Recommended Winch to Replace Dutton-Lainson DLB1500A

Question

Question:

I have a dutton winch dlb 1500a and would like to replace with a 2 speed winch as it is extremely hard to crank up pontoon. Wire rope Looking forward to your suggestion Thanks

asked by: John T

0

Expert Reply:

Hey John! For a 2 speed winch that will make cranking up your pontoon easier I recommend the Dutton-Lainson Hand Winch # DL14825. This winch has high carbon steel gears and permanently lubricated bearings with a 2,500 lb capacity so it won't have an issue handling the pontoon. It comes with a 5-year warranty and can be used with a wire rope like the # DL24102.

expert reply by: Robin H

0

Dutton-Lainson Hand Winch
(click to enlarge)

Answer 1

I have a potential solution for you but the Dutton-Lainson Hand Winch DL15504 is just a right hand version and can not be changed to left handed. Dutton-Lainson does make a few left handed winches that we carry. Left Handed Winches: The…

view full answer...

Answer 2

Shelby has gone out of business and as such there are no replacement parts we can offer for your Shelby 5470 winch; due to that the best option is going to be a replacement winch. For this I highly recommend the Dutton-Lainson Hand Winch #DL14825…

view full answer...

Answer 3

You can use pulley block #BDW20004 for your winching needs but it is rated at 4,000 pounds so if at any time the full weight of the boat is on the block it would exceed the capacity. For a higher capacity option I recommend #CU881081 which is rated…

view full answer...

Answer 4

We have a winch that will work to replace your Shelby 5353 but we do not carry the exact winch you have. I recommend part #DL14958 which is a Dutton-Lainson single speed winch rated for 2,500 lb and has an automatic brake.

view full answer...

Answer 5

For the similar winch with strap, I recommend the Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,500 lbs #DL14825 and then adding the Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs #DL24249.…

view full answer...

Answer 6

The wire cable will allow you to have a longer lead and will not offer any amount of give. Using a strap can limit the length of the lead. If you will be winching items that need to have the lead wrapped around them, the strap will be gentler on your…

view full answer...

Answer 7

The Kodiak disc brake kit you are wanting part #K2HR35D can be used on your axle but you will just need to go with a different seal instead, part #168255TB. This has the same outer diameter as what the hubs fit but instead has the correct inner…

view full answer...

Recommended Winch to Replace Dutton-Lainson DLB1500A

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching