Filter Results
$9.06 - $119.16
$22.98 - $85.88
Videos
for Ratchet Straps
Help Articles
for Ratchet Straps
Expert Answers
for Ratchet Straps
Yes, I believe a 10mm bolt will work just fine with the CargoBuckle Ratchet Straps #IMF18800. The bolt provided with the straps is a 3/8" bolt so like 9.5mm. The plastics housing on the back gives a bit of extra space for the bolt so…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...I recommend using a cargo carrier that will have enough clearance as you mentioned you need. One of the nice carriers we offer is the Curt 24 x 60 Cargo Carrier, part #C18151. This carrier has a distance of 9 inches from the center of the hitch pin…
view full answer...The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…
view full answer...Based on the information I could find for the DICO 45264 is was popular on ShoreLand'r trailers. This would require the Idler Hub #AKIHUB-545-35-G-EZ-K with the Grease Seal #168255TB used instead of the seal included with the hub. We…
view full answer...It may be possible to upgrade the 4.80-12 tires on your Karavan trailer. The main factor we need to consider is the clearance between the tire and the fender, as well as the clearance between the inside of the tire and the trailer frame. Our rule…
view full answer...The Roadmaster D-Ring adapters like the part #RM-035-1 can be used with the Demco tow bars.
view full answer...Thanks for reaching out, Sisco! The Tow-Rax Aluminum Storage Cabinet w/ Folding Tray #TWSP30CSA doesn't have a specific mounting kit since enclosed trailers vary greatly by construction. You'll need to either anchor it to…
view full answer...We have a video review of the CargoBuckle G3 Retractable, Ratcheting Tie-Down Straps, #IMF18800, and I have linked it for you. Installation is straight forward. The straps have a mounting hole on the base and include nuts, bolts, and washers. All…
view full answer...I went out to the warehouse to measure the CargoBuckle G3 #IMF18804 that you referenced and found that at the longest and widest points the base measured 9-7/8" x 6-9/16". The base measures about 4-1/2" deep so…
view full answer...I recommend using the 601 Flooring Adhesive in a 1 Gallon #TS76FR or 4 Gallon #TS26FR depending on your application. The 601 does not have the pressure sensitive requirements of the 801, 1 Gallon #TS86FR and 4 Gallon #TS58FR adhesives.
view full answer...Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford…
view full answer...Videos
for Ratchet Straps
Help Articles
for Ratchet Straps
Expert Answers
for Ratchet Straps
Yes, I believe a 10mm bolt will work just fine with the CargoBuckle Ratchet Straps #IMF18800. The bolt provided with the straps is a 3/8" bolt so like 9.5mm. The plastics housing on the back gives a bit of extra space for the…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...I recommend using a cargo carrier that will have enough clearance as you mentioned you need. One of the nice carriers we offer is the Curt 24 x 60 Cargo Carrier, part #C18151. This carrier has a distance of 9 inches from the center of the hitch pin…
view full answer...The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…
view full answer...Based on the information I could find for the DICO 45264 is was popular on ShoreLand'r trailers. This would require the Idler Hub #AKIHUB-545-35-G-EZ-K with the Grease Seal #168255TB used instead of the seal included with the hub.…
view full answer...It may be possible to upgrade the 4.80-12 tires on your Karavan trailer. The main factor we need to consider is the clearance between the tire and the fender, as well as the clearance between the inside of the tire and the trailer frame. Our rule…
view full answer...The Roadmaster D-Ring adapters like the part #RM-035-1 can be used with the Demco tow bars.
view full answer...Thanks for reaching out, Sisco! The Tow-Rax Aluminum Storage Cabinet w/ Folding Tray #TWSP30CSA doesn't have a specific mounting kit since enclosed trailers vary greatly by construction. You'll need to either anchor it…
view full answer...We have a video review of the CargoBuckle G3 Retractable, Ratcheting Tie-Down Straps, #IMF18800, and I have linked it for you. Installation is straight forward. The straps have a mounting hole on the base and include nuts, bolts, and washers. All…
view full answer...I went out to the warehouse to measure the CargoBuckle G3 #IMF18804 that you referenced and found that at the longest and widest points the base measured 9-7/8" x 6-9/16". The base measures about…
view full answer...I recommend using the 601 Flooring Adhesive in a 1 Gallon #TS76FR or 4 Gallon #TS26FR depending on your application. The 601 does not have the pressure sensitive requirements of the 801, 1 Gallon #TS86FR and 4 Gallon #TS58FR adhesives.
view full answer...Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford…
view full answer...