2004 Ford Escape Roof Rack by Yakima
Roof Rack Includes:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 4
Part Numbers: Y00425,Y53TR,Y00221
Retail:$689.00
Our Price: $550.00
You Save: $139.00
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2
part number: Y00425
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Specs:
- Quantity: 2 crossbars
- Crossbar weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 50" long x 2-3/4" wide x 1-1/8" tall
- T-slot dimensions: 7/8" wide x 7/16" tall
- T-slot top opening: 7/16"
- Underbar slot: Full length
- Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4
part number: Y53TR
Heavy-duty towers let you safely mount 2 Yakima crossbars to a vehicle with fixed mounting points, flush side rails, or a track system. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
Specs:
- Maximum tower load capacity: 165 lbs
- Limited lifetime warranty
The heavy-duty SkyLine towers allow you to mount 2 Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks. The towers adjust during installation to ensure your crossbars are level. The SkyLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's Landing Pad system .
Versatile BarBed
The SkyLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the SkyLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening.
Simple Installation with Landing Pads
The towers install with custom-fit Landing Pads . To mount a tower simply open the cover, set the tower on the Landing Pad, and close the cover.
Mounting posts on the bottom of the tower extend when the cover is closed to lock the tower in place on the Landing Pad.
Each tower's pitch can be adjusted up to 6 degrees forward or backward during installation. This lets you create a level mounting surface for your gear even on a curved roof. Simply loosen the bolt near the top of the tower assembly, adjust the position of your bar, and then re-tighten the bolt.
Same Key System Locks
SkyLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 4
part number: Y00221
Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.
Features:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with C-shaped factory rack tracks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Specs:
- Quantity: 4 pads
- Lifetime warranty
8000221 Landing Pad 1 for Yakima Control or Sky Line Towers
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 - Y00425
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 - Y53TR
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 - Y00221
Average Customer Rating: 4.9 out of 5 stars (1324 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers let you safely mount 2 Yakima crossbars to a vehicle with fixed mounting points, flush side rails, or a track system. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.by: See11/03/2022
with so many variables having someone that could sort through all them was very helpful Thanks etrailer
by: Alvin04/17/2024
Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts
by: Nelson06/26/2023
It was what it was advertised and fit perfectly on my 2023 Ford Maverick
by: Doug02/16/2022
First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.
Doug
2/18/2023
Ive had the rail system on my truck for about a year now and its been a tremendous help. It allows me to still use my bed and provides much needed extra storage space, mostly for all the dog items we carrycrates, gates, beds, food, etc. I like the fact the rail locks to the truck so I dont need to remove them at home or at our destination.
by: Rob04/19/2023
Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.
by: John11/16/2023
2015 Mazda 3
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
by: Vannack01/04/2020
I chose Yakima because I had one in the past and they were always reliable. Thule was my next choice but didn’t like the look of 53’ crossbars on my car. I really appreciated the easy to follow instruction that made installation a breeze. The kit came complete with everything I needed to install right out of the box. I purchased the 2 Hightower bike racks to go with the roof rack system and plan to safely secure both bikes for our trips. It was a bit heavier than I anticipated (combined with the bike carriers) which will hurt my MPG but having easy access to disassemble the bike carriers when not in use made it a no brained. Additionally, I love the look of the system on my car.
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
by: Layne 02/11/2024
2022 Ram 3500
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Bryan03/27/2024
Very nice and heavy duty. They don’t look too fragile on a lifted truck with oversized tires.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Eric 05/13/2024
Subaru Forester
Fit our Subaru Forester perfectly. Install was a breeze.
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
by: Oliver05/30/2021
Lightweight and actually quite quiet with no attachments on them. With my bike racks there is a fair amount of noise but it doesn't come from just these. Mine is on a 2011 BMW 335.
by: Frank P.03/06/2016
Fit good with the OE track on roof. I like the new covers they supplied with the mounts.
by: Angela04/08/2021
Very happy with our purchase. I love how easily you can remove the entire rack easily. Too bad the locking mechanism comes separately but we are still happy with what we received.
by: Alexander12/11/2017
Jeep Cherokee
Super solid rack and the only one that fits the Jeep Cherokee without rails well and looks good too. Easy to install and worth the price
by: Joshua09/05/2019
Amazing quality easy set up fast shipping buy the locks the 4 pack With this fast shipping super impressed
by: Stephen07/07/2020
2019 Hyundai Santa Fe
I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.
by: Thomas 09/22/2023
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
by: Michael01/22/2023
2019 Mercedes-Benz E-Class
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Jacob08/01/2021
Really well made, great fitment, a little complicated instructions, but perfect install when they’re followed closely.
