2012 Chevrolet Tahoe Roof Rack by Yakima
Roof Rack Includes:
Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 4
Part Numbers: Y00422,Y53TR,Y00221
Retail:$619.00
Our Price: $509.00
You Save: $110.00
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2
part number: Y00422
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
- Aero-style, steel crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit
- Aerodynamic, teardrop shape helps to create a quiet roof rack system
- Controls air flow to significantly reduce wind noise and vibration
- Reduces drag to help maintain your fuel efficiency
- Full-length crossbars maximize space for clamp-on carriers and accessories
- Accommodate most universal-mount bike, water, snow, and cargo carriers
- Easy installation on Yakima towers with included brackets and hardware
- Works with BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Roll-formed, galvanized steel bars are extremely strong and durable
- Black vinyl coating protects the bars from corrosion
- Plastic endcaps help to keep water and debris out of bars
Specs:
- Quantity: 2 crossbars
- Crossbar weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 60" long x 2-3/4" wide x 1" tall
- Limited lifetime warranty
The aerodynamic Yakima CoreBars let you build a quiet yet heavy-duty roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. The bars are constructed of galvanized steel so they can carry more weight than traditional aluminum aero bars. And they're coated in black vinyl to help prevent corrosion.
Aerodynamic Design
The CoreBar's teardrop shape controls air flow over and under the bar to significantly decrease wind noise and vibration even at highway speeds. This lessens the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Heavy-Duty Steel Construction
The Yakima CoreBar is constructed of roll-formed, galvanized steel. This heavy-duty steel construction enables the CoreBars to carry significantly more weight than traditional aluminum aero bars (up to 220 lbs depending on the weight capacity of your roof). The bars are also coated in black vinyl to protect them from corrosion.
Hassle-Free Installation
The CoreBars install on any of Yakima's StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine - with included brackets. Just remove the endcaps, slide the brackets onto the bars, and replace the endcaps. Then place the bars on your towers with the brackets seated in the tower BarBeds. Use the torque tool included with the towers to tighten the bars in place.
Maximum Cargo Carrying Capacity
The full-length CoreBar extends past your towers to provide more space for mounting carriers and accessories on your roof. The CoreBar is also compatible with most universal, clamp-on carriers and accessories.
8000422 Yakima Core Bar Cross Bars - Steel - Aero Profile - 60" Long - Qty 2
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4
part number: Y53TR
Heavy-duty towers let you safely mount 2 Yakima crossbars to a vehicle with fixed mounting points, flush side rails, or a track system. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
Specs:
- Maximum tower load capacity: 165 lbs
- Limited lifetime warranty
The heavy-duty SkyLine towers allow you to mount 2 Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks. The towers adjust during installation to ensure your crossbars are level. The SkyLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's Landing Pad system .
Versatile BarBed
The SkyLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the SkyLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening.
Simple Installation with Landing Pads
The towers install with custom-fit Landing Pads . To mount a tower simply open the cover, set the tower on the Landing Pad, and close the cover.
Mounting posts on the bottom of the tower extend when the cover is closed to lock the tower in place on the Landing Pad.
Each tower's pitch can be adjusted up to 6 degrees forward or backward during installation. This lets you create a level mounting surface for your gear even on a curved roof. Simply loosen the bolt near the top of the tower assembly, adjust the position of your bar, and then re-tighten the bolt.
Same Key System Locks
SkyLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 4
part number: Y00221
Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.
Features:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with C-shaped factory rack tracks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Specs:
- Quantity: 4 pads
- Lifetime warranty
8000221 Landing Pad 1 for Yakima Control or Sky Line Towers
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 - Y00422
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 - Y53TR
Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 - Y00221
Average Customer Rating: 4.9 out of 5 stars (1171 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories. Heavy-duty towers let you safely mount 2 Yakima crossbars to a vehicle with fixed mounting points, flush side rails, or a track system. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with standard, C-shaped rack tracks. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.by: See11/03/2022
with so many variables having someone that could sort through all them was very helpful Thanks etrailer
by: Nelson06/26/2023
It was what it was advertised and fit perfectly on my 2023 Ford Maverick
by: Doug02/16/2022
First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.
Doug
2/18/2023
Ive had the rail system on my truck for about a year now and its been a tremendous help. It allows me to still use my bed and provides much needed extra storage space, mostly for all the dog items we carrycrates, gates, beds, food, etc. I like the fact the rail locks to the truck so I dont need to remove them at home or at our destination.
by: Rob04/19/2023
Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.
by: David P08/12/2017
2011 Honda Element
Was skeptical at first because I needed the posts as well for my 2011 Honda Element. The Honda crossbars were not adequately weight rated and is why I opted for Yakima. Couldn't be happier with my choice as this assembly has served me well throughout the year.
by: Eric 05/13/2024
Subaru Forester
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: Layne 02/11/2024
2022 Ram 3500
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Bryan03/27/2024
Very nice and heavy duty. They don’t look too fragile on a lifted truck with oversized tires.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Karen06/06/2020
Perfect. Perfect. Easy to install and high quality. Confident in this product. Excellent instructions. Used with towers of course! Towers and crossbars have demonstrated to be strong and durable with several trips with kayaks.
by: Frank P.03/06/2016
Fit good with the OE track on roof. I like the new covers they supplied with the mounts.
by: David05/09/2018
Ford Flex
We purchased the Yakima Skyline Towers roof rack with the Jet Stream crossbars. Took about 2 hours to install on the naked roof of our Flex. I drilled through the roof strip for the mounting bolts and they fit tighter than the factory rails. Very happy with our choice.
by: Michael01/22/2023
2019 Mercedes-Benz E-Class
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Benjamin06/21/2020
I ordered the wrong set up for my car, but the excellent customer service specialist set me up and expedited my roof rack that fit perfectly. I highly recommend calling and speaking with the knowledgeable staff about your needs. I'm super happy with the experience overall!
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
by: Judith04/13/2021
2020 Subaru Impreza
Product was packaged well, arrived in perfect condition.
Instructions easy to follow. Installation took less than (1) hour. I did it alone & I’m 76 yrs. old.
Is very sturdy. Looks good on my 5 door Subaru.
The feature that impressed me the most in dealing with your company was how I was able to track my package inside your facility with the name of the employee handling the item before it even shipped. Very organized. Would definitely recommend you to others & purchase from you again.
by: Aaron 02/10/2024
Perfect match
by: Carl 07/08/2023
Item was as described and shipping was fast. Overall very satisfied with trailer. Will definitely order my stuff from them
by: Pat G08/29/2013
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
by: David08/28/2020
2019 Toyota Highlander
I have not bought car roof racks for decades--back when there were those very useful rain gutters. So I was shocked with the high prices. But what you get today is much more carefully engineered with a complicated construction. This Yakima version even comes with a manual 3.5 mm hex driver which turns out to be a torque wrench too. You use it 16 times, torquing to its limit, in installing the two cross rails on the four towers. Years ago you installed the towers where you wanted them on the rain gutters and adjusted the cross rails by sight. No more. You must go on line to Yakima. You must get the precisely engineered dimensions for your exact vehicle. You even adjust the towers for the roof slope and any toe-in of the roof line. Pay attention to the precise instructions. The result is very solid. I wish that I had more space between the cross rails. There is room for another 6 or 8 inches given where the door openings on my 2019 Toyota Highlander are spaced. But then the rear base clips would be different and that logistics would add yet more to the price. I am confident that I can secure a 4 X 8 sheet of plywood on the cross rails. And I will find my vehicle in the mall parking lot easier with those good looking rails. While I am happy with the end product, I wish the vendors had given more explanation of the fixed dimensions of today's installations. That would have helped make my on-line shopping less frustrating. Part of the problem is that Yakima and Thule do not provide cross rails for my LE Highlander's existing tower bases. And I could not get 60 inch cross rails on any of the versions that fit my LE's bases.
by: Bill12/13/2016
I want to thank the staff at eTrailer for their outstanding support. After my roof rack order got off to a shaky start the customer service staff stepped in and made it right; 100% RIGHT. I cannot thank them, and eTrailer, enough. Regarding the roof rack itself, I have now installed it and can vouch that the installation was a breeze. All parts fit and the instructions were correct. For the record, this is not my first purchase from eTrailer (I've bought hitch items from them before) and it won't be my last. They have ALWAYS given great service, their web site works, their products and descriptions are good, etc., etc. Thank you!
by: Hogan06/09/2023
I’ve placed 2 separate orders with etrailer in the last 6 weeks. Their service, response, pricing and follow-through have been terrific each time. I will use them every chance I get.
by: Floyd 07/30/2022
2019 Toyota Tacoma
The 60" CoreBar Crossbars will be much more useful to us than the original 50" bars placed on our shell at the factory. The only issue I had was that there were no instructions with the bars. It took a little while for me to figure out how the old bars came off and how to put the new ones on but I'll consider that a learning experience.
by: Lee09/06/2020
The instructions were different for another set of bars. Was a pain to get right...all the measurements on Yakima were off...I figured it out on my own...should have got Thule or nicer bars ..end caps were not good either...flawed fit... otherwise will do just not happy with the product perse or instructions...delivery good...will see how they do.
25
387
Show More Reviews Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- Can 60 Inch Yakima CoreBar Roof Rack Be Used on 2021 Mazda 3
- You can indeed use the longer 60 inch Yakima CoreBar crossbars. To equip your 2021 Mazda 3 with a Yakima CoreBar roof rack, you'd need the following:
• Yakima 60 Inch CoreBar, part # Y00422
• Yakima SkyLine towers, part # Y53TR
• Yakima Landing Pad 22, part # Y00248 which attaches towers to existing mounting points on vehicle roof.
I'll link to some product videos that you might find helpful.
view full answer... - How Many Crossbars Do I Need for Yakima Track System?
- You only need two crossbars for the Yakima track system installed on the camper shell on your 2018 Ford F-250 to use most accessories. If you need crossbars, I recommend the Yakima CoreBar 60" Crossbars # Y00422 with the SkyLine Towers # Y53TR. This will give you the two crossbars and four towers to mount the bars to the track. This crossbar system has a weight capacity of 220 lbs, which is more than enough for your kayak and gear.
If you are needing a kayak carrier, I recommend the
view full answer... - Yakima Aero Crossbar Roof Rack Recommendation for 2013 Nissan Rogue
- The parts you need to install the Yakima aero bars on your 2013 Nissan Rogue you would want the part numbers # Y00422, # Y28TR, # Y06123, and # Y06135.
This will give you a roof rack that will be quieter than round or square bars.
view full answer... - Roof Rack with 60-Inch Crossbars for 2017 Chevy Suburban with Flush Roof Side Rails
- The Rola Sport REX Series Roof Rack 59685 is a confirmed fit for your 2017 Chevrolet Suburban but this rack comes as a complete kit and no other lengths of bars are available.
If you prefer a longer roof rack crossbar in the 60-inch size we do have options that are displayed on the linked page. Like the Rola rack, all of these Thule and Yakima options feature aero-style crossbars that are quieter than other bar types.
The most cost-effective choice is the Yakima Core Bar/Skyline rack
view full answer... - Recommended Roof Rack for 2020 Toyota Highlander
- The Yakima Roof Rack Kit that uses parts # Y00422, # Y06132, # Y28TR and # Y06153 is a confirmed fit for your 2020 Toyota Highlander with a naked roof. This kit uses aerodynamic Yakima CoreBars to help reduce wind noise and this rack will allow you to carry bike racks or a roof cargo basket like the Yakima OffGrid Roof Cargo Basket # Y07139.
Since this roof rack kit does not come with locks included I recommend adding some with part # Y07204, which comes with 4 lock cores and keys.
view full answer... - Roof Rack and Kayak Carrier Recommendation for 2018 Toyota Tacoma Couble Cab
- You'd need a roof rack confirmed to fit your 2018 Toyota Tacoma Double Cab with longer crossbars like the Yakima Corebar Rack part numbers # Y00422, # Y28TR, # Y06145, and # Y06128 which has 60 inch long crossbars.
You could easily use a SweetRoll # Y04074 for each of your kayaks then with this rack.
This leaves your truck bed open for the tonneau cover and would work well.
view full answer... - Adapter For Yakima ButtDown 6 Ski Rack to Mount to Aero Bars
- There is a way for you to mount your Yakima ButtonDown 6 ski rack to aero bars like the Yakima CoreBar Crossbars # Y00422.
Yakima has confirmed for us that in order to do this, what you will need are the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590.
I have added a link below to the instructions and a video review for you to check out as well.
view full answer... - How To Carry Two Sit On Top Kayaks On a 2005 Honda Element
- The best option for you to haul both the Feelfree Corona and the Feelfree Moken 12.5 on your 2005 Honda Element is with an upgraded roof rack that will allow you to retain the full weight capacity of your vehicle's roof, 165 lbs. For this, I recommend the Yakima CoreBar Crossbar System which is composed of part # Y00422, part # Y53TR, and part # Y00229. The Yakima CoreBar Crossbar System is an excellent option for you because it has aero crossbars for decrease wind noise, overhang past
view full answer... - Roof Rack Recommendatio nfor 2018 Ford F-250 Crew Cab that is Leased
- For your 2018 Ford F-250 Crew Cab the Yakima Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 would be a great solution as it is a confirmed fit and the fact that it does not permanently modify the roof of the vehicle it is installed on. So you'd be able to take the roof off when it's time to return the lease and no one would know the difference.
