Bearings and Races for Trailer with Al KO Axle 4,400 lb Axle

Question

Question:

I am looking for bearings and races for Al KO 4400 pound axle . Drum 101/4 , 6bolt .

asked by: Dave

0

Expert Reply:

An Al KO 4,400 lb trailer axle uses the bearings # 15123 and # 25580 and races # 25520 and # 15245.

expert reply by: Jameson C

0

Answer 1

The Al-KO T44 axle uses the bearings #L68149 inner bearing and #LM67048 outer bearing. For the seal you'd need the part #RG06-050 and you'd be set.

view full answer...

Answer 2

The ALKO 4,400 lb axles use the same bearing sizes as the standard 3,500 lb alxes. If you want USA made bearings, I recommend the Bearing Kit #TMK52VR. This kit comes with the Timken brand bearings which are all made here in the USA.

view full answer...

Answer 3

The AL-KO 5,200 lb axle uses the inner bearing #25580 and outer bearing part #15123 and grease seal #RG06-090. For races you would want #25520 and #15245.

view full answer...

Answer 4

For 4,400 AL KO trailer axles the correct replacement brake assemblies are part #K23-478-00 for the left hand side and part #K23-479-00 for the right hand side. It is much easier to just replace the assemblies instead of trying to individually…

view full answer...

Answer 5

I have a few options for you to help with identifying the bearings on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to…

view full answer...

Answer 6

I have a solution for you, but the AL-KO T-44 axle has been discontinued since Dexter bought them out and there are no longer parts available for them, so you would need to completely replace the axles in order to replace the brakes. To choose the…

view full answer...

Answer 7

The number of leaves on a leaf spring does not dictate strength or capacity, so as you said, a 3000lb rated leaf spring (6,000lb axle capacity) can have various numbers of leaves since it is up to how the manufacture designed it. I wouldn't look…

view full answer...

Answer 8

Yes the Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs #AKEBRK-7L-SA along with the right side #AKEBRK-7R-SA are the correct assemblies for your AL KO 5,200 lb axles.

view full answer...

Answer 9

I have a replacement axle option for you, but based on the information I was able to find on your AL-KO 4400lb Axle #402268 it uses an older style of braking assembly that was discontinued when AL-KO was bought out by Dexter. If the brakes on your…

view full answer...

Answer 10

Based on my research, your AL-KO T-52 Axle has #42 spindles that use hub assemblies with a #25580 inner bearing and #15123 outer bearing. You will just want to determine the bolt pattern you are needing as well as the axle capacity, as this can vary…

view full answer...

Answer 11

Your AL-KO T-52 axle has #42 spindles that use hub assemblies with a #25580 inner bearing and #15123 outer bearing. The grease seal most often associated with this bearing set is part #GS-2250DL for 1 seal or #RG06-070 for a pair.

view full answer...

Answer 12

Michael, so you are correct you do have 4,400 lb axles so you can use the Dexter Nev-R-Adjust Electric Trailer Brakes #K23-478-479 for replacements. These are self adjusting so you never need to manually adjust them, works with 14", 14…

view full answer...

Bearings and Races for Trailer with Al KO Axle 4,400 lb Axle

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching