View Cart
Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards

Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards

Item # Y04075

lowest price pledge


Our Price: $299.00

You Save: $64.09
Watersport Carriers

This item qualifies for Free Shipping

Shipping Weight: 16 lbs

In Stock, Ships Today
Y04075 - Saddle-Style Yakima Watersport Carriers
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Paddle Board
  • Roof Mount Carrier
  • Yakima
  • Saddle-Style
  • Aero Bars
  • Factory Bars
  • Round Bars
  • Square Bars
  • Elliptical Bars
  • Rear Loading
  • Clamp On - Standard
  • No Load Assist
  • Locks Included
This padded carrier lets you transport 2 SUPs on your roof rack. Built-in straps adjust along internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars. Lowest Prices for the best watersport carriers from Yakima. Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards part number Y04075 can be ordered online at or call 800-298-8924 for expert service.

  • All Info
  • Reviews (8)
  • Q & A (53)
  • Videos (1)
  • Photos
  • Why etrailer?

Yakima Watersport Carriers - Y04075

This padded carrier lets you transport 2 SUPs on your roof rack. Built-in straps adjust along internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars.


  • Roof-mounted carrier holds up to 2 stand-up paddleboards (SUPs) fin side up on your roof rack crossbars
  • Integrated straps secure your boards to the carrier
    • Straps adjust along built-in tracks to accommodate boards up to 36" wide
    • Slots on bottom of carrier contain strap ends to eliminate flapping
    • Pads on straps protect board rails and provide extra grip
  • Integrated rollers let you easily load an oversized board
  • Tie-down straps and stainless steel hook secure tail of board to your vehicle
    • Secure bottom board if 2 boards are mounted
  • UV-resistant, synthetic rubber strips on arms protect your board from scratches
  • Simple, clamp-on installation on most crossbars - no tools required
    • Adapters included to keep carrier from sliding on round bars
  • Same Key System (SKS) locks secure boards to the carrier and the carrier to your vehicle
  • Lightweight extruded aluminum with glossy black powder coat finish resists corrosion


  • Application: round, square, aero, elliptical, and most factory crossbars
    • Maximum crossbar dimensions: 3-1/2" x 1-11/16"
    • Minimum crossbar spread: 24"
  • Carrying capacity: 2 boards
  • Weight capacity: 66 lbs
  • Maximum stand-up paddleboard width: 36"
  • Integrated strap length: 62-1/2"
  • Carrier width: 40-1/8"
  • Tie-down length: 11' 10"
  • Limited lifetime warranty

Yakima SUP Dawg Crossbars

The SUPDawg lets you carry 1 or 2 SUPs fin side up on your vehicle's roof rack. This padded aluminum carrier includes integrated, adjustable straps, rollers for easy board loading, and a tail tie-down to secure your boards. The SUPDawg mounts to most crossbars without tools, and it includes locks to secure your boards to the carrier and the carrier to your vehicle.

Built-In Straps and Tie-Down Anchor

The carrier has integrated straps that adjust along built-in tracks to snugly secure your boards. The straps can be tightened or loosened by pressing the red buttons on the end of each arm.

Elastomer pads on the straps help grip your boards, and they protect your board rails against strap abrasions. The polypropylene straps and UV-resistant pads will last through many years. And built-in slots in the carrier contain excess strap length to prevent flapping as you drive.

Yakima SUP Dawg Tie Down

The included tie-down strap acts as an anchor - securing your SUP to your vehicle. The strap connects to a tie-down point on the tail of your board and hooks onto your bumper. If you are carrying 2 boards, secure the strap to the bottom board. A cam buckle lets you adjust the tension, so you can secure your board without damaging it. A flexible elastomer sleeve along the tie-down strap also protects your bumper from abrasions.

Easy Loading with Integrated Rollers

Yakima SUP Dawg Roller

Rollers are built into the ends of the carrier to help load large, heavy boards. Just set your board on the edge of the carrier, and push the board onto your roof.

Simple, Clamp-On Installation

Yakima SUP Dawg Clamp

The SUPDawg's mounting clamps fit most crossbar configurations without the adapters. To install, simply place the carrier on your crossbars and turn the integrated handles until the mounting clamps are tightly secured. If you have round crossbars, the included adapters will provide a secure fit, preventing the cradles from twisting or sliding on the bars.

Added Security

Yakima SUP Dawg SKS Lock

Locks on the ends of the carrier secure your board to the carrier and the carrier to your roof rack. After your board is loaded and the straps are pulled through to the back of the carrier, use the locks to secure it in place. Yakima's SKS cores can be swapped out to make all your Yakima locks keyed alike.

8004075 Yakima Sup Dog Roof-Mounted Stand Up Paddle Board Carrier

Y04075 Installation InstructionsInstallation Details Y04075 Installation instructions

Video of Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Yakima SUPDawg Stand Up Paddleboard Carrier Review

Today we're going to be taking a look at the Yakima SUPDawg Stand-Up Paddleboard Carrier with Tie-Downs. Part number Y04075. The Yakima SUPDawg allows us to carry up to 2 stand-up paddleboards as you could see here today. It has built-in integrated straps that run over our paddleboards along with the pads on the straps that help keep our paddleboard from sliding around and also help protect it's finish. The straps simply come down through the cams of the carriers and go down underneath. You pull them tight and you can tuck the excess strap up under and through the carrier.

It features four locks. Two on each carrier. The first one is to lock our straps in place. Once we get them run through, we lock it and then they can't be gotten into and then the second one is with our carriers on our roof rack system. Once we have those locked in place, the carrier can't be removed from the vehicle.

It also features these nice integrated rollers on each of our carriers that make it easy for unloading and loading our paddleboards. It's made of a lightweight aluminum with a glossy black powder coat finish and it's going to resist corrosion. The pads on our straps are UV resistant so carriers also have a rubber padding on top to keep a board from sliding around and also to protect it. The maximum carrying capacity is 66 lbs and it features a limited lifetime warranty. Now that we've gone over some of the features, I'll go ahead and show you how to install this. Keep in mind this will fit round, square, elliptical and aero bars.

Today, we'll be working with the Yakima round bars so we want to use our adapter. We want to make sure that the notch portion is facing up when it goes around our bar. We'll open it up, put it around the bar and close it back up. That way it stays on there. Repeat that same step on the other sides.

Now that I've got my adapters in position, I'm going to grab the carrier. I'm going to make sure that the wing nuts are loosened up. That way can just simply slip it over my adapters. Those are pretty good. You'll also notice that I did favor that side of the vehicle. That way I can make sure it's easier for unloading and loading my paddleboard and also so I can get access to my button and my lock. We'll just place it on the adapter and then line the other one up as well. We've got it lined up on our adapter. Let me go ahead and start tightening this down a little bit. That way it starts grabbing it and then I can fine tune it later. That one seems to becoming together okay. I'm going to tighten this side up a little bit. Once it starts pulling together, we can alternate tightening. Let me go ahead and repeat that same process on this bar. One quick thing, we want to make sure that we have a minimum distance between our carriers of 24 inches. We've got 28 here today so we'll go ahead and continue with that. Make sure that our clamps are open. Sit them on top of our adapters and begin tightening that down. Once again, we'll just tighten them down enough to squeeze it and then we'll straighten it before we finally tighten it down all the way. Now that we've got this installed, let's go ahead and do a couple of paddleboards on top but first, let's push our button back here, pull out our strap. Do that on both sides. First we'll grab our larger of the 2 paddleboards. Make sure that our fin is facing forward. The we'll just roll it up. Also checking that we're not hanging off the back to much. We'll center it up with our carriers. That looks pretty good. Yakima recommends that if you use 2 paddleboards, you use padding between the 2. It is not provided or included with the kit but we're going to use foam here today. We'll go with that there. Now, we'll grab our second paddleboard and ideally its going to be smaller with the fin forward, we'll put it on top of our other one making sure that it sits nicely on the pad. Then you just kind of work it on so you get centered up. Let me get down and check that out. Make sure we're not hanging off the back. Make sure it's centered in the front. That looks pretty good. Next, we'll grab our straps and we'll put them over the paddleboard. You'll notice on the straps, they've got these rubber pads. These are to help keep our paddleboards from sliding around. Now we'll come over to this side, grab our strap once again, checking our pads, making sure they're making good contact with our board. Then we'll feed our strap down through in front of the rubber wheel. Once we get that strap down through, you want to make sure to pull it down tight. Just kind of help it feed through. That way the cam buckle inside holds the strap tight. Now let's repeat that same step on this side. Now, we've got this side tightened, we want to make sure and go back and check our other side as well before we get on the road. Now that they're both tight, we'll grab our strap and we'll tuck that in underneath. Let's do that same thing on this side. It also includes the strap so you can secure them safely before we get on the road. We'll start by running a loop in through and then putting our cam buckle through the loop. We'll grab the other part of our strap and you'll notice one side has rubber padding. This is so we don't damage the finish on our vehicle. We'll put one end up through the cam buckle and we'll come underneath. You can adjust this if we need to. Then we'll grab our hook. We'll put our hook in place and then we'll go and find a secure point underneath our vehicle and then we can tighten it up. We'll get this tightened down a little bit and then we can adjust our pad as need. You could see I need to come down a little bit. We'll put it at about that position and then we'll pull down tight. Then our last step is to tie up our excess strap and then we can hit the road. That's going to complete our look at the Yakima SUPDawg Stand-Up Paddleboard Carrier. Part number Y04075. .

Customer Reviews

Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards - Y04075

Average Customer Rating:  4.9 out of 5 stars   (8 Customer Reviews)

This padded carrier lets you transport 2 SUPs on your roof rack. Built-in straps adjust along internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars.

- Y04075

Received the the Thule accessories and Yakima Supdog from It was all nicely packed into one box. As the box said, "the bottom of this box should not be the end of the relationship" I can tell you it won't be! The items were shipped quickly, and they followed up with an email to make sure all was received well. Love the customer service! Also, the Yakima Supdog product is great. Took no time at all to get it on my truck and load up the 2 paddleboards. It was exactly what I was looking to get! Thanks! 272901

- Y04075

The SUPDwag is easy to install and use. Made for Stand Up Paddle boards, but it can work with Surfboards. Wish it was a little bit narrower, hopefully Yakima will make smaller one for the surfing market. I turned my unit around to the driver's side for loading, also protects rain from getting in the lock when driving. 251463

- Y04075

After doing some research decided to go with the Yakima roof rack setup for our VW Atlas. Love the look and functionality of it all. Got the SUPDawg paddle board carrier to go with it. Love the locking capability for piece of mind when leaving boards unattended. We are VERY happy with our choice. Drove on highway with two paddle boards and it all went smoothly with zero wind noise whatsoever. Definitely worth every penny. Will recommend. 652938

- Y04075

Great product. It works very well with two paddle boards. We can’t wait to use it as much as possible this summer up at Lake Tahoe. 618034

- Y04075

When purchased I was concerned that the clamp down to my cross bars wouldn't work. Upon delivery I installed the SUBDawg immediately with no problems what so ever, the universal type clamp worked well. My wife and I put both paddle boards on after the install and went for a ride up to 70 mph, we felt no movement. The engineering of the tie down is awesome. I highly recommend buying the Yakima SUBDawg. 572338

- Y04075

Put these on a Subaru Forrester. Very easy. Love the excess cord storage. Snugged down my paddleboard so well I didn't need the front tie down. 291441


Love it.

Dawn G - 09/05/2017


- Y04075

Fast shipping. Good price. Nice product. Easy fit and install 253804

- Y04075

Great communication! 231165


Ask the Experts about this Yakima Watersport Carriers
Do you have a question about this Watersport Carrier?

  • Paddleboard Carrier and Roof Rack Recommendation for 2017 Mazda CX-5
  • The Yakima Paddleboard Carrier SUPDawg part # Y04075 that you referenced will be a great option, but let's get you set up with a roof rack on your 2017 Mazda CX-5 first. For that the Yakima aero bar roof rack that consists of part numbers # Y00425, # Y00146, # Y06130, and # Y06154 is a confirmed fit and would work well. The bars of this give the least amount of wind resistance which means minimal wind noise.
    view full answer...

  • Recommended Stand Up Paddle Board or SUP Carrier for T-Slot Mounting
  • The Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards # Y04075 is not able to be mounted to the top of rails with t-slots. However, we do have an option that will fit your desires. I recommend the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards # INXA445. This carrier will fit the T-slots of your crossbars, headache rack, or ladder rack. It comes with the locks included. I've attached a video to assist.
    view full answer...

  • Roof Rack, Kayak and SUP Carrier for a 2009 Pontiac Vibe
  • I have a solution for you, however the Yakima Q-Tower system is being discontinued. Instead, I recommend using a Rhino-Rack square bar kit for your vehicle, which will provide similar mounting options as the round bar. Frankly, I prefer the square bars because they are easier to fit to on the whole. Remember to check your vehicle's roof capacity before adding a roof rack. This capacity will include your roof rack, accessory carriers, kayak and SUPs. The square bar kit for your vehicle...
    view full answer...

  • Standup Paddleboard Carrier for a 2006 Hummer H2 with Factory Roof Rack
  • For your 2006 Hummer H2 with factory roof rack you can use the Thule SUP Shuttle, # TH811XT, to carry your standup paddleboard. I have included a link to a video review for you. This carrier has a 2 board maximum capacity and is rated for 110 pounds. It will accept a paddleboard up to 34 inches wide. You could also use the Yakima SUPDawg, # Y04075, which can also hold up to 2 boards and has a 66 pound capacity. But, it can hold boards up to 36 inches wide. I have included a link to...
    view full answer...

  • Yakima or Thule Roof Rack Paddleboard Carrier Recommendation
  • Since you said you want a paddle board carrier that locks the obvious choice in my opinion is the Thule SUP Taxi part # TH810001. This carrier is easy to load and use as well as is compatible with round bars like what you have.
    view full answer...

  • Recommended SUP Carrier for 2013 Subaru Forester with Factory Roof Rack
  • To transport your SUP on your 2013 Subaru Forester, I recommend looking at the Yakima SUPDawg Stand-Up Paddleboard Carrier # Y04075. This is a great carrier that features heavy-duty straps with stainless steel hooks that will safely and securely hold your board in place. The saddles have synthetic rubber strips on the arms to protect your boards from scratches and the interaged locks will protect your investments. I have attached a demonstration video so you can see all of the specific...
    view full answer...

  • Antenna Clearance When Transporting Stand-Up Paddleboards on 2013 Ford Escape or 2013 Toyota RAV4
  • When it comes to a stand-up paddle board carrier that will clear the antenna on a 2013 Ford Escape or a 2013 Toyota RAV4, I recommend taking a look at the Thule SUPDawg, part # Y04075. We installed this carrier on a Toyota 4Runner and as you can see in the attached picture, there is quite a bit of room between the roof and the paddle board so you shouldn't have any problem with antenna clearance.
    view full answer...

  • Availability of Roof Rack for 2005 Scion tC to Carry Paddleboard
  • To install a paddleboard carrier on your Scion tC, you would first need to install a roof rack that would provide an attachment point between the carrier and the vehicle. A rack can be constructed by combining the following parts from Yakima: Round 48 inch crossbars, part # Y00408 Yakima Q Towers, part # Y00124 Front vehicle-specific Q-clips, part # Y00699 Rear vehicle-specific Q-clips, part # Y00683 Once the roof rack is in place, the Yakima SUPDawg Stand-Up Paddleboard Carrier,...
    view full answer...

  • Will Yakima SUPDawg Hold 2 Stand Up Paddleboards in Protective Bags
  • The protective bag material is usually not very thick so you should not have any problems loading the 2 stand up paddleboards onto the Yakima SUPDawg, # Y04075. This carrier will accept 2 boards up to 36 inches wide so provided the boards are within those specs you should be good to go.
    view full answer...

  • Will the Yakima SUPDawg Paddleboard Carrier Fit the Rola Ladder Rack on a 2015 Toyota Tacoma
  • I am happy to report that both parts are compatible with each other! The Rola crossbars on ladder rack # 59799 are 3-1/8 inches by 1 inch so the Yakima SUPDawg carrier # Y04075 will fit. The carrier is compatible with bars up to 3-1/2 by 1-11/16 inches.
    view full answer...

  • Can the Yakima SUPDawg Stand-Up Paddleboard Carrier Hold a Paddle Board and Surf Board
  • The Yakima SUPDawg Stand-Up Paddleboard Carrier, # Y04075, can handle 2 boards of different sizes so you should not have a problem putting a paddle board and a surf board on the carrier together. I have included a link to a video review of the carrier for you.
    view full answer...

  • How to Carry 2 Kayaks and 2 StandUp Paddleboards with a Yakima Rack on a 2015 Subaru Outback Wagon
  • The Yakima BigStack part # Y04041 would work great for carrying your 2 kayaks, and then for a carrier that would carry both your SUPs you would want the Yakima SUPDawg part # Y04075 which can carry up to 2 SUPs.
    view full answer...

  • Is Yakima SUPDawg Stand Up Paddleboard Carrier Compatible w/ Thule Xsporter Truck Bed Ladder Rack
  • According to Thule, the crossbars used on their TH500XT Xsporter ladder rack measure 3-1/2 inches wide by 1-1/4 inches tall. The Yakima SUPDawg # Y04075 stand up paddleboard carrier is compatible with a crossbar of that size, it fits crossbars up to 3-1/2 inches wide and 1-11/16 tall.
    view full answer...

  • What Is Crossbar Distance Needed For Roof Rack Paddleboard Carriers
  • There is no preferred crossbar spread listed for the paddleboard carriers we offer. They do however list the minimum crossbar spread at 24-inches. This is the minimum distance needed for part # Y04078, part # TH811XT, part # S65141, and # Y04075. Each carrier has weight capacities and crossbar dimensions, so you want to make sure you select the right carrier that will work for you. If you want to let me know what roof rack system you are using I will be glad to make recommendations that...
    view full answer...

  • Fitting a 2012 Honda Pilot With 78 Inch Roof Cross Bars to Carry a Canoe and Stand Up Paddleboard
  • 78" bars on a 2012 Honda Pilot is possible. You will need a specific kit to do so and check your local laws and ordinances for any requirements for flagging your load. If the 78 inch bar, part # Y00411 isn't legal in your area, you can use the 66 inch bars, part # Y00410. Your best combination is going to be using two saddle-style mounts that carry the canoe hull side down, as its curved bottoms will allow for the most space to be freed up. Most SUP carriers are very low-to-the-rack...
    view full answer...

  • How to Carry a Kayak and Two Paddleboards on a Yakima Rack and Roll Trailer
  • Your Native Ultimate 12 kayak would work great on the Yakima Rack and Roll Trailer # Y08106 that has 66 inch wide crossbars. The Yakima EvenKeel part # Y04052 would work best on a kayak of your size and then for paddleboard carriers the # Y04075 which can carry up to 2 at a time would work great and would allow you to fit everything on the trailer.
    view full answer...

  • Recommended Thule SUP Taxi Carrier For 2017 Honda CRV With Factory Roof Rack
  • The Thule SUP Taxi Stand-Up Paddleboard Carrier - Roof Mount - 2 Boards # TH810001 will work on your 2017 Honda CR-V as long as the crossbars are no bigger than 3-1/2 inches by 1-3/4 inches and have a crossbar spread center to center of at least 24 inches. This carrier will carry 2 SUPs fin side up on your crossbars as long as the weight of the 2 boards doesn't exceed 55 lbs..
    view full answer...

  • Will Yakima SUPDawg Paddleboard Carrier Fit on a 2017 Subaru Crosstrek
  • If you have the factory roof rack on your 2017 Subaru Crosstrek the SUPDawg paddleboard carrier, part # Y04075, is confirmed to fit. If you don't have the factory crossbars on your Subaru you can add a complete roof rack and still use the SUPDawg. I recommend the Yakima RailBar, part # Y00448-0449. It's a great looking, factory-like roof rack. Check out the video I linked of it on a 2014 Crosstrek. The SUPDawg includes Yakima SKS lock cores already. The RailBar doesn't include...
    view full answer...

  • How to Carry a Kite Surfboard on a Roof rack
  • Boards like your kitesurf board are too thick for ski carriers but we do have surf board and paddleboard carriers that would work. We have the follow: Thule SUP Shuttle # TH811XT Yakima SupPup # Y04078 Yakima SUPDawg # Y04075 Inno carrier # INA446 Inno Boardlocker # INA744 I have linked video reviews of a couple of these carriers for you.
    view full answer...

  • How to Carry a Kayak and SUP on the Roof of a 2017 Toyota Tacoma
  • If you have the full factory roof rack on your 2017 Toyota Tacoma with both side rails and crossbars then we wouldn't have anything to work in conjunction with this. However, if you just have the factory raised side rails then you can add crossbars using both part # Y00422 and part # Y00147. You can also add locks using part # Y07204. The crossbars are 60" long and are of an aero shape which will provide less wind resistance/drag. As far as whether or not you will be able to carry both...
    view full answer...

  • Bike Rack and Paddleboard Carrier Recommendation for Yakima Rack and Roll Trailer
  • For what you plan on carrying you would need the wider Yakima Rack and Roll part # Y08107 that you referenced. All of the SUP carriers we offer are designed to carry the board flat on the bars so that would be the route needed to go for carrying one. For that you would want the Yakima SUPDawg part # Y04075 which will fit the bars of the Rack and Roll well. A very popular bike rack to use with the Rack and Roll is the Frontloader part # Y02103 which allows you to keep the front wheel...
    view full answer...

  • Product Dimensions of Yakima SUPDawg Stand-Up Paddleboard Carrier
  • I certainly hope you are able to fit this unit along with your vehicle into your garage. The product dimensions of the Yakima SUPDawg Stand-Up Paddleboard Carrier # Y04075 are L 40.00in x W 6.00in x H 6.00in.
    view full answer...

  • How to Carry 2 SUPs and 2 Kayaks with a Toyota RAV4
  • Since you are needing to carry 2 SUPs and 2 kayaks together you are actually going to need a trailer to transport them with your RAV4. SUPs are very wide and since they have to be carried flat and not on their sides its really hard to get a whole lot to fit together. You may be able to install a Yakima roof rack with longer crossbars on your RAV4 but the SUPDawg # Y04075 alone takes up 40-1/8" of crossbar space so you'd need 70"+ crossbars to fit the BigStack # Y04041 and 2 more kayaks. For...
    view full answer...

  • Carrying 2 Stand Up Paddleboards with Darby Load Extender on a 2013 Chevy Silverado
  • The Darby load extender and single roof rack bar # DTA944-968-924 can handle the 2 paddleboards but you will need a paddleboard carrier as well to safely secure and protect the boards. The Thule SUP Shuttle # TH811XT has a good price and holds 2 boards up to 34 inches wide. Only the SUPDawg, # Y04075, can handle wider boards and it maxes out at 36 inches. These carriers also include tie downs to secure the "bow" and "stern" of the boards. I have included video links to all of the...
    view full answer...

  • Roof Racks And SUP Carrier Recommendation For 2012 Toyota Prius V And 2014 BMW X5
  • The first thing you will want to do is find out what the roof weight capacity for your 2012 Toyota Prius V and 2014 BMW X5 are. A quality roof rack I recommend for your Prius is the Thule WingBar Evo. This system features premium aluminum crossbars that are some of the quietest on the market. The T-slots on the crossbars allow you to mount a variety of T-slot accessories. To order this roof rack system you need to order part # TH711400, part # TH710501, and part # THKIT1668. The bars...
    view full answer...

  • Paddleboard And Kayak Carrier Recommendations For 2010 Ford Escape
  • The biggest concern with using both a paddleboard carrier and a kayak carrier on the roof of your 2010 Escape is the crossbar room that is required for the carriers. The SUPDawg Stand-Up Paddleboard Carrier, part # Y04075, measures 40-1/8 inches wide. Depending on the kayak, you may have a tough time trying to fit both on the crossbars. A carrier like the Yakima Hullyroller, part # Y04035 has rollers that are placed on the rear crossbar and allow you to load your kayak by placing...
    view full answer...

  • Paddleboard Carrier Recommendation for Carrying Two 36 inch Wide Paddleboards
  • The Yakima SUPDawg carrier part # Y04075 that you referenced would do a great job carrying your two boards as it is designed to carry two boards that are up to 36 inches in width. I would need to know the year/make/model of your vehicle though to pick out a roof rack.
    view full answer...

  • Will I Be Able to Fit a Kayak and Stand Up Paddle Board on a 2016 Jeep Cherokee with 53 Crossbars
  • You will be able to fit both your kayak and stand up paddle board on the top of your 2016 Jeep Cherokee with your Thule AeroBlade roof rack. Make sure you do not exceed 150 lbs. of weight on your roof as that is the maximum weight allowed on top of your vehicle. To carry your stand up paddle board, you have more options than just pads. I recommend the Yakima SUPDawg Carrier # Y04075. This carrier is more secure than just pads as this carrier can lock and steel-reinforced straps hold...
    view full answer...

  • Recommended Locking Roof Rack Carrier For Surfboard On 1998 Subaru Forester
  • We do have a locking carrier that will work for your surfboard as long as it is not wider than 36 inches. I recommend the Yakima SUPDawg, part # Y04075. This can hold up to 2 boards. This system has locks that secure the boards to the carrier, and the carrier to your crossbars. This has a weight capacity of 66 lbs.
    view full answer...

  • Roof Rack and Stand Up Paddleboard Carrier for a 2008 Audi A4
  • One of the better kits we have for SUP boards are the aero-style crossbars. These assist in carrying Stand Up Paddleboards by being aerodynamic themselves, and their wider bases providing more stability for the boards. I recommend the Thule AeroBlade Traverse kit, consisting of: Thule WingBars, 47 inches, Silver, part # TH711200 or Black, TH711220 Thule Rapid Traverse Foot Pack, part # TH480R Thule Fit Kit, part # THKIT1212 Thule is compatible with a wide range of accessories...
    view full answer...

Do you have a question about this Watersport Carrier?

  • Why

    At we guarantee:

  • Highest quality watersport carriers for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate watersport carrier information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Kathleen M
Photos by:
Amber A
Photos by:
Sam P
Written by:
Lisa S
Updated by:
Daron K

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!

Call 800-298-8924