1. Trailer Hitch
  2. Curt
  3. Class IV
  4. 2 Inch Hitch
  5. 10000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Item # C14082
lowest price pledge
Retail:$402.84
Our Price: $250.77
You Save: $152.07
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 43 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" part number C14082 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (58)
  • Q & A (61)
  • Photos
  • Why etrailer?

Curt Trailer Hitch - C14082

  • Class IV
  • 2 Inch Hitch
  • 10000 lbs GTW
  • Curt
  • Concealed Cross Tube
  • 1000 lbs TW
  • 12000 lbs WD GTW
  • Custom Fit Hitch
  • 1200 lbs WD TW

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 10,000 lbs
      • Maximum GTW when used with weight distribution: 12,000 lbs
    • Maximum tongue weight: 1,000 lbs
      • Maximum TW when used with weight distribution: 1,200 lbs
  • Measurement from center of bolt hole to center of bolt hole: 31-1/4"
  • Limited lifetime warranty


Note: Your vehicle must have 34" frame spacing


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



14082 CURT Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Installation Details C14082 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - C14082

Average Customer Rating:  4.9 out of 5 stars   (58 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

- C14082
by:

Hitch fit good on a 74 Ford super camper special. There we two rivets on the frame for a crossmember that I ground down and drilled out because they were exactly where I wanted the front mounting hole on the hitch to be located. Other than that pretty good.



- C14082
by:

Excellent service, great product. I haven't purchased a lot from ET, but whenever I do I am always impressed. Tons of data to research for your application, help is spot on if you want it, and the quality of what they have is great. This was a class IV Curt hitch. Simply constructed from 4 or 5 pieces. I can't speak to the quality of the steel, but the build looks to be done well.



- C14082
by:
1980 Chevrolet C/K Series Pickup

I stumbled upon etrailer while looking for a hitch for my shortbed squarebody. You guys have all the right info to make selection easy. The hitch went on as designed on my 1980 k10 and tucks up nicely under the old dealer advertising bumper. I’m well pleased and will use y’all again.



- C14082
by:

Really nice and easy to install. It does it’s job



- C14082
by:

It's been difficult searching for the right hitch, that is until I called etrailor.



- C14082
by:
Chevrolet

bought two of these receiver hitches, one for my 1987 GMC V1500 SWB and one for my 1984 Chevrolet K10 SWB. both went on perfectly and look great. Haven't pulled anything yet



- C14082
by:
1987 GMC C/K Series Pickup

We put this hitch on my 1987 GMC 61/2' short box 4WD with a regular bumper with no problems and look real nice and real strong with good load ratings


Comments
real good havent pulled anything yet
Ronald P - 08/29/2017



- C14082
by:
1966 GMC C/K Series Pickup

Great product and was easy to install. Fits good but 1/2" holes will need to be drilled out on the truck frame rails. Quality hardware was included with purchase.



- C14082
by:

Ordering and shipping was outstanding



- C14082
by:

Excellent product and easy assembly equals superior towing performance



- C14082
by:

Very happy with this hitch. No holes needed to be drilled! Shipping container was delivered separate from the hitch, as the box failed to contain the hitch during transport.



- C14082
by:

I purchased a used ambulance as a work vehicle for my company. Needed a hitch but not sure which one I would need because of the ambulance box. One phone call to etrailer with their friendly operator and a referral number to tech support and I had my answer. A couple of quick measurements and I had my hitch product number. Placed my order online on a Monday, hitch arrived on Wednesday. Drilled the required holes in my vehicle and I was in business. Fantastic service! Between friends an family we have ordered at least 6 hitches and accessories over the last several years.


Comments
What are the measurements and demensions of this hitch? I understand that all of the Chevy GMC 1/2 and 3/4 ton pickup frames are the same between 1967 and 1972. My truck is a 1969 C/10 long bed with the coil spring suspension. Will this hitch bolt up onto my frame without having to modify either the frame or hitch?
-- comment by: Lewis R - 02/22/2014

You will most likely still need to drill holes for the bolts to pass through the frame and the hitch. So long as your truck has 34 inch frame spacing and a standard bumper, you will not need to modify the hitch. Check out the instruction link on the product page, it will show you what is required to install the hitch. You can compare that with your frame and get a pretty good idea of how it will all go together.