25
529
Show More Reviews Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- Roof Rack Recommendation for 2018 Toyota Camry with Naked Roof and Class Moon Roof
- For your 2018 Toyota Camry with a naked roof and the glass roof we have the Yakima Roof Rack part numbers # Y00425, # Y28TR, and # Y06192 which is a fit for your roof configuration and as long as you don't open the roof with the rack installed you'd be fine.
Inno does not have a rack that fits your vehicle configuration.
view full answer... - Yakima Crossbars for 2020 Mazda CX-5
- I assume since you are asking about crossbars that your 2020 Mazda CX-5 has the factory roof rails which cross bars mount to, and the Yakima # Y00425 fit. You will need the # Y00425 Crossbars, the # Y64AR Towers, and # Y39AR Fit Kit.
These cross bars are adjustable and removable, however the silver finish will match your factory roof rail and you may decide it looks good enough to leave on all the time. The crossbar's aerodynamic shape creates less wind noise than traditional bars.
view full answer... - Roof Rack Recommendation for Raised Rails on a 2011 BMW 3 Series
- I have a way for you to use longer crossbars for a roof rack on your 2011 BMW 3 Series but since the Thule crossbars have a limiting slot on the underside we need to use a different brand roof rack system and for that I recommend Yakima as they're the only ones with a slot all the way through so you can literally fit any crossbar length.
I'm only seeing from all of our manufacturers that a 2011 BMW 3 Series has raised rails so for that Yakima recommends the following parts (if you have
view full answer... - Roof Rack Recommendation for 2017 Ford Edge with Panoramic Sunroof
- We have a variety of roof rack options that fit your 2017 Ford Edge with the glass roof but I really like the Yakima JetStream system because it's fine-tuned to fit your vehicle like a glove and keep the crossbars level with each other. The correct parts will depend on if you have the flush rails or a naked roof.
Flush Rails
50" JetStream Crossbars - # Y00425
SightLine Towers - # Y64AR
SightClip Fit Kit - # Y79AR
Naked Roof
60" JetStream Crossbars - # Y00426
BaseLine Towers -
view full answer... - Roof Rack Recommendation for 2021 Acura RDX with Flush Factory Rails
- While the search bar is a great way to look up different products, if you're wanting something designed to fit your 2021 Acura RDX with the factory raised rails it's best to use our fitguide system to sort through the vast amount of choices.
The Thule AeroBlade Edge Crossbar TH7602B is not a fit for your vehicle but since you have the factory flush rails I recommend using the Yakima JetStream roof rack which consists of the following:
50" JetStream Crossbars - # Y00425
SightLine
view full answer... - Leveling the Crossbars on a 2018 Acura MDX to Mount a Rooftop Tent
- I spoke with a contact at Thule, and they said that no roof rack is completely parallel with the ground. However, there are a few things you can do to ensure the tent is level. Most of these tricks are used by RVers for leveling their trailers.
First, park your car on terrain that will have your 2018 Acura MDX's front slightly lower to even things out.
Second, you can use a wheel leveler like part # TH307617. With your back tires on these, you'll achieve the level you're looking for.
view full answer... - Roof Rack Kit for a 2016 Ford Edge SEL
- There are roof racks available for 2016 Ford Edges without rails, and they can be installed at home without any special tools.
I recommend Yakima's JetStream bars, which come as a kit that consists of:
Yakima JetStream Crossbars, 50 Inches part # Y00425
Yakima BaseLine Towers, part # Y28TR
Yakima BaseClip #102, part # Y06102
Yakima BaseClip #139, part # Y06139
Make sure to order both BaseClip #102 and BaseClip #139 as they are two separate kits, one for the front and one for
view full answer... - Roof Rack for a 2020 Kia Soul X-Line with Flush Side Rails on Roof
- Yakima has a roof rack that fits the flush rails of your 2020 Kia Soul X-Line with the Jet Stream rack part numbers # Y00425, # Y00145, and # Y44FR that you referenced. This does not attach to the mounting points you mentioned but does clamp to the flush rails like you see in the picture I attached.
view full answer... - Is There a Compatible Fit for Thule 400xtr on 2016 Mazda 3?
