Single zone RV air conditioners work with ducted or ductless setups and fit a 14-1/4" x 14-1/4" cutout for straightforward installs. New R32 systems aren't backward compatible with older R410A parts, so plan on the correct air distribution box or a complete system when upgrading.
Yes, there are single-zone rooftop units with a heat pump. You will need a complete system since new R32 units aren't compatible with older components. Choose ducted or ductless based on your RV, and only add a wall thermostat if you want it to run your furnace—other functions are handled by the remote.
Use an air distribution box with a vent you can open and close. When it's closed, it forces more of the air through the ducted system. Verify your RV is ducted before choosing this style. If you want local airflow, open the vent to dump more air into the room.
You'll need a complete new setup because R32 units aren't backward compatible with old R-410A systems. For ducted installs, include the air distribution box. If your RV has a furnace, include the compatible thermostat to control the furnace; you can also run a furnace independently with an existing wall thermostat.
Installation can be straightforward but the unit is close to 80 lbs, so plan help getting it on the roof. Follow torque specs like 40 inch pounds on the retaining bolts to avoid stripping. Set aside several hours if you're new to this, and take time to understand the instructions and abbreviations before tightening everything down.
Yes, single-zone rooftop units commonly use a 14-1/4" x 14-1/4" cutout. That size is standard on RVs for 18,000 Btu replacements. If you're swapping from a pre-2025 Dometic setup, plan to change the air distribution box due to the move to R32 refrigerant. Confirm whether your system is ducted or ductless before ordering parts.
Filters