-- Etrailer Expert Patrick B - 2/25/2014


- C14082
by:

The only thing that could have made it any easier is if my truck already had the holes drilled in it. As promised it fit my truck perfectly. And the only thing really visible is the receiver. Easy install. Thanks Etrailer!



- C14082
by:
1965 Chevrolet C/K Series Pickup

Showed up sooner than expected, real easy to install and works great. Website was easy to navigate and they found the exact fit for my 65 C20



- C14082
by:

I went on-line and have a very specific vehicle. I found what I think I needed & then called in. I got Jean P. & she was excellent. She got me exactly what I needed. Hitch Receiver, Wiring Harnesses for Lights & Brake controller, etc. She sent me an E-Mail with the specs on everything. She made it so easy, It was a No brainer. For Quality, and Pricing, e-Trailer can't be beat. I'd use them again anytime. Probably on e of the best Purchasing experiences I've ever had. No guesswork, No Games, It was a pleasure. Keep up the great Job!!! And, Thank you. Sincerely, Bill T. Sellersville, PA



- C14082
by:

I always been happy going through this website



- C14082
by:
1964 Chevrolet C/K Series Pickup

Have not used the trailer hitch, only installed as it was one of the early steps in the frame off restoration of my 1964 Chevy truck. It was a bit more work than the videos suggest. After ordering a second hitch that was to fit my truck, I still had to do substantial drilling. Not one hole really lined up. But it sure looks secure and substancial now! Look forward to having a bit more confidence in my hitch while towing.



- C14082
by:
1987 Chevrolet C/K Series Pickup

Requires a bit of work to fit my 87 Chevy V20. Had to grind out two big rivets and drill four 1/2" holes in the frame. The hitch itself is very stout. Good build quality but I do wish the chain stays were a bit more beefy. At $220+ its pretty pricy and doesn't include any wiring or a ball. A great hitch and after a bit of fitting its a real clean install.



- C14082
by:

Nice fit and finish. Pulling the old bumper/hitch was a chore.



- C14082
by:
1991 Chevrolet C/K Series Pickup

Fits as expected, shopping was fast and easy. Only recommendation I have is to leave the etrailer sticker with the packing slip instead of putting it on the hitch.



- C14082
by:

Very nice product, did not fit my application due to a fuel tank relocation in my 66 GMC. Would have fit perfect if not for tank move.



- C14082
by:
1971 Chevrolet C/K Series Pickup

looks good nice finish



- C14082
by:
Chevrolet

The trailer hitch fit my 1972 Chevy C-10 truck perfectly. No modifications were needed to truck or hitch.



- C14082
by:
1984 GMC C/K Series Pickup

Good solid product at a great price. Thanks etrailer


Comments
It has been flawless. Thanks for asking
Paul - 01/04/2019



- C14082
by:
1980 Chevrolet C/K Series Pickup

Great hitch metal thicker than any i have been looking at all year. Wow I got it in two days put on my bus day three looks good easy to follow instructions. We are ready for lake camping sooner than expected thanks. Will keep your site for future orders.