- If Thule still made fit kits for your Rapid Aero Towers you would likely just need a fit kit, but they stopped making those towers and fit kits in 2009 as you stated so no vehicles newer than that have a compatible fit.
For your 2016 Mazda 3 if you have fixed mounting points the only roof rack we have available is from Yakima using the JetStream bars either part # Y00425. Then use parts # Y53TR and # Y00248 for the towers and landing pads.
view full answer... - Best Roof Rack Recommendation for a 2019 Toyota Highlander
- The Yakima JetStream Crossbars # Y00425 (black) will give you the peace and quiet and aerodynamic wind resistance you need. My research on your 2019 Toyota Highlander revealed that your vehicle has either flush factory rails or naked roofs.
On your naked roof, in addition to the bars, you will need:
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 (you will need to order two sets of these)
For mounting
view full answer... - Roof Rack Recommendation for a 2021 Honda CR-V
- A great roof rack setup for the naked roof on your 2021 Honda CR-V includes the following parts:
- Yakima JetStream Crossbars - Aluminum # Y00425
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06188
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06189
- (optional - for extra security) Yakima Same Key System (SKS) Lock Cores # Y07204
The reason why the Yakima setup is because the aerodynamic
view full answer... - Is there a Roof Rack for a 2023 Subaru Forester w/out Side Rails?
- Yes, there is! To add a roof rack to your 2023 Subaru Forester with no roof rails, I recommend the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points- Qty 4 item # Y53TR
Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 item # Y00248
view full answer... - Roof Rack for 2018 Honda CR-V With Bare Roof
- For your wife's 2018 Honda CR-V with a naked roof we have a great roof rack option, the Yakima Jetstream rack part numbers # Y00425, # Y28TR, # Y06188, and # Y06189.
view full answer... - Recommended Aero Crossbars for a 2023 Volkswagen ID 4 With Factory Rails
- It looks like to mount the Yakima JetStream Crossbars # Y00425 to your 2023 Volkswagen ID 4 you're going to need the RidgeLine Towers for Yakima Crossbars # Y00145 with the RidgeClip 35, but the RidgeClip is not available anymore.
Instead, I'd recommend going with the Thule WingBar Evo Crossbars # TH711300, with the Evo Flush Rail Feet for Thule Crossbars # TH710601, and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet # TH28ZE.
These crossbars are identical
view full answer... - 2012 Toyota Sienna Roof Rack Recommendation for Roof Top Tent
- For 2012 Toyota Sienna I recommend going with the Yakima JetStream roof rack setup. This mounts to the raised rails on your vehicle and it uses straps for the rails as opposed to the Landing Pad setup:
50" JetStream Crossbars - Black # Y00425
TimberLine Towers - # Y33TR
Lock Core Kit - # Y07204 (optional)
You can mount an aftermarket rail system to the roof of your Sienna but you'll have to remove the OEM raised rails to accomplish this. If you choose to do that then you can use
view full answer... - Using Longer Crossbars for Roof Rack on 2021 Toyota RAV4 with Flush Roof Rails
- Great questions. I have a solution for you to use longer bars, but the Thule WingBar Evo crossbars only have a limited amount of space for the T-Slot on the underside where they connect to the legs and there isn't enough space for you to go with longer bars. So instead I recommend going with the Yakima JetStream system as the T-Slot on the underside for this system runs the length of the crossbar so there is no limiting factor.
50" JetStream Crossbars - # Y00425 OR 60" - # Y00426
SkyLine
view full answer... - Does Hitch Install on 2019 Volkswagen Golf Alltrack Void Warranty
- A lot of people use trailer hitches to carry bike racks or cargo carriers which is why we offer trailer hitches for vehicles like your 2019 Volkswagen Golf Alltrack like the Draw Tite part # 24949.
