bing tracking image
  1. Accessories and Parts
  2. CURT
  3. Weight Distribution Hitch
  4. Shanks
  5. Fits 2 Inch Hitch
  6. Round - 9 Inch Drop
  7. Trunnion - 7 Inch Drop
Curt Weight Distribution Shank 13" Long - 9" or 10" Drop - 1,500 lbs TW
CURT

Curt Weight Distribution Shank 13" Long - 9" or 10" Drop - 1,500 lbs TW

Part Number: C17124
In Stock
$135.50
Retail:$172.47
You Save: $36.97
Accessories and Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
14-1/2" Tall shank offers a 10" drop when used with round-bar systems and a 9" drop when used with trunnion-bar models. Fits 2" trailer hitch receivers. Designed for use in the drop position only. 1-800-940-8924 to order CURT accessories and parts part number C17124 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt Weight Distribution Shank 13" Long - 9" or 10" Drop - 1,500 lbs TW. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (124)
  • Q & A (0)
  • Photos

CURT Accessories and Parts - C17124

  • Weight Distribution Hitch
  • Shanks
  • Fits 2 Inch Hitch
  • CURT
  • Round - 9 Inch Drop
  • Trunnion - 7 Inch Drop
  • 1400 lbs TW

14-1/2" Tall shank offers a 10" drop when used with round-bar systems and a 9" drop when used with trunnion-bar models. Fits 2" trailer hitch receivers. Designed for use in the drop position only.


Features:

  • Shank slides into your hitch receiver and provides the attachment point for your weight distribution system's head assembly
    • Designed for use with Curt weight distribution systems
  • 6 Adjustment points for attaching the head assembly
    • Lets you level your trailer with your tow vehicle
  • Drop position available to fit your application
  • Black powder coated steel resists rust and corrosion


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Weight capacity: 15,000 lbs
  • Tongue weight: 1,500 lbs
  • Adjustment holes are spaced 1-1/4" apart on center
  • Maximum drop:
    • Round bar system: 10"
    • Trunion bar system: 9"
  • Overall shank height: 14-1/2"
  • Overall shank length: 13"
  • Distance from center of shank pin hole to back of adjustment shank: 8"
  • Distance from center of adjustment holes to center of shank pin hole: 9"
  • Distance from front of shank to center of shank pin hole: 10"
  • 1-Year limited warranty


Note: Not for use in the rise position.


Dimensional Diagam



17124 Curt Weight Distribution Shank




California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

124 reviews
14-1/2" Tall shank offers a 10" drop when used with round-bar systems and a 9" drop when used with trunnion-bar models. Fits 2" trailer hitch receivers. Designed for use in the drop position only.

by:

Very happy with the product and purchase. I ordered it to help with drop for a weight distribution hitch. My particular hitch when combined with the new shank gave me 8" of drop which was perfect for my needs. Other weight distribution hitches may measure different and everyone should do their due diligence. The 13" overall length was perfect for me as my hitch required that much. No dragging the ground or other issues. A little more than what I wanted to spend but well worth it. The 1500 lb rating is a little more than I need which makes it perfect for not having to worry and be stressed when towing. So proud of my purchase. It has made me confident and relaxed while towing. Thank You to all of you who make the product available.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

12/4/2025

This is awesome to hear, Timothy. I do have to say I agree that even though the weight capacity is more than what you need, does give that boost of confidence when towing. What kind of trailer are you towing? Anything fun?



by:

Great product heavy duty it’s perfect for my truck got here really fast now My rv will be leveled thanks etrailer for the fast shipping

Jorge O. profile picture

Jorge O.

