Will Curt Shank Work with Fastway e2 Weight Distribution System
Updated 03/03/2017 | Published 03/02/2017
Question:
I need at least a 7 inch drop for an e2-fastway trunion. can you verify that this curt shank will work? thanks
asked by: Charles A
0
Expert Reply:
Yes, you can use the Curt shank # C17124 with a Fastway e2 weight distribution system. The shank has 3/4 inch bolt holes to mount the head and they are spaced 1-1/4 inches apart on center. This is the same as what the e2 system requires.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Curt Weight Distribution Shank 13" Long - 9" or 10" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Round - 9 Inch Drop
- Trunnion - 7 Inch Drop
- CURT
more information >
Continue Researching
- Q&A: Recommended Weight Distribution System and a 2" Shank w/a 7" Drop
- Q&A: How to Determine Correct Drop for Weight Distribution Shank
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will Weigh Safe Weight Distribution System Help with Sway Over 50 mph
- Q&A: Replacement Solera Awning Component V000436366 Needed
- Q&A: Drop Shank Options for Husky Centerline Weight Distribution System
- Q&A: Can Blue Ox Adjustable 2-Ball Mount Be Used Upside Down
- Q&A: Is There 2.5 inch Shank That Can be Used with Curt 20 TruTrack WD System
- Article: Brake Controller Installation: Starting from Scratch
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: The Best Electric Trailer Jacks of 2025
- Article: Which Sway Control Hitch is Right For Your Trailer?