When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. I recommend looking it up online.
view full answer... - Recommended Roof Rack for a 2024 Mazda CX-50 w/ Flush Rails
- To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR
This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima
view full answer... - Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
- You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following:
- Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length
- Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number)
- SkyLine Towers for Yakima Crossbars # Y53TR
- HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
view full answer... - Yakima 70 Inch JetStream Crossbar Roof Rack for 2020 Toyota Highlander With Flush Roof Rails
- You sure can. You'll need the 70 inch JetStream crossbars as part # Y00427 along with the # Y53TR SkyLine towers and the # Y66VR landing pad kit to make the transition between the fixed mounts in your flush rail and the SkyLine towers. You can also add lock cores with part # Y07204.
I've linked to a demonstration video showing a JetStream roof rack being installed on a 2019 Highlander.
It is important to note that a crossbar system should never extend past the mirrors of your vehicle.
view full answer... - Will Two Bikes and a Kayak Fit on a 2019 Subaru Forester Factory Roof Rack
- If you were to upgrade to an aftermarket roof rack then I believe you would be able to fit two bikes and a kayak on top of your 2019 Subaru Forester but not with the factory roof rack. In order to upgrade, I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y53TR, and part # Y00248 which actually replaces the factory roof rack.
The Yakima JayLow Kayak Carrier part # Y04073 along with two of the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 would then allow
view full answer... - Yakima Parts to Fit American Roll Cover Tonneau Cover on a 2020 Chevy Silverado 1500
- I'd be happy to help!
The Yakima SkyLine Towers # Y53TR are compatible directly with the JetStream crossbars so no adapter kit is needed, but if you're installing this over a truck bed you need the Yakima HD bars which do require an adapter. Unfortunately, crossbars and leg systems aren't compatible from one manufacturer to the other so you'll need to stick with Yakima crossbars for your application.
If you already have the fit kit (which I believe is 2 of the Landing Pad # Y00221)
view full answer... - Can I Use the 60-Inch Yakima JetStream Crossbars to Use My Hullavator on My 2021 Toyota Highlander?
- If you are looking at the JetStream crossbar system for your 2021 Toyota Highlander Hybrid with flush rails, you are correct that you need the SkyLine Towers # Y53TR, Landing Pad 28 # Y66VR, and Lock Cores # Y07204. These etrailer part numbers correspond to the Yakima part numbers you mentioned. However, the JetStream Crossbars 8459629 did not come up with a matching etrailer part number. However, if you are looking for 60-inch bars, those are # Y00426. While Yakima recommends 50-inch crossbars
view full answer... - Recommended Roof Rack and Ski/Snowboard Carrier for 2015 Mazda CX-5 with Naked Roof
- I highly recommend using the Yakima JetStream roof rack for your 2015 Mazda CX-5 because it has a 165 lb weight capacity, mounts directly to fixed points on your roof, and allows you to use a variety of other roof mount accessories. This consists of the SkyLine Towers # Y53TR, Landing Pad 11 # Y00233, and then your choice of JetStream Bars:
50" Black # Y00425
60" Black # Y00426
70" Black # Y00427
You can then use the Yakima FreshTrack # Y03093 and the Lock Core Set # Y07206 to
view full answer... - Aero Style Crossbar Roof Rack for 2021 Buick Enclave
- Thule hasn't yet released a fit for the 2021 Buick Enclave, but Yakima offers an awesome aero-style setup that uses their # Y53TR SkyLine towers, 50 inch JetStream crossbars in black as part # Y00425. You'll also need the # Y00245 Landing Pad which allows the roof rack towers to attach to the fixed points located in the flush mounted rails on the roof of your Enclave.
I've linked to a video showing a typical installation.
view full answer... - Can I Use My CoreBar Crossbars # Y00421 with Raised Rails on a 2017 Honda CR-V?
- While we do have a crossbar option for you, using the SkyLine Towers # Y53TR along with the Yakima CoreBar crossbars # Y00421 will not work on your raised rails on your 2017 Honda CR-V. This is because the CoreBars # Y00421 along with the # Y00148 and the fit kit # Y00245 only fit vehicles with factory flush rails on the vehicle.
