See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

• Looking For Replacement Brakes, Hubs, And Leaf Springs For My Dexter Axles
  Hey Steve, Thank you for that information you provided, it sets me up to get you the direct replacements. For that replacement brake assembly you will want to go with the Dexter Nev-R-Adjust Brakes # 23-458-459. This is the left and right hand assemblies that came originally on the trailer, ready to slide on and bolt on for you. We have the hub and drum assemblies as well that are pre greased with the bearings, races and seals already in them ready to slide on. For that you want to...
  view full answer...
• Replacement Bearing For Timken 15123 Trailer Hub Bearing
  We do offer the Replacement Trailer Hub Bearing, part # 15123 for your trailer but I was unable to find a cross-reference for the Timken 09067 bearing you stated you need. You can measure the inner diameter and see if there are any bearings from the attached pages that would work as a replacement for you. We also offer the matching race for the 15123 and that is part # 15245.
  view full answer...
• Bearing And Seal Kit Needed For A Dexter D60 Axle
  Hey Brian, For inner bearing # 15123 you would need race # 15245 and for outer bearing # 25580 you would need race # 25520. The grease seal can be purchased with part # GS-2250DL. The Timken Bearing Kit # TMK42VR would include 15123/25580 Bearings, 15245/25520 Races, and 412920 Seal (2.25" ID/3.376" OD).
  view full answer...
• Which Bearing And Seal Kit Is Needed For 2022 Cougar 368MBI Travel Trailer With Dexter 6K Axles?
  Hey there Mark! That's a great idea to stock up on some spare parts. Most people don't have the foresight like that. You will need either Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal # BK3-110 or Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal # BK3-100 depending on if you have the 2.125" or 2.250" inner diameter seal. You likely have the 2.250" I.D. seal but you'd need to check the part number or measure the seal to verify, unfortunately. The only difference in the kits is the grease...
  view full answer...
• What Is The Difference Between Dexter Hub/Drum 8-201-5UC3-EZ And 8-201-9UC3-EZ
  Hi Jim! The Dexter Trailer Hub and Drum Assembly # 8-201-5UC3-EZ and # 8-201-9UC3-EZ are very similar, but there are a couple differences. You noted the weight capacity differences, and that is due to the bearing combination, which I have listed below: # 8-201-5UC3-EZ Inner bearing # 25580 (1.75" inner diameter) Outer bearing # LM67048 (1.25" inner diameter) Inner race # 25520 Outer race # LM67010 # 8-201-9UC3-EZ Inner bearing # 25580 (1.75" inner diameter) Outer bearing # 15123 (1.25"...
  view full answer...
• Replacement Trailer Brake Assemblies For a 2011 Forest River Sierra 5TH Wheel Camper
  I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 for your 2011 Forest River Sierra 300RL. These will only require you to adjust the brakes to ensure they are set correctly when you install them. After that they will self adjust themselves as the brake material wears away. This will ensure your brakes last longer and will keep you out from under the trailer adjusting the brakes. The Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K will provide you with a new hub/drum...
  view full answer...
• Replacement Bearings, Races, and Seals for Trailer
  The Replacement Trailer Hub Bearing # 15123 and .750 inch outer bearing # LM11949, will use races # LM11910 and # 15245. For seals, that inner bearing often is used with the Grease Seals 10-36 (pair) # RG06-070 which have an inner diameter 2.250 inches of and outer diameter of 3.376. I recommend using a caliper like # PTW80157 to get a precise measurement to confirm fit.
  view full answer...
• Replacement Bearings, Races & Seal For Timbren 3,500LB Axle-Less Suspension and 6,000LB Trailer Hubs
  Thank you for the pictures. Your Timbren 3500 Axle-Less system has the upgraded heavy duty spindle. This will use the Bearing Kit # BK3-100. This will include the following components if you do not want the entire kit. Inner Bearing # 25580 Inner Race # 25520 Outer Bearing # 15123 Outer Race # 15245 Grease Seal # GS-2250DL Cotter Pin # 165649
  view full answer...
  