28
61
Show More Reviews

Ask the Experts about this Curt Trailer Hitch

  • Class V Hitch for 2003 GMC Savanah Cutaway
    Buyers Products Class V hitch # 3371801102 fits the cutaway cab and chassis version of the 2003 GMC Savana Van. For the cargo and passenger van version their Class V hitch # 3371801100 is the correct fit. I am not sure which version of the base vehicle you have (nor could Buyer's Products confirm based on it having been made as a school bus) so what you can do to determine which hitch will fit is simply look at the frame under the van. If you refer to the photos of the two hitches...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch Recommendation for 2019 Chevy Express 4500 Cutaway Chassis
    For your 2019 Chevy 4500 Cutaway Chassis we have the Buyers Products part # 3371801102 as a confirmed fit. This is only option we have currently but it has great towing capacities at 12,000 lbs trailer weight and 1,200 lbs tongue weight.
    view full answer...
  • 1966 Chevy C10 Short Bed Truck Trailer Hitch Fit
    The available frame area for a hitch to install on a 1966 Chevy C10 is different between the short and long bed trucks which is why the hitches don't fit both. So you'd need the Curt # C14082 which is a confirmed fit for the short bed truck like you have which has high towing capacities as well at 10,000 lbs.
    view full answer...
  • Will the Curt Hitch Part # C14082 Work with the Spare Tire on a 1986 Chevrolet C/K Series Pickup
    I spoke to my contact at Curt about the Curt Trailer Hitch Receiver part # C14082 for your 1986 Chevrolet C/K Series Pickup and they informed me that as long as the spare tire is of the stock tire size then it will work with the hitch installed. If you are looking to tow a trailer you will also need a wiring harness and ball mount/hitch ball if you do not already have them. For a wiring harness that will give you a 4-way trailer connector at the rear of your truck, I recommend using...
    view full answer...
    Image 1 for
  • How Wide is Hitch Mounting Bracket of Curt Hitch part # C14082
    The side brackets of the Curt hitch part # C14082 are 9-3/4 inches long so you'd have the clearance needed to fit this on your frame since you have 10 available inches.
    view full answer...
    Image 1 for
  • Bolt Hole Spacing of Curt Class IV Hitch Receiver 14082
    From side to side, the mounting holes measure 31-1/4 inches apart, center to center. All three sets of holes are the same distance apart. From rear to front, beginning at the rear of the vehicle the distance from the first set of holes to the second is 3-1/4 inches. From the second set to the third set is 2-3/4 inches. I've provided a diagram showing these measurements.
    view full answer...
    Image 1 for
  • Recommended Hitch Receiver for a 1971 Chevrolet C/K Series Pick Up
    I do have a hitch receiver option for your 1971 Chevrolet C/K Series Pick Up however, none of which will protrude through the rear license plate. For a rear hitch receiver confirmed to fit your vehicle, I recommend using the Curt Trailer Hitch Receiver part # C14082 as this hitch receiver will provide you with a clean look and Class IV towing capacities up to 10,000 lbs if your vehicle is rated that high. If you are looking to tow a trailer, I also recommend the 4-Pole Hardwire Kit with...
    view full answer...
  • Trailer Hitch for a 1979 Chevy C-10 with Trailering Special Package
    Actually several of your pictures did make it through! What you have there is the standard/step bumper on your 1979 Chevy C-10. Deep drop bumpers, also called cowboy bumpers, drop way down. If your truck has an 8 foot bed you can use Curt trailer hitch # C14082. If you have a 6 foot bed you would need hitch # 75034 and 6 of spacer block # 01077-011 to complete the installation. If you go with the Curt hitch then I also recommend etrailer ball mount kit # EBMK2416. It comes with a...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch for 1985 Chevy C20 That Works With Rear Spare Tire
    The Curt Trailer Hitch Receiver part # C14082 is what I recommend for a 1985 Chevrolet C20 as it will allow you to retain your spare tire. This hitch also has a hidden cross tube design with durable powder coat. In regards to a rear bumper, we don't have any options for step-side models unfortunately.
    view full answer...
  • Trailer Hitch Receiver and Brake Controller Recommendations for 1977 Ford F-150 4X4
    We can help you with both a hitch receiver and brake controller for your 1977 F-150. Your truck can be fitted with several classes of 2-inch hitch and these different hitch classes have varying weight capacities, ranging from a 5000-lb-rated Class III hitch to a 16000-lb-rated Class V. You can see all hitches on the link provided. You will need to use the Select Vehicle Style drop-down menu at the top of the page to will select your truck's type of bumper and that will allow you to see...