5/5/2019

Great! Still getting the job done



by:

First and foremost I was so meaning to email you shortly after we got this receiver/hitch on, but I forgot. Second, you were extremely helpful and knowledgeable with the details about this hitch, before we bought it, so we thank you for that!! And last but not least, we were so happy with it and it worked out perfect and was the perfect length!!! My husband is more than pleased.



by:

Very nice piece. Just what I needed. I needed to drop my ball 3" on my Pro series weight distribution system and sway bar system going from my 2015 2500HD Silverado to my 2016 Ram 2500HD. I have never been disappointed in any thing I have purchased from ETRAILER.



by:

I haven't towed the trailer yet but my old sway bars fit. got the height I needed. I was wondering why you don't leave a receipt in the box? I'll send you a picture when I get to the track.



by:

Works perfect for my 14' Ram 2500. Truck stock and sits high in rear. This gives me enough drop go get my camper tongue down to 19" which is level for my Camper



by:

The shank arrived earlier today and it was exactly what I wanted. Very prompt service from easy ordering to actual delivery. Fit perfectly. I attached photos of completed installation. Thank you very much!



by:

Great product. Made with solid steel. Delivery was fast and was just the right amount of drop for my 2008 Ford F-350 with an 8" lift and 37" tires.



by:

I needed a drop down shank for my 2019 Ford Ranger, which must also be compatible with my [hardware store]--Haul Master load leveling trailer hitch. etrailer spent quite a while helping me select the correct one. It arrived within a couple of days of placing the order. I installed it and it worked perfectly.

G M. profile picture

G M.

8/28/2020

used it only once for a long haul. worked fine. have since sold it for about 12 of what I paid. overall a good hyitch, but quite pricy.



by:

This one worked absolutely perfect.



by:

Last year I traded my Silverado for a Yukon to tow my 21’ camper. The hitch tube was integrated into the Yukon bumper and those 20” wheels raised the tube height 7”. I purchased your 13” drop shank to level my hitch/camper connection but experienced trailer “sway” because of that long shank. I fabricated a set of “sway bars” to tame that movement. Now I can tow my camper safely. Thank you for making this long drop shank available for taller tow vehicles!



by:

We regularly use etrailer for all our hitch/rv needs. The website is easy to use and is stocked with everything we have needed. We have been full time on the road for the last 18 months. We frequently off road with our 33 ft TT. This means we sometimes require replacement parts quickly. eTrailer has always had the part we needed and shipped quickly. If you have questions about the right sizing for your hitch/parts call customer service, they have been very helpful to us as well.



by:

Have used with my 5500 gwr travel trailer. Works good but extremely heavy once the weight distributing head is attached. This unit is affordably priced but I would have paid more to get the same adjustability in HS Al alloy. Had to get all new hitches because the hitch height on my new tow vehicle is way way higher than the old one. Even though I measured carefully, I still was off by one adjustment hole after initial coupling of trailer due mostly to how much the rear did not settle on the tow. So good reason to buy an adjustable hitch unless you are completely familiar with your tow vehicle characteristics when trailer weight sits on the hitch, unless you do not care if your trailer sits level during towing.



by:

The back of our travel trailer was too low to the ground hauling it with our Tahoe. The hitch we ordered corrected the issue and works great!

William G. profile picture

William G.

8/17/2020

We are very satisfied with the quality of the hitch. It is exactly what we needed to haul our travel trailer with our Tahoe.



by:

This hitch shank is extremely well made and heavy duty!!!
Impressive is an understatement.



by:

Excellent products, great prices, I always buy my trailering products from etrailer. Shipping is fast and I would recommend them to anyone. I have a lifted truck pulling a trailer, this adjustable drop-down hitch is heavy duty and exactly what I needed.



by:

I needed a shank that would allow me to lower the weight distribution hitch I use on my Yukon. This shank was perfect. It allowed me to adjust the hitch until my horse trailer was level while attached to my Yukon.



by:

The product was exactly as described looks well made and was what I needed. The best part was ordering from etrailer the first one that shipped was lost by UPS. But you guys didn't hesitate and sent me another one 3 day and I recieved it. I know the shipping isn't cheap on a heavy product like that but you didn't charge extra you have gained a new customer for all my trailer needs and would highly recommend you to anyone thanks.



by:

HAve yet to install, but the part is rugged and was shipped very quickly by etrailer..So far so good

Chris H. profile picture

Chris H.