• Replacement Bearings for Mobile Home Hub with 1-1/4 Outer and 1-3/8 Inner Bearings
  It sounds like you're trying to replace hubs on a mobile home axle. Mobile home axles are designed for one time use, to transport the mobile home from point A to point B and then intended to be discarded after that. Because of this, replacement parts are rarely available for most mobile home axles and although we don't have a hub that matches the bearing sizes you mentioned, we have replacement bearings that may work to service your existing hub. For a bearing with a 1.375 inch inner...
  view full answer...
• What is the Difference Between 1.25 Inch Trailer Bearings
  The short answer is Yes, bearing # 15123 is slightly larger and stronger than # LM67048 and they use different races which means they are not interchangeable. Bearing 15123 uses race # 15245 which has an outer diameter of 2.441 inches and bearing LM67048 uses race # LM67010 which has an outer diameter of 2.328 inches. The size and strength differences are due to the fact that bearing # 15123 is used in a higher weight capacity hub. Bearing # 15123 is the outer bearing for a hub for a...
  view full answer...
• Replacement Bearings for an AL KO 5,200 lb Axle
  The AL-KO 5,200 lb axle uses the inner bearing # 25580 and outer bearing part # 15123 and grease seal # RG06-090. For races you would want # 25520 and # 15245.
  view full answer...
• Recommendation For Hub Upgrade For Mobile Home Axle
  Mobile home axles, hubs, and parts are designed for more of a one time use. Most of the time, replacement parts and options are not available. However, since you found the bearing numbers (Inner Bearing Item # 25580 and Outer Bearing Item # 15245) then Trailer Hub and Drum Assembly, Item # AKHD-655-6-EZ-K, might work. Before going forward with this option, there a few things to consider regarding right fit of Item # AKHD-655-6-EZ-K. First, This assembly is specially designed for E-Z...
  view full answer...
• Hub and Drum Assembly with Inner Bearing 1.75 ID and Outer Bearing 1.25 ID
  Thank you for providing the inner diameter of the two bearings; that is especially helpful when trying to determine which replacement parts are going to work. Even though we can confirm the bearings are a fit, you'll also want to make sure that the grease seals on any hub/drum assembly, as well as the races are a match for your. I'll also take this opportunity that while mobile home axles are cheap and readily available, they're really only designed to be used the one time and then discarded;...
  view full answer...
• Bearings and Grease Seals Needed for Kodiak Stainless Steel 6-on-5-1/2 Trailer Hub KH42655S
  Kodiak Stainless Steel 6-on-5-1/2 Trailer Hub # KH42655S does not include but uses inner bearing # 25580 and outer bearing # 15123. Races # 25520 and # 15245 ARE included with the hub.
  view full answer...
• Bearing and Seal Size for Rockwell 5200 Torsion Boat Trailer Axle
  The bearing size on your 5200 lbs Rockwell torsion axle trailer is 1.75" I.D. pn 25580 for the inner bearing and 1.250" I.D. pn 15123 . The Inner race is 3.265” O.D. pn 25520 and the outer race is 2.441” O.D. pn 15245 . The 2.25" I.D. double lipped grease seal is item # GS-2250DLGS-2250DL. The kit for your 5200 lbs Rockwell trailer is Bearing Kit, LM67048/25580 Bearings, 10-36 Seal item # BK3-300.
  view full answer...
• Bearings and Races for Trailer with Al KO Axle 4,400 lb Axle
  An Al KO 4,400 lb trailer axle uses the bearings # 15123 and # 25580 and races # 25520 and # 15245.
  view full answer...
• Replacement Trailer Hub/Drum & Self Adjusting Brakes 2016 Sure Trac trailer w/Lippert 5,200LB Axle
  You are able to switch to the Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K from the stock hub your 2016 Sure Trac trailer will have come with. This will switch you from the Outer Bearing # LM67048 and Race # LM67010 your Lippert axle came with to the Outer Bearing # 15123 and Race # 15245. I do recommend upgrading your brakes to the Self-Adjusting # AKEBRK-7-SA over the standard 12" electric brakes you have. These will not require adjustment every 3,000 miles or once you...
  view full answer...
• How to Measure Grease Seal's Inner Diameter
  The Replacement Inner Trailer Hub Bearing for 15123 is item # 15123. It has a inner diameterof 1.250. The matching race is # 15245. Since your other bearing measures 1.750" it is a match with, Replacement Trailer Hub Bearing - 25580 Item # 25580. The matching race is # 25520. The above bearings and races are included in bearing kits # BK3-100 and # BK3-110. You will need to measure on your spindle where the seal sits for its inner diameter location, that is marked "B" on the attached...
  view full answer...
  
