Hey Bruce, thanks for reaching out. Yes, the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e44SR will absolutely be adequate for the 5,200 lb axles on your 2023 Grand Design 2670mk. As long as the original springs were also 25-1/4" long,…
Hey Keith, I would recommend the Kenda Karrier KR35 part #KE34TJ as it will cover everything you are looking for including having a nicer looking aluminum wheel. This is a high quality tire with a Load Range of D and a higher speed rating of N that…
Hello William, I think you already found it! We don't have schematics for every camper showing exactly which components were installed from the factory. I was able to find an excellent YouTube video where they gave a tour of the Coachmen Pixel…
To replace your Dometic B59516.71C0 Brisk Air, you will want either the Advent Air RV Air Conditioner item #ACDOM150 in white or item #ACDOM150B in black. These are directly compatible with your current Dometic setup so it will be a plug and play…
Hi Kyler! We definitely have center caps and lug nuts that you can use, but the Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2 #KE34TJ does not include them. With that said, I recommend the…
Hello George, In order to get a 7 way on the back of your 2024 Subaru Crosstrek Wilderness, you will need to start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118467. The #118467 will get the 4 flat on the back, but then…
The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K are rated for 5,000 lbs break strength and will work just fine with your application. The 3/4 inch plywood floor is very strong and with the…
Generators do not typically have a 12 volt power converter, so I recommend using the Battery Charger and Maintainer #CTEK56353 and splicing the connector that would go to the battery terminals into a 7-way connector like #30717. You will connect the…
Yes, the Bulldog Powered Drive Trailer Jack - Black #BD500199 can be wired to either a battery or to the 7-way. If you wire it to the battery you'll be able to operate the jack any time, as long as the battery has a 12v charge. If you wire it to…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
No, it will not. The Smart LED Light Strip item #DIA86QR is a 32' long single strip. It has connectors on both ends so it can be connected in series but it won't do what you're asking. We also have it in a shorter 16' length item…
Hey Dale, thanks for reaching out. For your 2010 Toyota Tundra with the factory tow package, a proportional controller is definitely the way to go for smooth braking on a 2-axle trailer, and a really clean option is the Redarc Tow-Pro Liberty…
Hey Bruce, thanks for reaching out. Yes, the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e44SR will absolutely be adequate for the 5,200 lb axles on your 2023 Grand Design 2670mk. As long as the original springs were also 25-1/4" long,…
Hey Keith, I would recommend the Kenda Karrier KR35 part #KE34TJ as it will cover everything you are looking for including having a nicer looking aluminum wheel. This is a high quality tire with a Load Range of D and a higher speed rating of N that…
Hello William, I think you already found it! We don't have schematics for every camper showing exactly which components were installed from the factory. I was able to find an excellent YouTube video where they gave a tour of the Coachmen Pixel…
To replace your Dometic B59516.71C0 Brisk Air, you will want either the Advent Air RV Air Conditioner item #ACDOM150 in white or item #ACDOM150B in black. These are directly compatible with your current Dometic setup so it will be a plug and play…
Hi Kyler! We definitely have center caps and lug nuts that you can use, but the Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2 #KE34TJ does not include them. With that said, I recommend the…
Hello George, In order to get a 7 way on the back of your 2024 Subaru Crosstrek Wilderness, you will need to start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118467. The #118467 will get the 4 flat on the back, but then…
The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K are rated for 5,000 lbs break strength and will work just fine with your application. The 3/4 inch plywood floor is very strong and with the…
Generators do not typically have a 12 volt power converter, so I recommend using the Battery Charger and Maintainer #CTEK56353 and splicing the connector that would go to the battery terminals into a 7-way connector like #30717. You will connect the…
Yes, the Bulldog Powered Drive Trailer Jack - Black #BD500199 can be wired to either a battery or to the 7-way. If you wire it to the battery you'll be able to operate the jack any time, as long as the battery has a 12v charge. If you wire it to…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
No, it will not. The Smart LED Light Strip item #DIA86QR is a 32' long single strip. It has connectors on both ends so it can be connected in series but it won't do what you're asking. We also have it in a shorter 16' length item…
Hey Dale, thanks for reaching out. For your 2010 Toyota Tundra with the factory tow package, a proportional controller is definitely the way to go for smooth braking on a 2-axle trailer, and a really clean option is the Redarc Tow-Pro Liberty…
Rigid LED strip lights offer a robust and sleek lighting solution for various applications. Perfect for automotive, trailer, and home use, these lights provide bright, efficient illumination. Their rigid design ensures durability and easy installation, making them a favorite for enthusiasts looking to upgrade their lighting setup.
Rigid LED strip lights are known for their durability and ease of installation. They provide a clean, low-profile look, making them ideal for automotive grills or under-cabinet lighting. Their robust design ensures they stay in place and offer consistent, bright illumination.
Rigid LED strip lights offer a more stable and secure installation compared to flexible strips. They are less prone to sagging and are perfect for straight-line applications. While flexible strips can bend around corners, rigid strips excel in providing a sleek, professional finish.
Yes, many rigid LED strip lights are designed for outdoor use, offering weather-resistant features. They are perfect for exterior vehicle lighting or outdoor trailers, providing bright, reliable illumination even in challenging conditions.
Ensure a clean surface for mounting and use the appropriate brackets or adhesive for secure installation. Protect wiring from potential damage and consider the power source, especially for automotive or trailer applications, to ensure optimal performance.
Absolutely! Rigid LED strip lights are an excellent replacement for traditional incandescent bulbs. They offer brighter, more efficient lighting and are perfect for applications like kitchen hoods or trailer interiors, where heat and energy efficiency are concerns.
Filters
