Low-profile, fork-mount carrier lets you transport 1 bike on your roof rack crossbars. TorqueRight knob prevents over- or under-tightening. Rear-wheel cradle adjusts to hold bikes of different lengths. 9-mm, Quick-release skewer included.
Features:
Specs:
Installation Details 
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, on the 2017 Dodge Grand Caravan, we're gonna be test fitting the Yakima HighSpeed rooftop bike rack, part number Y02115. We already have a bike installed on the rack, let's take a closer look and show off some of the features.How the bike is attached to the rack, we're not gonna have any frame contact at all. Instead, we're gonna have this skewer mount up at the front, which should grip your bike by the forks. This skewer mount can be removed and replaced, so you can use it with through-axles as well.Coming to the back here, we have this wheel strap, which is adjustable along the length of the bike rack to accommodate bikes of different sizes.And with the bike and bike rack installed, we're not gonna have any issues of clearance between our rear hatch and the bike rack itself, as you can see here.At the rear portion of the bike rack, we do have an integrated cable lock, which you can replace this plastic piece here with a Yakima lock core system, and make it key to like with your roof rack as well as the front part of the bike rack here. There's an additional lock up at the front, to lock your skewer into place. And there's also a lock where it makes ...
Excuse me, where it makes connection with your rear cross bar, and that can secure it to your roof rack as well.Let's go ahead and take the bike off and set it aside. We'll start by pushing in the top tabs of our straps here. Then, holding on to the bike, we release our front skewer mount by lifting up that handle and lifting our back up and off.How this grips around your roof system, we're gonna have these rubber coated steel straps that wrap around to the top portion here, and are held in place by these snaps. You just snap into place, you push the lock into place, and you're good to go. And that's gonna be the same up at the front here.
Now, to remove our skewer, you just loosen up this knob up at the top. And then to put it back in place, you just tighten it down until you hear it click, and then you know it's tightened down.And there you have it for the Yakima HighSpeed roof top bike rack on our 2017 Dodge Grand Caravan.Here on our test course, we'll start by going through the slalom. This is going to show us the side to side action. This simulates turning corners or evasively maneuvering.Once we get to the full speed bumps, we'll see the up and down action. This will be just like driving in and out of a parking lot, parking garage or driveway.Once we get to the alternating speed bumps, we'll see the twisting action.
This will simulate hitting a curb, or a pothole, or driving over uneven pavement.
Do you have a question about this Roof Bike Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.