With that being said, we cannot confirm what feet/fit kits can attach to your installed rails on your CR-V. Even if we could, Yakima does not make a compatible
view full answer... - Parts Needed to Add Roof Rack to 2004 Ford Escape With Factory Tracks
- We have all the parts you need to add a roof rack to your 2004 Ford Escape, and I think the best option is a round bar system from Yakima because of its value. It is both a quality rack and cost-effective so I strongly recommend it; the rack is made up of the following parts:
- Round 48" CrossBars for Yakima Roof Rack # Y00408
- Yakima SkyLine Towers # Y53TR
- RoundBar SL Adapter # Y03536
- Landing Pad 1 for Yakima Control Towers # Y00221
view full answer... - Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline Towers
- To use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
view full answer... - Parts Needed to Add a Yakima Roof rack to a 2012 Subaru Impreza Hatchback
- The 2012 Subaru Impreza hatchback with naked roof uses Q-clips Q83 for both front and back but that system has been discontinued by the manufacturer. If you can't find them used, then n you will need to upgrade but you can still use your round bars.
What you will need is the Skyline towers # Y53TR, Round Bar Adapter # Y03536, and Launch Pad 22 # Y00248. I also recommend using sks locks # Y07204.
view full answer... - What do I Need to Carry My Bikes and Gear on the Roof of My 2020 Blazer with a Bare Roof?
- To get your bikes and gear on your roof you need a roof rack. Yakima makes a cross bar mounting kit to mount to your flat roof # Y00425, # Y53TR, # Y00245.
Before loading your bikes and gear on your roof, you need to look in your owners manual for the roof capacity of your Blazer.
I recommend the Yakima Front Loader # Y02103 this is a lighter rack which enhances your ability to keep all of your gear on the roof. This is a great single bike rack because there is no contact with the
view full answer... - Yakima Jetstream Roof Rack for 2021 Subaru Outback
- The Yakima JetStream roof rack part numbers # Y00425, # Y53TR, and # Y46VR is an extremely nice roof rack for your 2021 Subaru Outback Wagon.
This is what I would go with because in terms of quality, ease of use/install, quietness, and durability it really is outstanding.
view full answer... - Parts Needed to Install Round Bar Yakima Roof Rack on 2019 Toyota Tacoma
- I can help you install the Yakima round bars you have on your 2019 Toyota Tacoma but Yakima actually no longer uses the Q Tower racks so the Q clips aren't available anymore and were never tested on your truck. So what you'd need is the # Y53TR for the towers, # Y03536 for the roundbar adapter, and Landing Pad 24 # Y74FR since you already have bars like the # Y00408.
view full answer... - How To Use Yakima Round Crossbars on 2018 Tesla Model S with Panoramic Roof
- I do have an option for you but for the 2018 Tesla Model S you must use the Yakima Skyline Tower part # Y53TR and Landing Pad 22 part # Y00248. Then, in order to use the Round 58" CrossBars for Yakima Roof Rack System part # Y00409 you'll need the Yakima Round Bar Adapters part # Y03536.
The Yakima Timberline Towers are not compatible.
view full answer... - Do Yakima Core Bars fit Thule Tracks on Leer Cap
- A Yakima rack with CoreBars is compatible with the Thule tracks on the Leer cap of your 2016 Toyota Tacoma.
To install the rack, you would need the following parts:
Two of the Landing Pad 1 for Yakima Control Towers # Y00221
SkyLine Towers for Yakima Crossbars # Y53TR
The Yakima CoreBars you need would depend on the width of your Leer cap; your options are Yakima CoreBar Crossbars 50" Long # Y00421
Yakima CoreBar Crossbars 60" Long # Y00422
Yakima CoreBar Crossbars 70" Long
view full answer... - How to Carry a 98-LB Kayak on a 2012 GMC Yukon XL Denali
- For a 2012 GMC Yukon XL Denali, Yakima makes a great roof rack system. I recommend the HD bars, part # Y01156. They are heavy-duty bars capable of handling your kayak. To mount them to your tracks, you will need the SkyLine Towers, part # Y53TR, along with the HD Bar SL Adapter, part # Y03541, and the Landing Pad 20, part # Y00246. The total system can handle 165 pounds, but check your owner's manual to ensure your roof can handle that much.
Since your kayak is so long, using the Malone
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
- Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer... - How to Fit the Whispbar WB-400 Kayak Carrier on a 2016 Subaru Outback Wagon
- We do have some solutions for you to use a J-Style carrier on your 2016 Subaru Outback Wagon, but if your current crossbars don't have a T-Slot then the (discontinued) Whispbar WB-400 J-Style kayak carrier isn't compatible with your current roof rack system.
