Which Trailer Hitch Receiver Will Work On My 1972 Chevy GMC K10 With Leaf Springs & Standard Bumper?
Updated 10/15/2026 | Published 10/10/2026
Products Featured in This Question
Question:
I have a 1972 Chevy k10 pickup. I am looking for a trailer hitch for it. Most every one I find says it will not work with leaf springs. Do they make one for with leaf springs. it is 4 wheel drive. It is a step side with a factory chrome bumper. Not a step bumper. Thank you for your help.
asked by: Thomas F
Expert Reply:
Hey Thomas,
You can use the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # C14082. This fits the 1972 Chevy / GMC K10 pickup truck with the standard rear bumper (not drop bumper). The factory leaf springs won't interfere with installation! You'll just want to verify that your frame measures 34" wide from outside to outside.
If you also need trailer light harness, you can go with the universal 4 way flat from Curt # C58044, and then if you need 7 way for electric brakes on a trailer, you'd want to convert it to a 7 way with # ETBC7 and use a brake controller too # RED52VR.
Let me know if you need anything else! What are you planning to tow with it, Thomas?
(click to enlarge)
Dan M.
10/13/2026
I use one on my 78 k10. Worked fine after I patched up old hole. lol mine had the stock step bumper . More for looks for me but it works fine.
Andrew N.
10/13/2026
Marvin A.
10/15/2026
I’m in the process of restoring my 1972 K10 and this one fits perfectly. Much stronger than the previous one I had.
Andrew N.
10/15/2026
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- For Towing
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Side Plate and Bolt Hole Spacing Measurements for Curt Trailer Hitch # C14082
- Q&A: Bolt Hole Spacing of Curt Class IV Hitch Receiver 14082
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Will The Draw-Tite Universal Spare Tire Carrier Work With My 8 Lug Wheels?
- Q&A: Is Drilling Required for a Custom Mount Hitch on a 1985 Chevrolet C/K Series Pickup
- Q&A: Does Curt Hitch # C14081 Fit 1991 Chevy C/K Truck with Frame Width of 37 Inches Outside to Outside
- Q&A: Curt Trailer Hitch Receiver Part # 13028 Dimensions
- Q&A: Trailer Hitches and Wiring for a 1993 Chevy 1500 Truck and 1999 Chevy Suburban
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Which RV Propane Tank Size Do I Need?
Bill K.
10/13/2026
Thomas, Andrew’s advice is solid.