. I have included a...
    view full answer...
  • Pontoon Trailer Winch with Wire Cable Recommendation
    The Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,500 lbs # DL14825 you asked from is able to use 5/16 inch by up to 47 foot wire cable. I recommend using the Hand Winch Cable with Safety Hook 5/16" Diameter x 25' Long - 2,500 lbs # DL24102 with this winch.
    view full answer...
  • Does Dutton-Lainson DL14825 Hand Winch Have a Neutral Play Out
    It does indeed. If you flip the pawl vertically toward the line spool, you can easily play out the line but be sure to avoid the handle because it will spin when the line is playing out. The winch can be used with a strap like # DL24249 or with 5/16 inch cable like # DL24102. I've linked to a product description video for the Dutton-Lainson # DL14825 2500 lb capacity hand winch.
    view full answer...
  • Recommended Brake Winch For Single Davit Boat Lift Application
    I spoke with my contact at one of our winch suppliers. They told me that for the use you described and for a single davit used on a boat lift the best winch would be a brake winch. Depending on the weight of the boat you have the brake winch I recommend the Dutton-Lainson Self-Locking Brake Winch, part # DL15721. This winch has a 2,500 lb weigh capacity and has a fully automatic brake meaning the load stays in place even when the handle is released. This winch can handle up to 34 ft of...
    view full answer...
  • Does Dutton-Lainson Hand Winch W/ Brake DL15721 Include A Winch Cable Or Strap?
    The Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs # DL15721 you were looking at does not include a cable or strap. You will need either the Hand Winch Cable with Safety Hook 5/16" Diameter x 25' Long # DL24102 or the Hand Winch Strap with Safety Hook, 2" Wide x 20' Long # DL24251. I included videos for each of the products mentioned for you to take a look at.
    view full answer...
  • Cable Recommendation for Dutton Lainson Winch DL14881 that is Thicker in Diameter than 1/4 inch
    You could use the 3/16 inch diameter cable part # FWC3250100 with the Winch part # DL14881 as this cable is a 3/16 inch cable with a capacity of 4,200 lbs.
    view full answer...
  • Availability of Replacement Handle for Fulton Model 881 Winch
    According to our contact at Fulton, replacement parts for your Fulton Model 881 Winch are no longer available from the manufacturer. We do not currently have a replacement handle available that will fit this winch. Since replacement parts are going to be hard to come by, I recommend looking into replacing the winch with a newer model. I have attached a link that will take you to our available selection of standard hand winches that you can look through. I recommend looking at a model...
    view full answer...
  • Recommended Hand Winch for Use with 5/16 Inch Cable
    The Fulton High-Performance 2-Speed Trailer Winch # F142430 referenced in your question is designed to be used with 7/32 inch cable. I spoke with my contact at Fulton and he does not recommend using 5/16 inch cable on this drum. For a similar hand winch that can use 5/16 inch cable I recommend the Dutton-Lainson Hand Winch # DL14825. This direct drive, heavy-duty winch has a weight capacity of 2,500 pounds and the drum can handle 47 feet of 5/16 inch cable. It also features a Zinc Tuffplate...
    view full answer...
  • Can Dutton-Lainson 15850 Brake Winch Use 1/4 Inch Cable
    Yes, so long as your 1/4" cable is not longer than 45 feet, you can use it with the Dutton-Lainson B2500DL15850 winch, which is the following part number: - Dutton-Lainson Hand Winch w/ Automatic Brake # DL15850 If your cable is too long then go with the shorter 25 foot Hand Winch Cable with Safety Hook # DL24102.
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<