Replacement Weight Distribution Shank for 2-Inch and 2-1/2-Inch WD Systems

Updated 05/30/2019 | Published 05/28/2019

Products Featured in This Question

Curt Weight Distribution Shank 13" Long - 9" or 10" Drop - 1,500 lbs TW

(127)

$134.19

Question:

I need a 8” shank for EAZ LIFT RECURVE R3 can u help

asked by: Clinton R

Expert Reply:

The good news is that weight distribution shanks from different brands are all made with standardized hole diameter and spacing so it is possible, for example, to use a Reese shank with an Equal-i-zer head and vice-versa. We don't offer your specific brand but we do have many shanks available for both 2-inch and 2-1/2-inch hitches.

For a 2-inch shank that will give you about 8-inches of drop you can use Reese shank # RP3344 (good to 1400-lbs tongue weight) or Curt # C17124 (good to 1500-lbs tongue weight); note these shanks can only be used in the drop position. All shanks we offer appear on the linked page. Just click on the hitch size, 2-inch or 2-1/2-inch, to see all items in that size.

expert reply by: Adam R