The aero shape of these bars also helps cut down on wind noise which is a nice feature as well. I attached an install video for thist
view full answer... - Parts Needed to Install Yakima CoreBar and BaseLine Towers on 2022 Ram 1500
- The parts needed to install a Yakima CoreBar roof rack on your 2022 Ram 1500 include the following:
60" CoreBar Crossbars - # Y00422
BaseLine Towers - # Y28TR
Fit Kit Clips - # Y06135 (you need 2 of these)
Lock Core Kit - # Y07204 (optional)
Since you should already have the 60" CoreBar crossbars and BaseLine Towers for your 2020 Dodge Durango you just need 2 of the Fit Kit Clips. Since the pads for the fit kit just kind of pop in place you should be able to pull them off by hand
view full answer... - Does Same Yakima CoreBar Roof Rack Fit 2017 and 2020 Ford F-350
- Yes the Yakima CoreBar Roof Rack part numbers # Y00422, # Y28TR, and # Y06185 is a confirmed fit for both a 2017 and a 2020 Ford F-350 crew cab.
view full answer... - What Roof Rack and Largest Thule Cargo Box Do You Recommend for My Bare-Roof 2022 Kia Telluride?
- For a great compatible roof rack system for your bare roof on your 2022 Kia Telluride, I recommend the following setup:
- Yakima CoreBar Crossbars - Steel - Black - 60" Long - # Y00422
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06125
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06165
- Yakima Same-Key Lock Cores # Y07204
Not only will the Yakima CoreBar system allow you
view full answer... - Transporting Two 68-lb Sit-on-Top Fishing Kayaks on 2017 Honda Ridgeline
- Since your fishing kayaks are fairly heavy at 68-lbs each you could be above the total weight capacity for the roof on your 2017 Honda Ridgeline by the time you add the weight of the Yakima roof rack and the two Malone J-style kayak carriers. Their Downloader # MPG114MD and J-Pro # MPG117MD carriers weigh 12-lbs each so two of these is another 25-lbs or so in addition to the 18-lb weight of the Yakima roof rack. The kayaks and these items total about 179-lbs and that is more than most vehicle
view full answer... - Quality, Cost-Effective Roof Rack Recommendation for a 2016 Ford Edge
- The Yakima round crossbar system is decent but sometimes it can be hard to mount accessories and get them to stay still, plus they don't help with wind noise and drag.
For your application I recommend checking out the Yakima CoreBar roof rack because it has the nice aero-style crossbars but sits at a lower price-point since these aren't the high-end aluminum bars. Here are the parts you'll need for the naked roof of your 2016 Ford Edge:
60" CoreBar Crossbars - # Y00422
BaseLine Towers
view full answer... - Is It Normal for Roof Rack on 2020 Ford Escape to Not Be Level
- Thanks for reaching out!
Roof rack manufacturers choose the strongest parts of the vehicle to have the roof racks positioned so while it will be a little uneven, you'll want to install the Yakima CoreBar roof rack for your 2020 Ford Escape (parts listed below) per the Yakima instructions. It's actually really common for the crossbars to be uneven height-wise due to the curve of the roof, like what you said. As long as you install it per the instructions you'll be good to go!
Here
view full answer... - How to Carry a Kayak and SUP on the Roof of a 2017 Toyota Tacoma
- If you have the full factory roof rack on your 2017 Toyota Tacoma with both side rails and crossbars then we wouldn't have anything to work in conjunction with this. However, if you just have the factory raised side rails then you can add crossbars using both part # Y00422 and part # Y33TR.
You can also add locks using part # Y07204. The crossbars are 60" long and are of an aero shape which will provide less wind resistance/drag.
As far as whether or not you will be able to carry
view full answer... - 60 Crossbar Roof Rack System For 2016 Honda Fit
- You could get these 60" long Yakima Corebar # Y00422 with the Baseline Towers # Y28TR and these two BaseClip Fit Kits # Y06156 and # Y06165. They may stick out a little farther than you expect, so watch your head when you get out of your 2016 Honda Fit!. I've included a video for you to watch to get an idea of how they install.
view full answer... - Recommended Roof Rack for 2016 Honda Accord
- For your 2016 Honda Accord, I highly recommend the Yakima Roof Rack System, which includes parts # Y00422, # Y28TR, # Y06148 and # Y06150. This system features two 60 inch aero-style crossbars that will help to create a very quiet roof rack when installed and reduce wind drag and vibration. The rack is confirmed to fit your vehicle and the installation will be quick and easy using the clamp-style attachments to secure the towers to the roof. While the process is simple and can certainly
view full answer... - Correct Roof Rack Crossbar Size for 2015 Ford Fusion
- We determine the cross bar length to recommend based on the manufacturer's research and testing.
