Drop Shank Options for Husky Centerline Weight Distribution System

Updated 07/11/2020 | Published 05/12/2017

Products Featured in This Question

Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment

(238)

$153.89

Curt Weight Distribution Shank 13" Long - 9" or 10" Drop - 1,500 lbs TW

(124)

$135.50

Curt Weight Distribution Shank - 12" Long - 15-3/4" or 16-1/4" Drop - 1,500 lbs TW

(46)

$170.01

Question:

Hello, I recently changed towing vehicles to a 2015 Ford Expedition EL, Im using the Husky CenterLine TS WD hitch with the original supplied shank, it looks like Im going to need more drop, could you recommend a good replacement shank with enough drop for this vehicle please. Thank you

asked by: Andrew H

Expert Reply:

All of the weight distribution systems use the same shank mounting dimensions so other brands of weight distribution shanks can be used with your Husky Centerline TS. If you need just a few more inches of drop the Curt shank part # C17123 would work well. For a bit more of a drop the # C17124 would work well.

The largest drop we have is the part # C17125 which probably would be too much for you setup.

expert reply by: Jameson C

Javid

7/7/2020

I am pulling a 20’ car hauler with a 2015 Tundra that has a 4” lift. Trailer tongue height is 15.5 and ball on truck measures 19. Measured to same respective positions. This is for a Husky Centerline WDH. What would you recommend?