Erickson Vertical E-Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
(1151 reviews)
Price: $24.87
In Stock
Erickson Vertical E-Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
Item # E19146
Retail:$31.44
Our Price: $24.87
You Save: 21%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (1151)
- Q & A (0)
- Photos
Erickson E-Track - E19146
- E-Track Rails
- Vertical
- 4 Feet Long
- 3-1/2 Inch Wide
- Erickson
4' E-track with vertical slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E-track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.
Features:
- E-track provides tie-down points for securing cargo in your trailer, truck, or van
- For use with E-track straps and anchors (sold separately)
- 4' section with multiple anchor slots is ideal for truck or trailer beds and enclosed trailer walls
- Vertical slots are designed for wall or floor mounting
- 12-Gauge steel contruction is zinc plated for corrosion resistance
- Requires screws or rivets (not included) for bolt-on installation
Specs:
- Dimensions: 4' long x 3-1/2" wide x 1/2" tall
- Safe working load limit (WLL): 2,000 lbs
- Maximum load (break strength): 6,000 lbs
- Diameter of mounting holes: 1/4"
- Mounting hole spacing: 2"
- 90-Day limited warranty
Notes:
- It is recommended that you use a backing plate (sold separately) every 12" for best results.
- Use all mounting holes on this E-track for optimal installation.
19146 Erickson Manufacturing Veritcal Etrack Trailer Cargo Control - 4-Foot Piece
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Did not fit
Customer Reviews
Erickson Vertical E-Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1 - E19146
Average Customer Rating: 4.9 out of 5 stars (1151 Customer Reviews)
4' E-track with vertical slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E-track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.by: David01/30/2021
Great quality, easy installation, made adding shelves to my trailer a breeze. I screwed them into 3/4 inch plywood, instead of the trailer framing, which reduces the weight capacity, however, i'm not storing anything NEAR what these shelves can hold. Everything's screwed together, and the shelves are removable/adjustable. (I have no experience with this type of project.
by: Darrin A04/16/2014
Great item. Made a bed in my trailer.
Darrin A.
5/8/2015
This setup works great and is very stable. Has held me and my wife comfortably. Put a futon mattress on top!
by: Dean05/12/2019
Perfect for adjustable shelving or other items you want to move up and down in your garage or enclosed trailer! I even used them to make a barrier in my tool trailer to keep things in place.
by: Bew Trailer Mom09/01/2023
Nice, strong construction of the chocks, but the paint doesn't seem durable. Rachets and track appear to be good quality
by: Brad Blaha11/14/2013
I received the products just as described it too about 4 working days.
I plan on building shelves into my enclosed trailer for camping gear.
Brad B.
11/14/2014
Well I love the tracks you can do so much with if you do not own any your missing the boat here. I have them in the trailer and they work like a dream. You have lots of adjustments with them.
by: Tom09/21/2016
I installed this track in a horizontal fashion on the side wall all the way around the inside of my trailer. This allows me to secure any size and shape load to the the wall of the trailer as opposed to just trying to tie it off over the top, much more secure and adaptable than just using the tie offs on the outside of the trailer. It was easy to install and is a snap to use.
by: Matt S12/12/2013
As requested, here are some pics of my e-track installation. I find the raised e-tracks in the floor very problematic and dangerous so I made sure they were recessed. This is now an extremely versatile cargo trailer.
by: Rob R.06/04/2012
Great product, easy to install. I used a 2nd section as a backing plate on our Aluma TK1 trike trailer, with 1/4 inch galvanized bolts, every 3-4 holes. fast shipping, great pricing.
by: Jim S12/09/2016
Received my vertical E track along with my spare tire holder and installed it last night in temperatures that dip down to 9 degrees ! to say the least installed it in record time.
