1. Trailer Hitch Ball Mount
  2. Convert-A-Ball
  3. Adjustable Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 10 Inch
  6. Rise - 9 Inch
Adjustable Ball Mount for 2" Hitches - 9" Rise to 10-1/4" Drop - 5,000 lbs

Adjustable Ball Mount for 2" Hitches - 9" Rise to 10-1/4" Drop - 5,000 lbs

Item # TK5007
lowest price pledge
Our Price: $80.62
You Save: 22%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 15 lbs
In Stock
Convert-A-Ball Adjustable Ball Mount - TK5007
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Convert-A-Ball adjustable ball mount is ideal if you will be using 1 vehicle to tow trailers with varying coupler heights. The shank provides a drop of 4-1/4" to 10-1/4" or a rise of 3" to 9". The GTW is 5,000 lbs. Lowest Prices for the best trailer hitch ball mount from Convert-A-Ball. Adjustable Ball Mount for 2" Hitches - 9" Rise to 10-1/4" Drop - 5,000 lbs part number TK5007 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (17)
  • Q & A (9)
  • Photos
  • Why etrailer?

Convert-A-Ball Trailer Hitch Ball Mount - TK5007

  • Adjustable Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 10 Inch
  • Rise - 9 Inch
  • Convert-A-Ball
  • No Ball
  • Class III
  • 5000 lbs GTW
  • Steel Shank

Convert-A-Ball adjustable ball mount is ideal if you will be using 1 vehicle to tow trailers with varying coupler heights. The shank provides a drop of 4-1/4" to 10-1/4" or a rise of 3" to 9". The GTW is 5,000 lbs.


  • Functions as a rise or drop to help you level your trailer
    • Tow vehicle and trailer need to be within 2" of each other for proper weight distribution
  • Slides into 2" square trailer hitch receiver and attaches with standard 5/8" hitch pin
  • Constructed of weather-resistant, coated steel


  • Fits 2" x 2" trailer hitch receivers
  • Towing capacity: 5,000 lbs
  • Tongue weight capacity: 500 lbs
  • Drop range: 4-1/4" to 10-1/4" from top of hitch receiver tube
  • Rise range: 3" to 9" from top of hitch receiver tube
  • Adjusts in 2" increments
  • Ball hole diameter: 1"
  • Shank length: 15-5/8"
  • Distance from center of ball hole to center of hitch pin hole: 13"
  • 2-Year limited warranty

TK5007 Convert-A-Ball Adjustable Ball Mount for 2" Receiver - Max Rise 9", Max Drop 10-1/4"

Customer Reviews

Adjustable Ball Mount for 2" Hitches - 9" Rise to 10-1/4" Drop - 5,000 lbs - TK5007

Average Customer Rating:  4.7 out of 5 stars   (17 Customer Reviews)

Convert-A-Ball adjustable ball mount is ideal if you will be using 1 vehicle to tow trailers with varying coupler heights. The shank provides a drop of 4-1/4" to 10-1/4" or a rise of 3" to 9". The GTW is 5,000 lbs.

- TK5007

awesome 677473

- TK5007

Excellent customer service very quick delivery and product as described 681622

- TK5007

This product was received and installed on the follow day (today). It was installed into a C13587 Curt trailer hitch receiver bought from etrailer previously and installed onto a Mercury Montery FuddyDuddyMoble. My concern all along has been pulling a small boat with this vehicle, but, the video for the this trailer hitch receiver IS THE SAME VEHICLE (but the Ford version) as I have, and mine has a factory installed Class II towing package. EVERYTHING went extremely smooth. etrailer's videos are clear, helpful and instill confidence. This adjustable ball mount slipped easily into the receiver, the pins (2) slipped into the connection easily, AND, the snap lock pins were easily assembled by hand. I was thinking they might require some force with a tool, but it wasn't necessary. I only have one warning about etrailer's recommendations and products: They'll make you think you're a better mechanic than you actually are. 579851

- TK5007

Unit worked, but the fit between the 2.5" adapter and the hitch was loose. It caused the trailer to rock back and forth with every application of the brakes. Had to make shims to stop unit from clanking. Felt like if length of attaching piece was longer it would had helped. Attached picture to help illustrate. 591416

- TK5007

I like it. 898023

- TK5007

Delivered ahead of time The hitch was just what I wanted Very happy with it 896658

- TK5007
by: 09/26/2020

The hitch was exactly as stated. It worked great to be able to lower down and put a little more weight on the towing vehicle to help with handling. 893357

- TK5007

Easy to use and in mint condition. I would definitely buy this product again! 806183

- TK5007

This product works out real well. Yourinstructions on how to measure the rise was perfect. 746213

- TK5007

Product Is Great Fit Great And Very Fast Delivery Very Pleased 729236

- TK5007

Explained that I up graded to a 3/4 ton and needed a adjustable drop that would still use a 1 inch shank ball mount. They found just what I needed and at the best price. 694501