Yakima produces a lot of watersport and snow sport accessories, and their load assist models require that the ends of the crossbars overhang the rack feet. So, a lot of their roof crossbars are naturally longer to provide for this length as an added feature so the user doesn't have to think about how to mount the crossbars to clear the side of their vehicle.
Additionally, this increases
view full answer... - Will the Thule Vector Alpine Roof Box Fit a Medium Sized Golf Bag on a 2020 Kia Telluride
- I have a solution for you. Since the average bag of golf clubs is about 48" long x 12" wide x 12" tall, I recommend the Thule Motion XT Rooftop Cargo Box - 16 cu ft # TH629706.
The Thule Motion XT comes with internal dimensions of 69" long x 31-1/2" wide x 15" tall. In addition, the Thule Motion XT comes with the same SlideLock system with One-Key locks that ensure your cargo is secure. You will be able to fully open your rear hatch if you have a crossbar system on your 2020 Kia Telluride's
view full answer... - Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
- You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following:
- Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length
- Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number)
- SkyLine Towers for Yakima Crossbars # Y53TR
- HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
view full answer... - Yakima 70 Inch JetStream Crossbar Roof Rack for 2020 Toyota Highlander With Flush Roof Rails
- You sure can. You'll need the 70 inch JetStream crossbars as part # Y00427 along with the # Y53TR SkyLine towers and the # Y66VR landing pad kit to make the transition between the fixed mounts in your flush rail and the SkyLine towers. You can also add lock cores with part # Y07204.
I've linked to a demonstration video showing a JetStream roof rack being installed on a 2019 Highlander.
It is important to note that a crossbar system should never extend past the mirrors of your vehicle.
view full answer... - Will Two Bikes and a Kayak Fit on a 2019 Subaru Forester Factory Roof Rack
- If you were to upgrade to an aftermarket roof rack then I believe you would be able to fit two bikes and a kayak on top of your 2019 Subaru Forester but not with the factory roof rack. In order to upgrade, I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y53TR, and part # Y00248 which actually replaces the factory roof rack.
The Yakima JayLow Kayak Carrier part # Y04073 along with two of the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 would then allow
view full answer... - Yakima Parts to Fit American Roll Cover Tonneau Cover on a 2020 Chevy Silverado 1500
- I'd be happy to help!
The Yakima SkyLine Towers # Y53TR are compatible directly with the JetStream crossbars so no adapter kit is needed, but if you're installing this over a truck bed you need the Yakima HD bars which do require an adapter. Unfortunately, crossbars and leg systems aren't compatible from one manufacturer to the other so you'll need to stick with Yakima crossbars for your application.
If you already have the fit kit (which I believe is 2 of the Landing Pad # Y00221)
view full answer... - Can I Use the 60-Inch Yakima JetStream Crossbars to Use My Hullavator on My 2021 Toyota Highlander?
- If you are looking at the JetStream crossbar system for your 2021 Toyota Highlander Hybrid with flush rails, you are correct that you need the SkyLine Towers # Y53TR, Landing Pad 28 # Y66VR, and Lock Cores # Y07204. These etrailer part numbers correspond to the Yakima part numbers you mentioned. However, the JetStream Crossbars 8459629 did not come up with a matching etrailer part number. However, if you are looking for 60-inch bars, those are # Y00426. While Yakima recommends 50-inch crossbars
view full answer... - Recommended Roof Rack and Ski/Snowboard Carrier for 2015 Mazda CX-5 with Naked Roof
- I highly recommend using the Yakima JetStream roof rack for your 2015 Mazda CX-5 because it has a 165 lb weight capacity, mounts directly to fixed points on your roof, and allows you to use a variety of other roof mount accessories. This consists of the SkyLine Towers # Y53TR, Landing Pad 11 # Y00233, and then your choice of JetStream Bars:
50" Black # Y00425
60" Black # Y00426
70" Black # Y00427
You can then use the Yakima FreshTrack # Y03093 and the Lock Core Set # Y07206 to
view full answer... - Aero Style Crossbar Roof Rack for 2021 Buick Enclave
- Thule hasn't yet released a fit for the 2021 Buick Enclave, but Yakima offers an awesome aero-style setup that uses their # Y53TR SkyLine towers, 50 inch JetStream crossbars in black as part # Y00425. You'll also need the # Y00245 Landing Pad which allows the roof rack towers to attach to the fixed points located in the flush mounted rails on the roof of your Enclave.
I've linked to a video showing a typical installation.
view full answer... - Can I Use My CoreBar Crossbars # Y00421 with Raised Rails on a 2017 Honda CR-V?
- While we do have a crossbar option for you, using the SkyLine Towers # Y53TR along with the Yakima CoreBar crossbars # Y00421 will not work on your raised rails on your 2017 Honda CR-V. This is because the CoreBars # Y00421 along with the # Y00148 and the fit kit # Y00245 only fit vehicles with factory flush rails on the vehicle.
With that being said, we cannot confirm what feet/fit kits can attach to your installed rails on your CR-V. Even if we could, Yakima does not make a compatible
view full answer... - Parts Needed to Add Roof Rack to 2004 Ford Escape With Factory Tracks
- We have all the parts you need to add a roof rack to your 2004 Ford Escape, and I think the best option is a round bar system from Yakima because of its value. It is both a quality rack and cost-effective so I strongly recommend it; the rack is made up of the following parts:
- Round 48" CrossBars for Yakima Roof Rack # Y00408
- Yakima SkyLine Towers # Y53TR
- RoundBar SL Adapter # Y03536
- Landing Pad 1 for Yakima Control Towers # Y00221
view full answer... - Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline Towers
- To use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
view full answer... - Parts Needed to Add a Yakima Roof rack to a 2012 Subaru Impreza Hatchback
- The 2012 Subaru Impreza hatchback with naked roof uses Q-clips Q83 for both front and back but that system has been discontinued by the manufacturer. If you can't find them used, then n you will need to upgrade but you can still use your round bars.
What you will need is the Skyline towers # Y53TR, Round Bar Adapter # Y03536, and Launch Pad 22 # Y00248. I also recommend using sks locks # Y07204.
view full answer... - What do I Need to Carry My Bikes and Gear on the Roof of My 2020 Blazer with a Bare Roof?
- To get your bikes and gear on your roof you need a roof rack. Yakima makes a cross bar mounting kit to mount to your flat roof # Y00425, # Y53TR, # Y00245.
Before loading your bikes and gear on your roof, you need to look in your owners manual for the roof capacity of your Blazer.
I recommend the Yakima Front Loader # Y02103 this is a lighter rack which enhances your ability to keep all of your gear on the roof. This is a great single bike rack because there is no contact with the
view full answer... - Yakima Jetstream Roof Rack for 2021 Subaru Outback
- The Yakima JetStream roof rack part numbers # Y00425, # Y53TR, and # Y46VR is an extremely nice roof rack for your 2021 Subaru Outback Wagon.
This is what I would go with because in terms of quality, ease of use/install, quietness, and durability it really is outstanding.
view full answer... - Parts Needed to Install Round Bar Yakima Roof Rack on 2019 Toyota Tacoma
- I can help you install the Yakima round bars you have on your 2019 Toyota Tacoma but Yakima actually no longer uses the Q Tower racks so the Q clips aren't available anymore and were never tested on your truck. So what you'd need is the # Y53TR for the towers, # Y03536 for the roundbar adapter, and Landing Pad 24 # Y74FR since you already have bars like the # Y00408.
view full answer... - How To Use Yakima Round Crossbars on 2018 Tesla Model S with Panoramic Roof
- I do have an option for you but for the 2018 Tesla Model S you must use the Yakima Skyline Tower part # Y53TR and Landing Pad 22 part # Y00248. Then, in order to use the Round 58" CrossBars for Yakima Roof Rack System part # Y00409 you'll need the Yakima Round Bar Adapters part # Y03536.
The Yakima Timberline Towers are not compatible.
view full answer... - Do Yakima Core Bars fit Thule Tracks on Leer Cap
- A Yakima rack with CoreBars is compatible with the Thule tracks on the Leer cap of your 2016 Toyota Tacoma.
To install the rack, you would need the following parts:
Two of the Landing Pad 1 for Yakima Control Towers # Y00221
SkyLine Towers for Yakima Crossbars # Y53TR
The Yakima CoreBars you need would depend on the width of your Leer cap; your options are Yakima CoreBar Crossbars 50" Long # Y00421
Yakima CoreBar Crossbars 60" Long # Y00422
Yakima CoreBar Crossbars 70" Long
view full answer... - How to Carry a 98-LB Kayak on a 2012 GMC Yukon XL Denali
- For a 2012 GMC Yukon XL Denali, Yakima makes a great roof rack system. I recommend the HD bars, part # Y01156. They are heavy-duty bars capable of handling your kayak. To mount them to your tracks, you will need the SkyLine Towers, part # Y53TR, along with the HD Bar SL Adapter, part # Y03541, and the Landing Pad 20, part # Y00246. The total system can handle 165 pounds, but check your owner's manual to ensure your roof can handle that much.