    view full answer...
  • Will Curt Class IV Trailer Hitch Receiver Fit 1974 Ford F-250 with Standard Bumper and 34 Inch Frame
    The Curt # C14082 will fit on your 1974 Ford F-250 as long as you have the crew cab. It does bolt on but will require drilling into the frame to install. I've attached a link that shows all of the Class IV hitch receivers confirmed to fit the different models of your F-250. If you also need a wiring harness use the Hopkins # 40105 for a 4-way connector or the Draw-Tite # 20023 for a 7-way. You might like an adjustable ball mount. The B&W Tow & Stow # BWTS10048B provides up to...
    view full answer...
  • Will Curt Trailer Hitch Fit with Flat Bed on 1984 Chevy K20
    The top of the receiver for the Curt Trailer Hitch # C14082 is going to sit roughly 4" lower than the frame on your 1984 Chevy K20. I'm not sure what the dimensions of your flat bed are, but if the part of your flat bed that you're talking about is more than 4" lower than the frame on your pickup then it definitely won't fit. If it's less than 4" then you should be good to go!
    view full answer...
  • Trailer Hitch Recommendation for 1980 Chevy C10 Stepside
    Does your trailer have the deep stepside that uses a different bumper from the standard bumper or does your truck have same bumper as standard? We currently don't have any fits for the step bumper variations is why I ask.
    view full answer...
  • Distance from Mounting Bracket to Top of Receiver on Curt Trailer Hitch # C14082
    The measurement from the top of the mounting bracket down to the top of the receiver tube measures 5 inches. Curt trailer hitch # C14082 is a custom fit hitch designed to fit the following vehicles: 1973 - 2000 Chevrolet C/K Series Pickup Cab and Chassis 1973 - 2000 GMC C/K Series Pickup Cab and Chassis 1973 - 1983 Ford F-100, F-150, F-250, F-350 Cab and Chassis 1984 - 1991 Ford F-150, F-250, F-350 Cab and Chassis 1992 - 1996 Ford F-250 and F-350 Cab and Chassis If you have a...
    view full answer...
  • Side Plate and Bolt Hole Spacing Measurements for Curt Trailer Hitch # C14082
    I went out to the warehouse to take some measurements of Curt trailer hitch # C14082. I made a picture showing the measurements for you. The bolt holes, starting from the one furthest forward on the vehicle, measures 2-3/4 inches to the center of the next hole. The center of the second hole to the center of the round clearance hole is 2 inches. And from the center of that round clearance hole to the center of the last hole is 1-5/16 inches. The crosstube is 2-1/2 inches square. The...
    view full answer...
    Image 1 for
  • Is There a Hitch Available for a 1986 Chevy CUCV M1008 Military Truck on a Chevy C/K Platform
    We don't have any hitches that are confirmed to fit on the CUCV M1008 military truck, but from what I was able to find out is that it's a version of the Chevy C/K series trucks that were manufactured for civilian use. You may be able to use the Curt # C14082 hitch, which is a Class IV hitch designed to fit on the cab and chassis models of this truck. You'll want to measure the distance between the two side frame rails where the hitch would mount to see if this would be a fit. According...
    view full answer...
    Image 1 for
  • Recommendation for Class 5 Hitch to Fit 1995 Ford F350 with 34 Inch Frame and Flat Dump Bed
    Based on the size of your frame, it sounds as though your 1995 Ford F350 is the Cab and Chassis style. Curt offers a Class IV Receiver Hitch, # C14082, that with bolt directly to your vehicle's frame with no welding required. This hitch has a 1000 pound tongue weight capacity and 10000 pound towing capacity. We do not offer a custom Class V hitch for your truck but universal Class V hitch receivers are available. Curt offers the Universal Weld-On Receiver, # 15901, with 3 inch drop and...
    view full answer...
  • Trailer Hitches and Wiring for a 1993 Chevy 1500 Truck and 1999 Chevy Suburban
    You would not be able to move a trailer hitch back and forth between the 1999 Suburban and 1993 Chevy 1500 because the hitches are different between these vehicles and are not interchangeable. Also, you would have to get new hardware every time. The hardware is meant to only be torqued down once and not reused. For the 1999 Chevy Suburban the most popular hitch is # C14029. For the truck the most popular option (for models with standard or step bumper) is # C14081. The recommended...
    view full answer...
  • Availability of Class IV or Class V Hitch Receivers for 1996 Ford F-250/350 With Bucket Truck Frame
