Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
Hey Craig! Is this a Lippert Ground Control system? Is the part actually 304136? I asked Lippert and they said they don't have anything under 304135. If it is the 304136 the correct replacement is the Replacement Control Module for Lippert Ground…
Hey Jerry, does the LED still light up on the front of the Mighty Cord SurgeMinder Surge Protector and Circuit Tester #SU39SR? If it was actually overloaded it would have damaged the internals of it and it wouldn't work as a surge protector any…
Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…
Hey Scott. The Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump like item #FR97TQ in black or item #FR67TQ in white are only available in 18K btu capacities. The Chill Cube uses variable-speed technology, which allows it to reduce…
Hey Steve, yes the Dexter Nev-R-Adjust Brake Assembly set part #23-458-459 is the correct set for your Airstream based on the part numbers you mentioned. Also the hub/drum part #8-388-80UC3 that you referenced as well would be correct for your…
Hey Ken, welcome back! The Chill Cube #FR24TQ is just the rooftop unit. The #FR67TQ is the rooftop unit with the air distribution box (ADB) and the remote. This is everything you need for a complete installation. The #FR59TQ is the AC unit with the…
Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA
RV Interior Lights Puck Light for Recessed Mount
Recessed mount puck light designs make ceiling swaps straightforward, sliding into an existing cutout. They can be brighter than the originals and install simply as replacements. Measure your opening, depth, and mounting pattern to confirm fit, and note spring-clip retainers can be tight if you can't access the space above.
Installation is generally simple for recessed puck lights. Have mounting screws on hand in case they aren't included, and check that the lens and back cover are seated before installing. Spring or tension clips can be tight—support or compress them carefully to avoid damaging the cut hole, especially if you can't reach the space above.
Yes, you can replace 12V halogen recessed puck lights with 12V LED puck lights. Verify the cutout and overall size match. LED options can be brighter than the originals and may use less power, like 3W in place of 10W halogen in some setups. Confirm wire polarity during hookup so it lights up on the first try.
Remove the old recessed puck light and measure before ordering. Check the ceiling cutout, overall diameter, and the depth or height so the body won't bottom out. Match the 12V wiring and note mounting style—screws or spring clips. If it uses spring clips, confirm you have access above the fixture or a way to compress the clips during install.
Pick the color temperature that suits your space. If you prefer a warmer look, choose a lower Kelvin lighting. Many replacements are described as brighter than the originals, so match brightness to the room size and task. Check the lens style as well, since a different lens can change how the light spreads.
Filters