Since your kayak is so long, using the Malone
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
- Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer... - How to Fit the Whispbar WB-400 Kayak Carrier on a 2016 Subaru Outback Wagon
- We do have some solutions for you to use a J-Style carrier on your 2016 Subaru Outback Wagon, but if your current crossbars don't have a T-Slot then the (discontinued) Whispbar WB-400 J-Style kayak carrier isn't compatible with your current roof rack system.
To use this system with your Outback Wagon you need to upgrade your OEM crossbars to Yakima JetStream or HD crossbars which do use the T-Slots. For a complete roof rack system you need the SkyLine Towers # Y53TR and the Landing
view full answer... - Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500
- You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following:
- Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2)
- SkyLine Towers for Yakima Crossbars # Y53TR
Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then
view full answer... - How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
- There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
view full answer... - What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
- If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221.
For the tracks themselves, they come in 3 different sizes:
- Yakima 42" Tracks for Roof Racks # Y01126
- Yakima 54" Tracks for Roof Racks # Y26RR
- Yakima 60" Tracks for Roof Racks # Y01135
Since most
view full answer... - What Parts Are Needed To Make Low-Profile Bed Rack System For 2022 Ford F-150 w/ RetraxPro Cover
- Looks like you are pretty much there!
The Landing pad 1 # Y00221, Skyline Towers # Y53TR, and 68" Yakima HD crossbars # Y01158 will all work perfectly with the RetraxPro XR rails on your 2022 Ford F-150.
This would be perfect for carrying bike racks with a rack like # TH598004-FB, or a platform like the # Y05045-39 but it would be pretty hard to carry kayaks or canoes with this style of rack as you would have a ton of overhang past the bed which is less than ideal.
For a kayak
view full answer... - Parts Needed to Install Yakima Roof Rack in Channel on Truck Camper Shell
- The Yakima Landing Pad 1 part # Y00221 is the correct fit kit to allow you to install a Yakima roof rack in the channels of your camper shell.
You do have to remove the end caps of the tracks to be able to install the square nuts that slide into the channel and hold the rack in place. You'd need a quantity of 2 of these fit kits though for both bars.
You'll also need:
quantity 4 of the Control Towers # Y8890027
and depending on the length of your cap
quantity 2 Crossbars like:
view full answer... - Recommended Roof Rack And Canoe Carrier For 2009 Ford F-150 With ARE Camper With Yakima Roof Tracks
- We have just what you need to put a rack and canoe carrier on your 2009 F-150 with the ARE camper.
First you will need 2 pairs of the Landing Pad 1 for Yakima Control Towers, part # Y00221.
Then you need the SkyLine Towers for Yakima Crossbars, part # Y53TR.
For crossbars you can take a quick measurement to make sure you get the right length for your camper. For 60-inch I recommend part # Y00422. If you want 70-inch you will need part # Y00423.
I also recommend the Yakima
view full answer... - Recommendation for Installing Yakima Roof Rack on Leer Cap with Thule Tracks
- You can indeed install a Yakima roof rack system on your Leer cap that features the Thule tracks.
You will need to start with two of the Landing Pad 1 # Y00221, which are the pieces that will mount to the tracks to provide an attachment point for the towers. Then from there you will need 4 of the Control Towers # Y8890027. Then it is just a matter of selecting the crossbar length you are wanting. These are available in 48 inch # Y00408, 58 inch # Y00409, 66 inch # Y00410, and 78 inch
view full answer... - Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack Tracks
- Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2.
To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following:
48" Round Bars - # Y00408
58" Round
view full answer... - Yakima Roof Rack that Fits Leer Truck Topper Tracks
- We have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell.
To complete your roof rack setup you will need:
quantity 2 of the Landing Pad 1 # Y00221
quantity 4 of the Control Towers # Y8890027
and depending on the length of your cap
quantity 2 Crossbars like:
48 inch # Y00408
58 inch # Y00409
66 inch # Y00410
78 inch # Y00411
To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
view full answer... - Roof Rack For 2005 Buick Rendezvous That Can be Transferred
- The only roof rack that can be transferred from your 2005 Buick Rendezvous to a different vehicle is one that uses vacuum cups to attach, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B.
Otherwise, roof racks are specific to each vehicle, so if you wanted a custom fit rack, the only option for your '05 Rendezvous is the following from Yakima:
- Yakima JetStream Crossbars # Y00426
- SkyLine Towers # Y53TR
- Landing Pad 1 # Y00221
view full answer... - Dimension of Mounting Hole Spacing of Yakima Landing Pad 1 #Y00221
- I was able to go out to the warehouse and measure the Yakima Landing Pad 1 for you and found that the mounting hole spacing is 3-15/16 inches from center to center.
