Load up and free space in the back of the truck with RV and camper bike racks that carry 2 bikes. They're easy to install, and finding the best placement for both bikes can take a bit of trial and error. With locks not included, bring your own lock and use simple ties or bungees to keep everything secure on the road.
Yes, as long as the rack is built for trailer use. Some racks aren't designed for use on a travel trailer due to extra movement at the back. Look for racks specified for trailers and that fit a standard 2" hitch receiver. If there's no hitch, some options include a bumper mount hitch that attaches to a 4" - 4-1/2" tall bumper.
Yes. You can invert a compatible bumper-mounted receiver to place it on top of the bumper to allow greater ground clearance. Confirm your bumper height and mounting before drilling. After mounting, test-fit the rack and bikes and check for sufficient clearance during turns and dips.
Often, yes, with the right setup. You can tilt the rack before installing the bike or load on the outside position for easier access. If tailgate or door access matters, choose a tilting version. If your bikes have fenders, be cautious with wheel-mount styles; a frame-mount avoids contacting fenders.
Use extra bungees or ties to stabilize the bikes. You can add a small lock to the hitch pin in place of a cotter pin. If using a 3/16 shackle lock on clamp arms, check that it fully locks—some short shackles can look locked but pull open. One lock on the upper clamp arm can secure both arms. Add rags or pool noodle pieces on contact points to protect frames.
Yes, it can work with a heavy-duty 4" bumper 2" hitch receiver. You don't have to use a bumper-mounted hitch that ships with some racks if you already have a 2" receiver. This also lets you move the same rack to a vehicle with a 2" hitch when not using the camper.
RV Bumper Rack
RV Hitch Rack
RV Ladder Rack
Filters