To use this system with your Outback Wagon you need to upgrade your OEM crossbars to Yakima JetStream or HD crossbars which do use the T-Slots. For a complete roof rack system you need the SkyLine Towers # Y53TR and the Landing
view full answer... - Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500
- You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following:
- Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2)
- SkyLine Towers for Yakima Crossbars # Y53TR
Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then
view full answer... - How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
- There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
view full answer... - What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
- If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221.
For the tracks themselves, they come in 3 different sizes:
- Yakima 42" Tracks for Roof Racks # Y01126
- Yakima 54" Tracks for Roof Racks # Y26RR
- Yakima 60" Tracks for Roof Racks # Y01135
Since most
view full answer... - What Parts Are Needed To Make Low-Profile Bed Rack System For 2022 Ford F-150 w/ RetraxPro Cover
- Looks like you are pretty much there!
The Landing pad 1 # Y00221, Skyline Towers # Y53TR, and 68" Yakima HD crossbars # Y01158 will all work perfectly with the RetraxPro XR rails on your 2022 Ford F-150.
This would be perfect for carrying bike racks with a rack like # TH598004-FB, or a platform like the # Y05045-39 but it would be pretty hard to carry kayaks or canoes with this style of rack as you would have a ton of overhang past the bed which is less than ideal.
For a kayak
view full answer... - Parts Needed to Install Yakima Roof Rack in Channel on Truck Camper Shell
- The Yakima Landing Pad 1 part # Y00221 is the correct fit kit to allow you to install a Yakima roof rack in the channels of your camper shell.
You do have to remove the end caps of the tracks to be able to install the square nuts that slide into the channel and hold the rack in place. You'd need a quantity of 2 of these fit kits though for both bars.
You'll also need:
quantity 4 of the Control Towers # Y8890027
and depending on the length of your cap
quantity 2 Crossbars like:
view full answer... - Recommended Roof Rack And Canoe Carrier For 2009 Ford F-150 With ARE Camper With Yakima Roof Tracks
- We have just what you need to put a rack and canoe carrier on your 2009 F-150 with the ARE camper.
First you will need 2 pairs of the Landing Pad 1 for Yakima Control Towers, part # Y00221.
Then you need the SkyLine Towers for Yakima Crossbars, part # Y53TR.
For crossbars you can take a quick measurement to make sure you get the right length for your camper. For 60-inch I recommend part # Y00422. If you want 70-inch you will need part # Y00423.
I also recommend the Yakima
view full answer... - Recommendation for Installing Yakima Roof Rack on Leer Cap with Thule Tracks
- You can indeed install a Yakima roof rack system on your Leer cap that features the Thule tracks.
You will need to start with two of the Landing Pad 1 # Y00221, which are the pieces that will mount to the tracks to provide an attachment point for the towers. Then from there you will need 4 of the Control Towers # Y8890027. Then it is just a matter of selecting the crossbar length you are wanting. These are available in 48 inch # Y00408, 58 inch # Y00409, 66 inch # Y00410, and 78 inch
view full answer... - Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack Tracks
- Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2.
To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following:
48" Round Bars - # Y00408
58" Round
view full answer... - Yakima Roof Rack that Fits Leer Truck Topper Tracks
- We have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell.
To complete your roof rack setup you will need:
quantity 2 of the Landing Pad 1 # Y00221
quantity 4 of the Control Towers # Y8890027
and depending on the length of your cap
quantity 2 Crossbars like:
48 inch # Y00408
58 inch # Y00409
66 inch # Y00410
78 inch # Y00411
To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
view full answer... - Roof Rack For 2005 Buick Rendezvous That Can be Transferred
- The only roof rack that can be transferred from your 2005 Buick Rendezvous to a different vehicle is one that uses vacuum cups to attach, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B.
Otherwise, roof racks are specific to each vehicle, so if you wanted a custom fit rack, the only option for your '05 Rendezvous is the following from Yakima:
- Yakima JetStream Crossbars # Y00426
- SkyLine Towers # Y53TR
- Landing Pad 1 # Y00221
view full answer... - Dimension of Mounting Hole Spacing of Yakima Landing Pad 1 #Y00221
- I was able to go out to the warehouse and measure the Yakima Landing Pad 1 for you and found that the mounting hole spacing is 3-15/16 inches from center to center.