Had no issues with either product I gave both products a five star rating.
by: Philip04/10/2021
I have an enclosed trailer and needed some way to secure items to the sides. This product is just the right thing for this. I have used these to secure items and they work great. Highly recommend this product.
by: Dan S.04/05/2020
Works great when vertical strapping is needed and space is tight!
by: Paul D. 07/17/2017
I haul live bait on a galvanized trailer. The e-track system is ideal for my application. The salt water doesn't affect anything and works great. I also use it to secure UTVS. I couldn't be more happy with the products and the service.
by: Scott06/08/2022
Worked great. Easy to install. Sturdy. Made it so we could make an adjustable height queen mattress bed frame in the trailer and store bigger things under the bed if necessary.
by: Barbara K08/07/2017
Modified this cargo trailer to haul RC airplanes(too big to fit in my pickup) and remove the upper deck to make it useful for hauling other items. This makes a truly utility cargo trailer. Numerous tie downs with Etrack is really great. I have other pics if your interested. I just purchased an enclosed car hauler and I plan on installing Etrack in it. Thanks for making great products !
by: George11/10/2017
I mounted this vertical E-Track to the steel stud on the front inside wall of my trailer. It holds my spare tire up and out of the way very nicely. It also provides an additional place to hook my straps. The steel stud isn't very wide, so I was only able to use the mounting holes on one side of the track, and I mounted it on top of the paneling, and it's holding up very well!
by: Doug09/08/2019
Installed the vertical e track. Only issue I had was that the track installation holes are spaced further apart than the trailer frame is wide. Fixed the issue by using short screws to install track over frame into the plywood, than drilling holes in order to use longer screws to go thru plywood into metal framework. Loaded the trailer, strapped everything in, and drove 350 miles to the jobsite. Everything was secure upon arrival. Product worked well.
by: Fred R.03/02/2020
I purchased the vertical tracks to be used with the storage hooks. Installation was very straight forward and I have eliminated various articles previously on the floor and are now carefully organized on the trailer wall by using the above system. Overall I am very satisfied and feel they accomplished their purpose.
by: Raymond01/11/2019
I totally love E-Trac !! Where would I be without them ?? Totally flexible and versatile!!
by: Gerald D02/26/2014
This is an excellent product. It was perfectly suited to what I wanted to do. See attached picture.
by: Alan d04/29/2017
Etrailer supplied the equipment I needed at a great price and shipped the the northwest coast with on days from when I placed the order.
All the e-track hardware and equipment was in stock and arrived packaged very well with no shipping damage.
The e-track is heavy duty, much more than I had expected and it was easy to install.
Looking forward to upgrading my trailer even more from etrailer.
Thanks again!
by: Jason 02/25/2021
The track is good. I have not gotten to use it much since I put it in a trailer that is used for sound engineering and the coronavirus pretty well squashed all the business. But I like it and I'm happy with the product.
by: Wayne C.08/07/2017
Just received the E-Track chocks for my cargo trailer. They were back ordered but everything else I ordered arrived quickly and in good shape. The chocks took a little while but the communication was very good from Cathy T. at etrailer, the customer service is outstanding.
by: Rob G.08/22/2013
I ordered some E-Track and d-rings for said track from etrailer. The customer service was excellent and the product arrived within 4 days, even though I only used standard shipping. The track and rings are high quality (although I'd prefer they weren't made in China), and the customer service from etrailer was awesome. I will definitely use them for future needs.
by: Greg L04/14/2017
This review is more about etrailer than the products I bought though the e-track and associated snap locks are top shelf tie down equipment. Between the selection of products, their quality and the top notch customer service, I won't buy from anyone else if etrailer has what I need. My supplies came well packed and timely.
25
1083
Show More Reviews
See what our Experts say about this Erickson E-Track
- What is the Finish on the E-TrackThe E-Track # E19146 that you referenced is galvanized to resist corrosion. I attached an install video for this product for you to check out also.
view full answer... - Can the Vertical E-Tracks Be Used Horizontally on a Trailer Side RailYes, you can use E-Track # E19146 on your trailer side rails. The Horizontal or Vertical indicates which way the slots on the bar run. But ideally you would use the vertical running slots if mounting on a wall or side rail. I included a link to a video review of E-Tracks for you.
view full answer... - Can the Erickson E-Track Trailer Cargo Control # E19146 Be Welded to the Deck of a TrailerThe Erickson E-Track Trailer Cargo Control, # E19146, can be installed with screws, rivets, or by being welded to the steel deck of your trailer. This track system is very versatile and can be used for a wide variety of applications.
