Arrives before Christmas 
A heavy-duty license plate bracket for use with stud-mount license plate lights. With zinc-plated all-steel construction, this bracket is extremely durable.
Manufacturer Cross Reference
Bracket will work as an exact replacement for:
Uni Bond # LH1000Z
Wesbar # 3203
Peterson # B428-09
Bargman # 30-72-100
Zinc plated steel license plate bracket, designed for durability. For use with stud-mount license lights.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to show you Optronics Trailer License Plate Mount Bracket, part number LP15SB. First off, with our bracket this is an all-metal construction. In its typical application, this license bracket is designed to sit behind the bracket that holds your taillight in place. In this case, we're on the driver's side or left-hand side. Typically they will line up with the studs on the lights. You can mount this either way you'd like, but typically you want this underneath so it sticks underneath the light on the bottom for the license plate. Let's go ahead and install it. Pretty simply.
Let's go ahead and remove these two nuts. Most of the time it's going to be a 7/16. In certain situations, it won't fit like this, so you can flip it around and install it that way as well. Of course, we realize that not as much light will go onto your license plate, but it will still work just fine. Then you can go ahead and install your license plate; 1/4" hardware will work just fine for that.
This hardware does not come with it as well. Since it is recessed inaudible 00:01:14 back, let's go ahead and turn off the lights and try it out and see how the trailer light illuminates the license plate. Even though it's recessed, it's still doing its job. That will finish it for a Optronics Trailer License Plate Mount Bracket, part number LP15SB. .
Nice upgrade from original equipment
Standard bracket. Fits as advertised. Price was great!
Thanks for the prompt service and product is what I needed.
Much better than old the plastic Tag Mount bracket.
Made of heavy gauge material, zinc coating. Way better than the stock plastic OEM.
Can't beat the price, value, and quick convenient delivery!!!
Exactly what I wanted. What is more amazing was how quick the package arrived. Etrailer is a good retailer to deal with.
I've restored my 12 ft double axle trailer after it was damage in a fire. The trailer was restored and the finishing touches were supplies by e trailer. Fast and prompt delivery, Thx so mix.
Received within a couple days of placing order, good communication from etrailer.com, good design, great price, expect it to last much longer than plastic.
I am completely confident that I'm not being taken advantage of. This business is awesome. I haven't yet asked for help but I would bet they would have the answer your looking for. Love the videos and grateful that you made them for everyone. If any requests, make a video on how to replace a spindle... Thanks
I was glad to find a solid zinc license plate holder for my trailer. I was very satisfied with the order and the product.
the zinc plated trailer license plate bracket is a 100% improvement over the flimsy plastic one that came with the trailer .I needed to make some adjustments to fit the trailer light but everything else was what I wanted
Great replacement for the cheap OEM plate holders. Ended up working out better than I thought it would. Bolts directly where the plastic one did on a 5 x 8 Carry-On trailer. Painted it black to match the trailer. Looks like it came that way from factory.
The product I ordered is exactly as described, and meets my needs perfectly. The price is quite reasonable. I had looked for several months at local retail outlets to find a sturdy steel bracket but all I could find were the plastic variety. Plastic does not hold up well when exposed to constant rushing air (as in 65 mph on the Interstate). I am very happy to find a license plate bracket that will do the job without failure!
This is one of the best license plate brackets I have found for boat trailers. The metal helps keep lights grounded and is worlds above plastic in terms of strength.
I have been looking for this product for awhile to replace two flimsy plastic license plate brackets on trailers we own. In fact I recently lost a license plate due to a plastic one that broke on my utility trailer. I am amazed at the high quality and very low cost of this product. Placing the order on-line was super easy and I couldn't have asked for more reasonable shipping cost. It arrived much faster than I would have suspected. I would definitely do this again and appreciate your service. Etrailer is "top-notch" in my book!
I have never went wrong with etrailer. This product was no different. Product is well built and sturdy. Fast shipping and would deninatley recommend it if you're looking for a trailer tag bracket.
Received very promptly for a reasonable shipping fee.
Item was as shown and described and seems to be sturdy with a durable finish. Installs with the plate offset facing front or rear. Will see how it holds up but sure its %500 better than the plastic crap that came on the trailer.
Anyone that first buys a trailer knows that plastic license plate holder is flimsy.And sometimes you can lose your license plate.This is steel sturdy and well made
Are you kidding? This metal license plate mount is rock solid and under $2. The holes are set up perfectly to fit the mounting bolts on my driver side trailer light and the position of the license plate when mounted allows it to be lit by the clear lens on the bottom of the trailer light when the running lights are on. Also, the bracket allows the mounted license plate (and frame) to just clear the rail of the flat bed trailer itself. Yeah, it's a perfect fit. Thanks, trailer!!
Great company! Exactly what I needed! Thank You
I think you will find these photos show a unique installation of your metal trailer license plate holder.
My Yamaha golf cart is street legal which requires a license plate. You will see in close up photo that the holder is used up side down for a custom fit.
Couldn't be happier. The plastic holder was not stiff enough so your holder is perfect.
Great well made product just as advertised. No more lost license plates due to cheap plastic brackets. This metal bracket looks like it's going to last a a life time!
This part was perfect for my liscense plate for my trailer . Thanks
Old bracket was plastic and easily broke off. I Ordered a metal one from etrailer at a great price. I painted mine with some extra plasti dip I had laying around and riveted it where the old one was and it's better than new!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.