6/25/2018

excellent built product, turned out to be too short for my needs..This is not the problem of the manufacturer



by:

i switched from a 2014 Ram 1500 to a 2014 Ram 2500. the height difference did not work for my distribution set up on my travel trailer.
i needed about 6 inches of drop. this shank provided exactly what i needed and it worked well with the Blue Ox set up i had.



by:

Just what I needed to drop the ball height on my new Ram 2500. The Reese weight distribution head bolted right up and the Airstream is sitting as level as can be. Very satisfied. Thanks, etrailer for great service and on time delivery.



by:

Needed to replace the shank on my Reese dual cam hitch because my new truck was much higher. The Curt drop shank worker great. Since know one states the dimensions the drop length is 13.5 inches.



by:

I am very satisfied with my purchase. Customer Service was very helpful and prompt in resolving an issue with my order of the equalizer weight shank. Thank you again for a great product. My travel trailer will now roll down the highway perfectly.



by:

Shipped ahead of time and product was just as advertised. I will post pictures of my camper with leveling and anti sway hitch soon. Customer service was great--seems like a family owned business that actually believes in what it makes and wants all customers to be informed and satisfied.



by:

Received product as described in a very timely fashion and look forward to putting it to use very soon! I ordered this to adapt my husky weight distribution hitch to fit onto my truck after I jacked it up.


25
124
Show More Reviews

See what our Experts say about this CURT Accessories and Parts

  • Hitch Extension For 2-1/2 Inch Trailer Hitch Receiver To Use With Camper With 23 Inch Overhang
    The Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long # C45048 is the best extension we carry for your need. However, it is limited to 6,000 lbs when extended 24 inches, so it will not work for your application. You will need to go with the Superhitch. If you let me know your model year, I can give you a recommendation.
    view full answer...
    Image 1 for
  • Drop Shank Options for Husky Centerline Weight Distribution System
    All of the weight distribution systems use the same shank mounting dimensions so other brands of weight distribution shanks can be used with your Husky Centerline TS. If you need just a few more inches of drop the Curt shank part # C17123 would work well. For a bit more of a drop the # C17124 would work well. The largest drop we have is the part # C17125 which probably would be too much for you setup.
    view full answer...
  • Recommended Drop Shank for Fastway e2 Weight Distribution System
    The Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA94-00-0600 will allow you to use the Fastway e2 Weight Distribution Shank # FA92-02-4214 to get the extra clearance you desire without compromising the capacity at all.
    view full answer...
  • How to Determine Correct Drop for Weight Distribution Shank
    To find the correct rise or drop what you need to measure is the from the ground to the top of your hitch receiver opening, which it sounds like you have done and got 25-1/2". You also need to measure from the ground to the bottom of the coupler. You said the trailer is 18-1/2" off the ground so you just want to be sure this measurement is to the bottom of the coupler. The correct drop for a weight distribution shank will be the difference between the hitch height and coupler height, which...
    view full answer...
  • Recommended Weight Distribution Shank for Drop with Fastway e2 System
    Because the top of the receiver opening can have different size collars from hitch to hitch, we measure from the top of the inside opening to make sure it is consistent. I've attached an article to assist. The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion # FA92-00-0450 has a maximum rise from the ball platform of 6 inches, and maximum drop of 2 inches and adjustments 1-1/4 inches in between. If the top of your receiver opening is 20.5 inches and the bottom of your...
    view full answer...
  • Weight Distribution Shank that Has Most Drop
    To determine how much drop/rise you need you need to measure from the top of the hitch opening on your Tahoe down to the ground and then while your trailer is level measure from the bottom lip of the coupler to the ground. The difference between these dimensions is the drop/rise you need. The shank we have with the most drop is the Curt # C17125 which can do a drop of up to 16-1/4 inches if the system is a round bar system or 15-3/4 inches if the system is a trunnion bar.
    view full answer...
  • Weight Distribution Shank Recommendation for Needing Hitch Drop of 10 inch
    The Curt shank part # C17124 can do up to a 9-1/2 inch drop when used with a round bar setup like your Fastway E2 round bar weight distributions system. The next largest drop we have would be the Curt shank part # C17125 which can do a drop of up to 16-1/4 inches which may be a bit too extreme.
    view full answer...
  • Recommended Drop Shank for Weight Distribution Systems
    Thanks for the pictures! The only thing I would recommend changing on your set up is to add a shank with a deeper drop. I recommend the Curt Weight Distribution Shank 13" Long item # C17124 which has a 9" drop. This would move the bars below your trailer's frame. It would also allow you to mount the sway ball bracket correctly on your item # C17422 system. You have it mounted vertically instead of horizontally on your frame.
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for Image 5 for
  • Weight Distribution System Compatible With Lifted Truck
    The Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW # C17062 is not available without the shank. For your raised truck, you can interchange companies for the shank head, however the companies may void your warranty. I recommend using the Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment # C17123, for your lifted truck. This will give you a maximum drop of 8-1/2 inches. If you need a bigger drop than that, you will need to use # C17124.
    view full answer...
  • Will I Need a Longer Weight Distribution Shank if I Switch to a Lifted Truck?
    If you only have the shank that came with your Blue Ox SwayPro system, then you will almost definitely need a longer shank to tow with a lifted F-350. The good news is the brand isn't all that important because most shanks are interchangeable between brands and we can help you figure out what size shank you will actually need. I attached a help article to this page that talks about how to find the correct rise or drop for a ball mount. Basically, you will just want to get your truck and...
    view full answer...
    Image 1 for
  • How to Determine Correct Rise or Drop for Blue Ox SwayPro Weight Distribution System
    Determining the correct rise or drop for your Blue Ox SwayPro Weight Distribution System # BXW1000 is going to be the same method as determining rise or drop for a standard ball mount. You will just need to measure from the ground to the top of your hitch receiver and from the ground to the bottom of the trailer coupler, and the difference will be the amount of rise or drop you need. Since it sounds like your hitch sits higher, that means you a shank with the right amount of drop. The...
    view full answer...
  • Will a Curt Weight Distribution Shank Fit a Husky Weight Distribution System
    Husky has 2 different types of weight distribution shanks. One of them uses 3/4 inch diameter holes spaced 1-1/4 inches apart on center. If that is what you have then the Curt shank # C17124 will work. But if the shank you have has a smaller hole diameter to mount the head then it will not work.
    view full answer...
  • Replacement Shank Recommendation for Older Reese V5 Weight Distribution System