I have linked a picture and the part to this page for your convenience.
view full answer... - Roof Rack for Camper Shell and Roof of 2020 Chevy Silverado 1500
- You can then use the Yakima roof rack with landing pad 1 part # Y00221, two of the control towers # Y8890027, and the single crossbar # Y8810025.
Then for a single bar rack for the roof of your 2020 Chevy Silverado 1500 you'd want the part # RRVA150B, # RRRLKVAH, and # DK427H and you'd be set.
view full answer... - Is the Mounting Hardware for the Landing Pads for Yakima Control Towers Part # Y00221 Included
- The mounting hardware that is needed to install the Landing Pads for Yakima Control Towers part # Y00221 is included therefore no additional purchase will be necessary. I have attached a photo that shows everything that is included in the kit above for you as well.
view full answer... - Adding Crossbars to an ARE Camper Shell with Tracks
- I believe your ARE camper shell has Yakima tracks installed but it doesn't really matter which brand you have as most of them will accept each others mounting feet. However, Yakima has the most cost effective option for you so I recommend using the landing pads part # Y00221 (2), control tower part # Y8890027 (4), and crossbars part # Y8810025 (2). The round crossbars are cut to fit. This is the most inexpensive option we have for you to add crossbars to your ARE camper shell.
view full answer... - Landing Pads, Control Towers, and Round Crossbars for Yakima Roof Rack Tracks on a Pop Up Camper
- Yes, if you use the Landing Pad 1 # Y00221 you will need to use Control Towers, # Y00214 (discontinued). This is a set of 4 feet so you will need to get 2 sets of the Landing Pads.
Pop up campers, while generally small, can still be wide. The widest Yakima bars are 86 inches, # Y00420. If you need a different length there are also 78 inch bars, # Y00411, 66 inch bars # Y00410, 58 inch bars # Y00409, and 48 inch bars # Y00408.
view full answer... - Yakima Round Bar Complete Roof Rack System With Tracks
- You can piece together a round bar system that is going to be similar to a Yakima roof rack with round bars and a track system. What you will need are the following parts:
- Yakima 54" Tracks for Roof Racks # Y01127
- Yakima Control Tower # Y8890027 (Quantity of 4)
- Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2)
- Round 58" CrossBars for Yakima Roof Rack System # Y00409
OR Round 66" CrossBars for Yakima Roof Rack System # Y00410
This will give you a track-based
view full answer... - Recommended RetraxPro XR Tonneau Cover and Crossbar Kit for a 2022 Ford F-250 Super Duty
- I would be happy to help you find a cross bar system and tonneau cover for your 2022 Ford F-250 with the 6-3/4' bed. There is not a round bar system though but I have two great options for you that will work with a tonneau cover.
The correct RetraxPro XR tonneau you will need for your F-250 is Item # RTT-80383. This cover has the built-in T-slots that let you mount your ladder rack or roof rack crossbars to the side rails.
If you are set on a Yakima system you will want the Yakima
view full answer... - Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
- You are correct, it is the Yakima Landing Pad 1 part # Y00221 that is compatible with the Truxedo Elevate TS rails.
view full answer... - Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks
- I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your ARE camper.
To complete your roof rack setup you will need:
quantity 2 of the Landing Pad 1 # Y00221
quantity 4 of the Control Towers # Y8890027
and depending on the width of your cap
quantity 2 Crossbars like:
48 inch # Y00408
58 inch # Y00409
66 inch # Y00410
78 inch # Y00411
view full answer... - Roof Rack for 2008 Fleetwood Niagara Pop Up Camper with Factory Track System
- I did some research on your 2008 Fleetwood Niagara Pop Up Camper and it appears that most of the major roof rack manufacturers (Thule/Yakima/Rhino-Rack) have systems that will work with the factory tracks you have on the roof of your popup camper. One of the most cost effective options we have for you is from Yakima in their round bar system. This system is composed of the fit kit part # Y00221(2), mounting feet part # Y8890027 (4), and crossbars part # Y8810027 (2). Please keep in mind
view full answer...
Yakima Accessories
Fit to this rack on your 2012 Chevrolet Tahoe
Info for these parts were:
Video Edited:
Zack K
Video Edited:
Dustin K
Written by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Jeffrey L
Video by:
Joshua S
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Alex H
Updated by:
Michael B
Updated by:
Noah M
Installed by:
David F
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ralph C.
11/6/2023
Great had a few Hic-Ups getting the correct set E-Trailer reps were all over it and got me going Great Company to work with