Hitch Covers

Hey Doug, we have the Curt hitch part #C33MJ that is a confirmed fit for your 2026 Mazda CX-50 hybrid. I really like this hitch because it's mostly hidden and also it has great towing capacities. Will be doing any towing?

Hi Brian! The Roadmaster Falcon 2 Tow Bar for Blue Ox Base Plates - RV Mount - 2" Hitch - 6,000 lbs #RM-525 will indeed fit the #BX2805 Blue Ox base plate on your 2017 Fiat 500. This actually has the adapters included already, so you will not…

Hey Steven, since the 215/75R17.5 tire size of the #TR62ZR is 30.2 inches the spare cover I would recommend would be the Classic Accessories part #052963753875 which is black like you are wanting, fits tight, won't blow off, and is correct size…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hello Clayton, We get this question a lot about hitches. There is always the possibility that a hitch can interfere with the hands-free lift gate, but you can typically move your foot to the right or left of the receiver to get it to still work.…

Hi Steve! We do have a Class IV hitch available for your 2021 Ford Ranger, but the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #DT35PR is specifically for a 2024 to 2027 (so far) Ranger. For your 2021, you will want…

Hello Jacob, thanks for reaching out. We do carry the EcoHitch #EH75SR but I am sorry to say we do not offer the receiver attachment by itself. You may want to try reaching out directly to EcoHitch to see if they can provide one. Otherwise the only…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Robert, the Access tonneau cover part #A24AU can work with a ladder rack but it has to be one that attaches to the top of the bed rails and not one that wraps around them like the Yakima Overhaul. For a ladder rack that installs like that the…

Good morning Brianna! On a good sunny day, a 100W panel like the Rich Solar #RS27VR can produce about 30–35 amp-hours of power over 5–6 hours of direct sun. That’s ~6 amps of charge per hour which is enough to recharge a partially depleted 100Ah…

Hello Mike, thanks for reaching out. We do offer a trailer hitch for the 2025 Toyota Grand Highlander Max Hybrid Platinum. For that I recommend the following: - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"…

Thanks for reaching out Mike! I spoke to Weigh Safe and only their Cerakote aluminum ball mounts are made in the USA. All other steel and aluminum ball mounts, including the steel 180 PRO models, are manufactured overseas. If you wanted an American…

Hey Doug, we have the Curt hitch part #C33MJ that is a confirmed fit for your 2026 Mazda CX-50 hybrid. I really like this hitch because it's mostly hidden and also it has great towing capacities. Will be doing any towing?

Hi Brian! The Roadmaster Falcon 2 Tow Bar for Blue Ox Base Plates - RV Mount - 2" Hitch - 6,000 lbs #RM-525 will indeed fit the #BX2805 Blue Ox base plate on your 2017 Fiat 500. This actually has the adapters included already, so you will not…

Hey Steven, since the 215/75R17.5 tire size of the #TR62ZR is 30.2 inches the spare cover I would recommend would be the Classic Accessories part #052963753875 which is black like you are wanting, fits tight, won't blow off, and is correct size…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hello Clayton, We get this question a lot about hitches. There is always the possibility that a hitch can interfere with the hands-free lift gate, but you can typically move your foot to the right or left of the receiver to get it to still work.…

Hi Steve! We do have a Class IV hitch available for your 2021 Ford Ranger, but the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #DT35PR is specifically for a 2024 to 2027 (so far) Ranger. For your 2021, you will want…

Hello Jacob, thanks for reaching out. We do carry the EcoHitch #EH75SR but I am sorry to say we do not offer the receiver attachment by itself. You may want to try reaching out directly to EcoHitch to see if they can provide one. Otherwise the only…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Robert, the Access tonneau cover part #A24AU can work with a ladder rack but it has to be one that attaches to the top of the bed rails and not one that wraps around them like the Yakima Overhaul. For a ladder rack that installs like that the…

Good morning Brianna! On a good sunny day, a 100W panel like the Rich Solar #RS27VR can produce about 30–35 amp-hours of power over 5–6 hours of direct sun. That’s ~6 amps of charge per hour which is enough to recharge a partially depleted 100Ah…

Hello Mike, thanks for reaching out. We do offer a trailer hitch for the 2025 Toyota Grand Highlander Max Hybrid Platinum. For that I recommend the following: - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"…

Thanks for reaching out Mike! I spoke to Weigh Safe and only their Cerakote aluminum ball mounts are made in the USA. All other steel and aluminum ball mounts, including the steel 180 PRO models, are manufactured overseas. If you wanted an American…