view full answer... - Mounting the Erickson Vertical E-Track to the Side Wall of an Enclosed TrailerWhen mounting vertical e-track, like # E19146, the type of hardware used will depend on what the material of the surface is made of that you are mounting the e-track on. If you are mounting tracks on a standard plywood surface then you could you 1/4 inch wood screws. However, if the surface you're working with is sheet metal, then you would need to use a fastener that is rated for use on metal surfaces. The e-tracks do not come with hardware because of the different possibilities of...
view full answer... - Are 2 Screws Every 24 Inches Enough to Mount a 4 Foot Section of E-TrackYou definitely want to attach the E-Track # E19146 to the support structure of the trailer but given that they are spaced 24 inches apart on your trailer that doesn't provide much of an attachment for a 4 foot section. What I suggest is to attach a longer board the length of the trailer attached to all of the supports and then attach the E-Track to that so that there are more connection points for everything which would be much more stable.
view full answer... - Mounting Erickson E-Track # E19146 to 6x12 Utility Trailer Deck for Hauling Polaris 900 RZRUsually every third mounting hole in the E-Track should have a screw securing it to the wood trailer deck; please see photo. For your 1190 pound load this should be sufficient. The one and three-quarter inch hex head wood screws you plan to use are a good choice. It would be beneficial to mount some of the screws through the trailer's metal frame, if possible.
view full answer...
- Can E-Track Install in Trailer Application Where One Side Only Attaches to MetalYour setup would be totally fine. Especially considering this is a bed application where the force will be straight down. Every third hole on the metal side and every other on the wood would be more than adequate and would be super solid.
view full answer... - Are Snap-Loc Accessories Compatible with Erickson E-Track TracksYes, the Snap-Loc accessories are compatible with the Erickson E-Track Tracks like part # E19146. I have included a link to all of our E-Track tracks and accessories for you.
view full answer... - Dimensions for Erickson Vertical E-Track E19146The Erickson Vertical E-Track - Zinc Coated Steel # E19146 referenced in your question is 4 inches long x 3-1/2 inches wide x 1/2 inches tall. The diameter of the mounting holes are 1/4 inches and the mounting hole spacing is 2 inches. I have attached a short demonstration video on this product for you to check out.
view full answer... - How to Mount E-Track Cargo Control System To Inside of Enclosed TrailerThe Erickson E-Track Trailer Cargo Control tracks, # E19146, are intended to mount to the structural components of a trailer. These locations provide the most secure mounting to ensure your cargo remains stable within your trailer during transport. Without a secure mounting location you will not be able to use the full 6000 pound working load limit provided by the tracks. So you will definitely want to secure the plywood to one of the structural components. The attached video may be helpful....
view full answer... - Installing Horizontal E-Track to Interior of TrailerThe method you'd use attaching the E-Track to a trailer will would depend on the structure of the trailer wall and what exactly it's constructed of. If the interior walls of your trailer have uprights of sufficient thickness to handle the length of self tapping screws you're using, self-tappers would be a great method of attaching the E-Track if you're attaching to metal. Lag bolts would be better if you're attaching to wood.
view full answer... - Does Brophy 5 Gallon Bucket Holder for E-Track # ETBHB Mount In Vertical or Horizontal E-TrackThe Brophy 5 Gallon Bucket Holder for E-Track # ETBHB that you referenced is designed to mount in vertical e-track like the # E19146.
view full answer... - Is There a Way to Create a Second Floor in an Enclosed Trailer Using E-Track ComponentsE-track offers a wood beam socket part # 59149 which can fit in the vertical E-track part # E19146 that you referenced. This would be perfect for creating a second floor/deck in the trailer. I attached an install video for you to check out as well.
view full answer... - Availability of Vertical E-Track Where the Slots are Stacked On Top of Each OtherSounds like you are looking for vertical E-track like the part # E19146. This is e track that is similar to the # SLSZ you referenced but with the tracks stacked on top of each other instead. The mounting holes are 2-3/4 inches apart from side to side and 2 inches apart vertically.
view full answer... - Does the E-Track Wood Beam Socket # 59149 Have a Weight CapacityThe E-Track Wood Beam Socket # 59149 that you referenced doesn't have a capacity listed for it because the wood installed in it would break long before it would. To install the vertical E-track sections like the 4 foot section part # E19146 you could use self-tapping screws. I attached an install video for this for you to check out as well.
view full answer... - How Much Weight Can the E-Tracks Hold Attached To PlywoodYes, you can use wood screws to secure the e-tracks to the plywood walls in your trailer. However, as you mentioned the weight capacity would be less than if you were to attach them to metal beams. The tracks themselves can handle up to 2,000 lbs but the weight capacity of the system is always going to be limited to how they are attached. Unfortunately, there would be no way to give you specific figures or ratings when attached to plywood as there are just too many factors involved such...
view full answer...