- TK5007

Great product. Perfect for a drop hitc h. 637951

- TK5007

Well made and sturdy. 637000

- TK5007

Just received haven’t used but seems like it will suit my needs 552394

- TK5007

It's just a ball mount but what really stands out is the ease of use of their web site and the excellent delivery time. Have purchased several items in the past and always excellent delivery time. I've never had to contact customer service which in itself say everything. If you need anything to do with trailer or attaching trailer to vehichles this is the place to go. 508556

- TK5007

Great price with quick shipping. Well built and fully adjustable. 472820

- TK5007

Perfect Heavy, but what a reliable set-up! 1308


Ask the Experts about this Convert-A-Ball Trailer Hitch Ball Mount

  • How To Confirm Fit Of Adjustable Ball Mount for 2" Hitches TK5007
    The Adjustable Ball Mount for 2" Hitches part # TK5007 offers up to a 9" rise and a 10-1/4" drop. In order to confirm this will work for your setup you need to measure from the ground to the top inside edge of the trailer hitch and then subtract the distance from ground to the bottom of the trailer coupler while level. That said, you also need to stay under the 5,000 lb weight capacity. In order to add a hitch ball to the above ball mount, I recommend the Convert-A-Ball Interchangeable...
    view full answer...
  • Determining Rise Or Drop Of Ball Mount To Tow Level With Truck that Sits Up High
    It sounds like you need a ball mount with a drop to tow level with your trailer since your truck sits up higher. To figure out how much drop, you want to measure from the top of the receiver hitch on the truck to the ground. Then measure from the bottom of the coupler on the trailer to the ground. The difference between those two numbers is the amount of drop you need. Since I am not sure of the truck measurement I cannot tell you how much drop you need at this time. I have attached a helpful...
    view full answer...
  • Does the Convert-A-Ball Adjustable Ball Mount # TK5007 Come with Hitch Pins
    Yes, the Adjustable Ball Mount # TK5007 comes with 2 pins for the adjustable ball mount part and then a third pin for the shank. If you would like to add some locks to this then you can also get the Trailer Hitch Receiver Lock # e98881 as well. This can take the place of the hitch pin and the adjustable ball mount and can be ordered keyed alike so you can use the same key to unlock the shank and the adjustable ball mount.
    view full answer...
  • 1-7/8" Ball for Adjustable Ball Mount # TK5007
    Yes. You can use 1-7/8 inch ball # 19260 with the Adjustable Ball Mount # TK5007. The ball mount accepts a ball with a 1 inch diameter shank so if you ever need a different ball size make sure it has a 1 inch diameter shank.
    view full answer...
  • Can the Adjustable Ball Mount TK5007 Be Used in Both Rise and Drop Orientation
    The Adjustable Ball Mount # TK5007 can be used as either a rise or drop hitch, so you can use it in either manner without compromising the strength of the setup. This ball mount can be adjusted by either flipping it upside down, or removing the pull pins and flipping the ball mount in the other direction. I've linked a review video we did of this ball mount for you to have a look at, as well.
    view full answer...
  • Can Locks be Ordered for Hitch pin and Platform of Adjustable Ball Mount TK5007 Keyed Alike
    You'd want to order one of the # e98880 for the hitch lock and then two of the longer part # e98881 for the locking pins for the ball mount platform of # TK5007 and if you select "keyed alike" on the product pages of both locks they'll all show up using the same key.
    view full answer...
  • Recommended Extended Ball Mount or Hitch Extender for Towing Boat Trailer
    For your 2018 Tahoe and boat trailer needing a longer extension between them I recommend the Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs # 80232. Having a longer ball mount like this will not reduce the capacity of your hitch at all. This will give you a length of 15-3/4 inches from the center of the ball to the hitch pin hole. For a compatible hitch ball the shank needs to be 1 inch diameter for this mount. I recommend the 2 inch ball # 40038 or 2-5/16...
    view full answer...
  • Adjustable Ball Mount Options For Bumper Clearance and 9 Of Rise
    I do have an options for you but the Flash Solid Steel Adjustable 2-Ball Mount part # FA49-00-5900 measures 3-3/4" from the hitch pin hole to upright portion of the ball mount so it will not clear the bumper of the Chrysler Town and Country. These measurements can be found in the video of the Flash Solid Adjustable ball mount that I have attached. I recommend the Convert-A-Ball Adjustable Ball Mount for 2" Hitches part # TK5007 which provides 9" Rise to 10-1/4" Drop and can be used with...
    view full answer...
  • Adjustable 2-Inch Ball Mount to Allow More Clearance for Garaging Boat Trailer
    It sounds like you need a ball mount with more than 3-inches of drop to allow your boat's windshield to clear the bottom of your open garage door as you move the trailer inside. If I understand things correctly it is just the combination of the windshield's height and the driveway's angle that are the issue. I suggest an adjustable 2-inch ball mount. One of these will allow you to lower the ball and therefore also the trailer's tongue when you need to garage the boat and trailer and...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Leah S
Updated by:
Sarah W
Updated by:
Amanda M
Updated by:
Matthew E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.