I have linked a picture and the part to this page for your convenience.
view full answer... - Roof Rack for Camper Shell and Roof of 2020 Chevy Silverado 1500
- You can then use the Yakima roof rack with landing pad 1 part # Y00221, two of the control towers # Y8890027, and the single crossbar # Y8810025.
Then for a single bar rack for the roof of your 2020 Chevy Silverado 1500 you'd want the part # RRVA150B, # RRRLKVAH, and # DK427H and you'd be set.
view full answer... - Is the Mounting Hardware for the Landing Pads for Yakima Control Towers Part # Y00221 Included
- The mounting hardware that is needed to install the Landing Pads for Yakima Control Towers part # Y00221 is included therefore no additional purchase will be necessary. I have attached a photo that shows everything that is included in the kit above for you as well.
view full answer... - Adding Crossbars to an ARE Camper Shell with Tracks
- I believe your ARE camper shell has Yakima tracks installed but it doesn't really matter which brand you have as most of them will accept each others mounting feet. However, Yakima has the most cost effective option for you so I recommend using the landing pads part # Y00221 (2), control tower part # Y8890027 (4), and crossbars part # Y8810025 (2). The round crossbars are cut to fit. This is the most inexpensive option we have for you to add crossbars to your ARE camper shell.
view full answer... - Landing Pads, Control Towers, and Round Crossbars for Yakima Roof Rack Tracks on a Pop Up Camper
- Yes, if you use the Landing Pad 1 # Y00221 you will need to use Control Towers, # Y00214 (discontinued). This is a set of 4 feet so you will need to get 2 sets of the Landing Pads.
Pop up campers, while generally small, can still be wide. The widest Yakima bars are 86 inches, # Y00420. If you need a different length there are also 78 inch bars, # Y00411, 66 inch bars # Y00410, 58 inch bars # Y00409, and 48 inch bars # Y00408.
view full answer... - Yakima Round Bar Complete Roof Rack System With Tracks
- You can piece together a round bar system that is going to be similar to a Yakima roof rack with round bars and a track system. What you will need are the following parts:
- Yakima 54" Tracks for Roof Racks # Y01127
- Yakima Control Tower # Y8890027 (Quantity of 4)
- Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2)
- Round 58" CrossBars for Yakima Roof Rack System # Y00409
OR Round 66" CrossBars for Yakima Roof Rack System # Y00410
This will give you a track-based
view full answer... - Recommended RetraxPro XR Tonneau Cover and Crossbar Kit for a 2022 Ford F-250 Super Duty
- I would be happy to help you find a cross bar system and tonneau cover for your 2022 Ford F-250 with the 6-3/4' bed. There is not a round bar system though but I have two great options for you that will work with a tonneau cover.
The correct RetraxPro XR tonneau you will need for your F-250 is Item # RTT-80383. This cover has the built-in T-slots that let you mount your ladder rack or roof rack crossbars to the side rails.
If you are set on a Yakima system you will want the Yakima
view full answer... - Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
- You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
view full answer... - Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks
- I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your ARE camper.
To complete your roof rack setup you will need:
quantity 2 of the Landing Pad 1 # Y00221
quantity 4 of the Control Towers # Y8890027
and depending on the width of your cap
quantity 2 Crossbars like:
48 inch # Y00408
58 inch # Y00409
66 inch # Y00410
78 inch # Y00411
view full answer... - Roof Rack for 2008 Fleetwood Niagara Pop Up Camper with Factory Track System
- I did some research on your 2008 Fleetwood Niagara Pop Up Camper and it appears that most of the major roof rack manufacturers (Thule/Yakima/Rhino-Rack) have systems that will work with the factory tracks you have on the roof of your popup camper. One of the most cost effective options we have for you is from Yakima in their round bar system. This system is composed of the fit kit part # Y00221(2), mounting feet part # Y8890027 (4), and crossbars part # Y8810027 (2). Please keep in mind
view full answer...
Yakima Accessories
Fit to this rack on your 2004 Ford Escape
Info for these parts were:
Video Edited:
Zack K
Video Edited:
Dustin K
Written by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Jeffrey L
Video by:
Joshua S
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Alex H
Updated by:
Michael B
Updated by:
Noah M
Installed by:
David F
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ralph C.
11/6/2023
Great had a few Hic-Ups getting the correct set E-Trailer reps were all over it and got me going Great Company to work with