    Thank you for the photo and explanation! We do have a variety of replacement shanks that will work great for your older Reese V5 weight distribution system. Since you're looking for something with a larger drop I recommend checking out the Curt Replacement Shank # C17124 which has the adjustment holes located further down on the shank. I'm attaching some review videos for you to check out as well as our list of replacement weight distribution shanks you can filter through on your end...
    view full answer...
    Image 1 for Image 2 for
  • Will Curt Weight Distribution Shank C17124 Work with Husky Weight Distribution System HT32218
    Yes, you can use the Curt weight distribution shank # C17124 along with the rest of your Husky Center Line weight distribution system # HT32218. With few exceptions the shanks from WD systems can be interchanged between brands. The hole size and spacing on the vertical portion of the shanks is standardized.
    view full answer...
  • Replacement Weight Distribution Shank For EAZ-Lift R3 WDH
    Yes, you can use the Curt Weight Distribution Shank # C17124 will work with your EAZ-Lift R3 Weight Distribution Hitch. Weight distribution shanks from different brands are all made with a standard hole diameter and spacing. This shank is made for 2" x 2" trailer hitch receivers, has a maximum weight capacity of 15,000-lbs, and a maximum tongue weight of 1,500-lbs.
    view full answer...
  • Replacement Weight Distribution Shank for 2-Inch and 2-1/2-Inch WD Systems
    The good news is that weight distribution shanks from different brands are all made with standardized hole diameter and spacing so it is possible, for example, to use a Reese shank with an Equal-i-zer head and vice-versa. We don't offer your specific brand but we do have many shanks available for both 2-inch and 2-1/2-inch hitches. For a 2-inch shank that will give you about 8-inches of drop you can use Reese shank # RP3344 (good to 1400-lbs tongue weight) or Curt # C17124 (good to 1500-lbs...
    view full answer...
  • Would the # BA-1 Fit a Curt or Reese Weight Distribution Shank
    The # BA-1 fits the typical size for weight distribution shanks like the part # C17124 or # RP54977. The holes are 3/4 inches wide and are spaced 1-1/4 inches apart.
    view full answer...
  • Will Curt Shank Work with Fastway e2 Weight Distribution System
    Yes, you can use the Curt shank # C17124 with a Fastway e2 weight distribution system. The shank has 3/4 inch bolt holes to mount the head and they are spaced 1-1/4 inches apart on center. This is the same as what the e2 system requires.
    view full answer...
  • Tall Drop Shank Available for Use with Husky Weight Distribution on Lifted Vehicle
    You are going to need quite a bit of drop since your truck is lifted so high. The one with the most drop that we offer that would work well is the Curt # C17125. This shank has 20-7/8 inches from the top of the shank down to the very bottom like what you see in the picture I attached. For a drop shank with not quite as much drop we have the # C17124 which has 13-1/2 inches instead. Both of these will work with a Husky weight distribution system.
    view full answer...
    Image 1 for
  • Weight Distribution Recommendation for Trailer with 600 lb Unloaded Tongue Weight
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. Your tongue weight being around 600...
    view full answer...
  • Equal-i-zer Weight Distribution Without Shank For Forest River Vibe Trailer w/ 840 lb Tongue Weight
    We can absolutely help you out here, and it makes sense that you'd be getting more sway than you want with an 8,000 lb Fastway system since it isn't rated quite high enough for the 840 lb tongue weight of your loaded 2021 Forest River Vibe. You did make a great choice with the Equal-i-zer weight distribution hitch with a tongue weight capacity of between 600 lbs and 1,000 lbs, which is exactly what you'll need for your tongue weight. The Equal-i-zer's four points of sway control is double...
    view full answer...
    Image 1 for
  • Weight Distribution Shank for a 2022 Ram 2500 Using a Husky Centerline TS Weight Distribution System
    The Curt Weight Distribution Shank # C17124 would be 13" long and provide 9" of drop since your weight distribution system is trunnion style. This also fits a 2" shank so you would need a hitch reducer sleeve like the B&W Hitch Receiver Reducer Sleeve # BWRHXA2182 which would allow you to use the 2" shank in your 2-1/2" hitch. We do not have a shank that does everything you are looking for, this is the closest we had to the 14" long with 9" drop that you are looking for.
    view full answer...
  • Weight Distribution Shank with Enough Drop to Level a Trailer with a 2020 Chevrolet Silverado 2500
    If you're looking for a weight distribution shank that will be able to make up for the height difference between your 2020 Chevrolet Silverado 2500 and your trailer, then the most important factor is the drop length of the shank. To determine how much of a drop you need, you have to measure how high your vehicle's hitch and your trailer's coupler are from the ground. Measure to the inside top of the receiver tube on your truck and to the bottom of the coupler on the trailer. The difference...
    view full answer...
  • Difference Between Reese RP3344 and Curt C17124 Weight Distribution Shanks
    The Reese # RP3344 and Curt # C17124 Weight Distribution Shanks that you referenced are interchangeable with regards to the weight distribution heads that they fit but they differ in their lengths, capacity, and the amount of drop they can provide. The Reese # RP3344 will give you a maximum drop of 8-5/8 inches if used with a round bar system or a drop of 7-5/8 inches with a trunnion bar system. It has an 11 inch length and a 1,400 pound tongue weight capacity. The Curt # C17124 on the...
    view full answer...


< Previous
123. . .6



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Hannah L
Updated by:
Hannah L
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Carrie F
Updated by:
Carrie F
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Cole B
Installed by:
Cole B
Employee Shane H
Installed by:
Shane H
Employee Andy C
Installed by:
Andy C
Employee Chris R
Video Edited:
Chris R

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<