    We do have a Class IV trailer hitch receiver from Curt, part # C14082, that is confirmed to fit a 1996 Ford F-250/350 Cab and Chassis style frame. As long as your Ford has 34 inch frame spacing this hitch receiver will fit. It has bolt hole centers that measure 31-1/4 inches that you can use as a reference. Since I am not entirely sure what the details of your specific frame look like, if it looks more like a standard truck then you might be needing one that fits pickups with a standard...
    view full answer...
  • Availability of a Trailer Hitch to Fit a 1974 Ford F-250 4x4 Crew Cab
    For your 1974 Ford F-250 Crew Cab, the Curt Trailer Hitch, # C14082, is designed to fit the Crew Cab model pickup. This hitch will fit a frame that measures 34 inches wide outside to outside. This Hitch is a Class IV hitch with 10,000 lbs gross trailer weight and 1,000 lbs tongue weight rating.
    view full answer...
  • Curt Trailer Hitch Recommendation for 1980 Short Bed Chevy Truck with Standard Bumper
    For your 1980 Chevy truck with a short bed and a standard bumper the Curt hitch part # C14082 is a confirmed fit and would work well. Curt has confirmed the fit for us.
    view full answer...
    Image 1 for
  • Trailer Hitch Receiver Fit on 1998 Chevy 3500 Cab & Chassis
    A stake body should be referring to a cab and chassis, and we do have a trailer hitch receiver that fits a 1998 Chevy 3500 cab and chassis. You just need to make sure that your frame measures 34 inches outside to outside, and if it does then the correct hitch is the Curt Trailer Hitch Receiver # C14082. If your '98 Chevy has a frame which is not 34 inches wide, you can still add a hitch, but it would need to be a universal weld-on application. The correct one would depend on the exact...
    view full answer...
  • Will Spare Tire Stay on After Installation of Curt Trailer Hitch on 1969 Chevy C/K Truck
    The answer really depends on how your spare tire is mounted. Since the Curt Trailer Hitch Receiver # C14082 is designed to fit on frame rails with 34" spacing, if the spare on your 1969 Chevy C/K truck fits directly in between the frame rails without interference then you should be able to. There isn't any way to know for absolute certain due to the age of these trucks, which is why this hitch as well as the Curt # 13028 are inconclusive in regards to whether or not your spare tire can...
    view full answer...
  • Trailer Hitch Receiver and Vehicle Wiring Harness For Towing With a 1972 Chevrolet K10 Pickup Truck
    Yes, the Curt Trailer Hitch Receiver # C14082 will fit your 1972 Chevrolet K10 Pickup with either a 6' or 8' bed that has a standard step bumper. You can verify that it will fit by measuring the distance of your drivers to passenger side frame rails. It should be 34" from outside of the driver side frame rail to outside of the passenger side frame rail. The Curt Vehicle Wiring Harness # C58044 and Universal Installation Kit # ETBC7 will give you the wiring needed to install a functioning...
    view full answer...
  • Does the Curt #14082 Require Modification to Work with Under Bed Mounted Spare Tire?
    Yes. I've linked a picture of a Chevy C Series with the under-mounted spare tire to show you, but the Curt # C14082 will work with the stock spare tire mounting location on your 1971 C Series pickup and you won't need to make any modifications as long as your truck has 34" frame spacing. If your 1971 C10 has a frame with different width, please let me know and I can recommend a universal hitch that will work for your truck.
    view full answer...
    Image 1 for
  • Hidden Trailer Hitch for 1994 Chevy C/K that Fits Behind Roll Pan Bumper
    We have hitches designed to fit behind a roll pan bumper installed on your 1994 Chevy C/K but the capacity is about half what you mentioned. For that we have the Curt # 13942 which has a towing capacity of 5,000 lbs trailer weight.
    view full answer...
  • Recommended Trailer Hitch Receiver for 1993 Ford F-350 Cab and Chassis
    For your 1993 Ford F-350 cab and chassis, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # C14082 which is rated for 10,000 lbs and tongue weight of 1,000 lbs and goes to 12,000 lbs and 1,200 lbs tongue weight when paired with a weight distribution system. This is a larger capacity than some Class V hitches, and most likely will meet your needs. We don't currently have a manufacturer that makes a Class V hitch for your vehicle. With this hitch, I recommend...
    view full answer...
  • What Grade of Hardware Comes with 10k Hitch for 1977 Ford F-250 C14082
    For a hitch that has a 10k capacity that fits your 1977 Ford F-250 you would want the Curt hitch part # C14082. The hardware that comes with this is Grade 5.
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.