- Can E-Track Accessories be Inserted Into the Track from the SideOnce an accessory is inserted into E-Track you will not be able to pull it out no matter which direction it is being pulled from. This is because of the way it installs in the track. To use an E-track accessory you will need to insert the item in the slot long ways. So you would push in the little button, fit the bottom of the item in the bottom of the slot, push the item back at the top, then let go of the button. You would not be able to angle it in from the side. Take a look at the...
view full answer... - Is there a Recommend Height from the Floor E-Track Should be Mounted in a TrailerThere isn't a specific height from the trailer floor recommended to mount the E-Track. My gut feeling is that if 3 feet is too low and 4 feet is too high then 3-1/2 feet might be perfect. Another option is to mount E-track pieces vertically along the walls of the trailer so you have more height adjustment (but less front to back adjustment). You would likely need at least 4 pieces of E-Track for this. You could use vertical E-Track # E19146. I have linked a video showing how we installed...
view full answer... - Horizontal or Vertical E-Track for the Floor of an Enclosed TrailerFor the floor of your enclosed trailer the most popular setup would be the horizontal E-tracks like part # E19148 which is a 5-foot section. Typically the vertical sections like part # E19146 are used on the walls of a trailer and not the floor.
view full answer... - E-Track Recommendation for 5 x 8 Haulmark Transport Deluxe Cargo TrailerThe Erickson E-Track is very versatile so they isn't a specific size or model for your 5 x 8 Haulmark Transport Deluxe Cargo Trailer, just install as much or as little as you want, on the deck or on the wall. I have included a link to all of the E-Track tracks, as well as the accessories, for you. If this were my trailer, in order to accommodate a variety of different loads, I would install 2 of the 5 ft Long Horizontal E-Track, # E19148, on the deck of the trailer and 4 of the 4 ft Vertical...
view full answer...
- E Track Trailer Cargo Control # E19148 Mounting Location for Securing a Harley In Enclosed TrailerI would recommend that you run the tracks horizontally, that way you could secure your Harley from multiple points around the bike to the E-Track Trailer Cargo Control - Horizontal - 5 Foot Long, part # E19148. I included a link to a video review of this product below for you to check out. I would also recommend using a E-Track 2 inch D-Ring, 3.5K, part # E59143, to make securing your bike with straps easier. I have included a link below to a video of the # E59143 on a horizontal # E19148. The...
view full answer... - Can You Build a Bed With the Erickson Vertical E-Tracks and Move It Up and DownIt is indeed possible to build a bed using the Erickson Vertical E-Tracks like part # E19146 for example. In order to do so you will need some brackets like the CargoSmart Shelf Brackets part # 3481726 or CargoSmart Board Holder part # 348892 and some lumber. That said, you would not be able to move the bed up and down as a whole. If you did not attach the bed to the bracket then you could so in only a few pieces but since the bed would be pinned between the tracks you couldn't lift it...
view full answer... - Is the Top Part of Rackem Spare Tire Rack for Enclosed Trailers Available By ItselfThe top part with the hook on the Spare Tire Rack for Enclosed Trailers, # RA-16, is not available as a separate part. A lot of customers who purchase this carrier also add some additional e-track like # E19146, perhaps for exactly the same reason.
view full answer... - Vertical or Horizontal Etrack for Securing Bed to Cargo Trailer FloorSince your plan is to put the etrack on the lowest part of the trailer walls as possible I think vertical etrack like part # E19146 would be the best. But if you wanted horizontal it would work well too realistically. For that part # EM19147 would be what you need.
view full answer...
Do you have a question about this E-Track?
Info for this part was:
Video Edited:
Zack K
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Chelsea B
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Matthew S
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Branden
4/17/2015
haha thats awesome I was thinking of doing that exact same thing.. work well and stable??