• Determining Which Replacement Brakes and Hubs Fit 1966 Frolic Camper
  Thanks for all of the pictures and measurements! Based on the pictures of the braking assembly you have 10" diameter brakes with the the 4 bolt mounting pattern that is 2-7/8" apart. For compatible brakes we have the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469. Now when it comes the hubs we unfortunately do not have one that uses inner bearing # 15123 and outer bearing # 09067 so your best course of action will be replacing...
  view full answer...
  
• Bearing and Grease Seal Sizes Needed For etrailer Trailer Axle # e23GR
  The etrailer Trailer Axle Beam # e23GR will use the common bearing sizes for a 6,000lb axle with #42 Spindle. Inner Bearing # 25580 Inner Race # 25520 Outer Bearing # 15123 Outer Race # 15245 Grease Seal # GS-2250DL Grease Cap # DC250L-DCRP This axle would pair well with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 and the etrailer Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K which come preloaded with the parts I listed above installed and bearings pre-greased...
  view full answer...
• Will the Bearing Kit for Disc Brakes # DBRKHW6 Fit a Hayes T52 5,200 lb Axle
  To determine whether or not the Bearing Kit for Disc Brakes # DBRKHW6 will fit your Hayes T52 5,200 lb axle you will first need to pull a hub and locate the inner and outer bearing numbers as well as the number for your grease seal. The kit includes inner bearings # 25580 and outer bearings # 15123 with their races, grease seals # GS-2250DL, as well as drive-in grease caps # F001520 (with a 2.446" outer diameter), and 10 of our 1/2" trailer wheel lug nuts # CE11051. If you cannot find...
  view full answer...
  
• Availability of Bearing Race to Match Bearing Number LM67048
  The matching race for the bearing part # LM67048 that you referenced is the part # LM67010. This has an outer diameter of 2.328 inches. The race we have that has an outer diameter of 2.441 inch is the part # 15245 which is designed for the bearing # 15123. The # 15123 happens to have an inner diameter of 1.25 inch like the # LM67048 that you mentioned as well.
  view full answer...
• Replacement Bearings, Races, Seals & Grease For Dexter 6,000LB Axles 2022 Montana High Country
  The Dexter Multi-Purpose Lithium Grease # DX64TR is the exact grease that Dexter installed on your 6,000lb axles. For the hubs they are going to use the Bearing Kit # BK3-100 for each hub. This kit includes the Inner Bearing # 25580, Inner Race # 25520, Outer Bearing # 15123, Outer Race # 15245 and Grease Seal # GS-2250DL if you prefer to get only individual parts rather than the entire kit.
  view full answer...
• Which Bearing Kit Will Fit The Dexter 6,000LB Axle # 7461121-EB?
  You are correct the Bearing Kit # BK3-110 does contain the correct bearings, races and grease seal for the Dexter Axle # 7461121-EB. But this does use the Spindle Nut Kit # RG05-100. You can order all the parts separately if you wish so you do not have extra parts you won't need. All of the components below will fit one hub. Inner Bearing # 25580 Inner Race # 25520 Outer Bearing # 15123 Outer Race # 15245 Grease Seal # GS-2125DL Washer # 5-23 Nut # 6-191 Retainer # 6-190
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?