12" Long. Interior cove lighting strip illuminates a trailer's interior. Great White series features ultra bright white diodes. Molded seal resists dust, moisture, and vapor. Surface screw mount to trailer wall or ceiling. 2-Wire design.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna take a look at the Peterson 12 inch long Great White LED Trailer interior Cove Light. Now this interior cove lighting strip will provide a nice bright light to illuminate an interior space. It is perfect for enclosed trailers, it does use molded ceiling to help resist dust, moisture, and vapor. It does have six white LEDs on it, and it is compatible with 12 volt and 24 volt systems. It is a surface mount design, you'd mount it to the trailer wall or the ceiling. It can be mounted either horizontally or vertically.
Also the shape of it allows it to fit into corners.Now the mounting hardware to install this is not included. If you notice it is a two wire design, it includes the white ground wire, the black power wire, and the lead length on those wires is about five inches. This part is made in the USA. The light out put on this is 400 lumens, it does have an IP rating of IP 67. Last thing I wanna do is give you the dimensions on this, and then we're gonna hook it up to some power to show you how bright it is.
Overall length, from the very end of the mounting bracket to the other end is right at 13 and 11/16ths. The width on it, and we're gonna do two widths. We're gonna measure the end, which is the widest part. That's gonna be right at one and 3/4 inches, then the width of just the light itself is one inch.Now what we're gonna do is hook it up to some power. Then I'll go ahead and turn off the overhead light so you can see how bright it is.
Let's hook up our white wire, hook up our power wire. I'll go ahead and turn on our 12 volt power, and there you can see with the lights on how bright it is. What I'm gonna do now is we're gonna turn off the overhead lights. There you can see for six LEDs it gives off a pretty bright light. Again it can be mounted either way.
Go back and turn on our overhead lights. Turn off our power. But that should do it for the review on the Peterson 12 inch long Great White LED Trailer interior Cove Light.
Average Customer Rating: 4.9 out of 5 stars (62 Customer Reviews)
12" Long. Interior cove lighting strip illuminates a trailer's interior. Great White series features ultra bright white diodes. Molded seal resists dust, moisture, and vapor. Surface screw mount to trailer wall or ceiling. 2-Wire design.Ordered these to add as lights inside my Decked truck bed cargo system. Work great. Note: To wire this up for a Decked cargo box inside light, you can either do a waterproof toggle switch, or go with a magnetic switch like you would use for an alarm system. I did the latter. You can tap into your bed lighting or to a constant 12vdc at the trailer harness. The magnet switches are set so that the lights turn on when I pull a drawer open, and off when I shut it. Attached some photos to show what they look like
The light itself is great! It would work better if there was a deeper recess on the bottom where it mounts to the trailer. This would help conceal the wiring and extend the light toward the rear of the trailer to better illuminate the license plate.
Well built, easy installation. Great people to do biz with
Reordered after breaking on install. It wasn’t the products fault. Someone shut the trailer door on it just prior to final install and broke the lens. Light still works! Quality product!
Have actually used used these in different setups. 2 enclosed trailers, a 10' long and 22 ' long. Also used 2 for pickup truck bed lighting mounted under the rails of a tonneau cover.
they have worked very well
Used to replace corroded incandescent back-up lights on trailer, these work great, easy to wire in, great illumination.
This light was easy to mount and connect. Add a great amount of light
This was a great replacement for the original lic plate light. I did have to drill one new hole because the new light base was a tad wider than the original base. The wiring was very simple: hot and ground and it worked like a champ.
Excellent product and I will buy it again for my next trailer.
Worked great as a replacement light for my ARE commercial truck topper!
Getting ready to put this 2nd set into my trailer. Tied them right into the cheap ceiling lights and really brightened it up inside.
Very good bright light. Running for a year now and no issues.
Good product, looks good and works well ..
LEDs nice and bright easy to view way better than the traditional incandescent bulbs that were replaced
Excellent product, much better than the plastic one I replaced. Looks good on my trailer.
Nice light. Easy website to navigate. Quick and easy to track shipping.
Just received my order in timely manner, can wait to get them installed! Thank you etrailer
Working great, 1 year later. Perfect fit on my motorhome.
These lights are so nice I just ordered two more to complement the inside of my trailer
Installed easily and works well
Worked as expected-though could be brighter - no issues as of now.
Fit and finish were good and light is working as it should.
Fast delivery. Replaced the plastic factory broken one. Holes lined up perfectly.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.