1. Home
2. RV & Camper
3. Camping Kitchen
4. Cookwarex

Yes, it will. The quick connect line and fittings on the Cadac 2 Cook 3 Pro Deluxe Camping Stove item #FR96EJ doesn't have it's own regulator so you'll be good. It includes three adapters 1/4", 1/8", and #600 (1"-20) so if…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Draw Tite hitch part #75601 that you referenced does come with a bracket welded to the crosstube which is designed for trailer wiring to attach to. So what you could do is also get the 7-way/4-way part #30955 which would plug into the round…

No, I am sorry. The MORryde Camping Kitchens like item #MR73QR are all the same size because they're designed for Jeeps. It's collapsed dimensions are 26-9/16" long x 17-13/16" wide x 7-9/16" tall but the tray extends out a…

Hey Ty, what size hitch do you have and how much of an extension do you need? The Curt extension part #C45048 that you referenced fits a 2-1/2 inch hitch and provides a 24 to 36 inch extension.

When determine if you can fully open swing-out doors on your 2022 ProMaster 3500 with the Yakima EXO #Y34ZR, it really depends on how far your doors swing when in the open position. While the 90-degree swing has not been tested spcificially on a 2022…

Good morning, Don. The 3/4" wide butyl tape is exactly what we recommend for installing a roof vent such as the MaxxFan #MA00-07000K. We actually sell a roof vent install kit part #344270KITW that comes with sealant, screws and a 30' roll of…

The flow through sensors #TM66FR included in the TireMinder A1AS TPMS for RVs and Trailers w Signal Booster #TM86FR can be used on higher quality rubber, steel, chrome, or nickel valve stems that are rated. Lower quality rubber valve stems can bend…

Hey great question, Bill. When installing the #65050 hitch it is normal to leave the handle nut right where it is, hanging thru the hole in the frame. You can trim off the handle with a grinder or something if you want to, or you can just bend it up…

Patrick, a green coffee pot no, unfortunately. We do have the GSI Outdoors Camping Coffee Percolator #GSI28MV which has a 6 cup capacity but is stainless steel, or, we have the GSI Outdoors Camping Coffee Percolator #37325254 which is green, but has…

Hey Chaz, yes the Reese ball mount part #RP82AR that you referenced can be used in the rise position. The torque rating for the ball's nut will be based on the hitch ball that you use and not the ball mount.

Thank you for the photo of your set up, and while we do have an option for a high-quality grill that will allow you to cook outside your RV, there isn't a grill that will fit in the exact mounting arm you have. So the best option we can offer is…

Yes, it will. The quick connect line and fittings on the Cadac 2 Cook 3 Pro Deluxe Camping Stove item #FR96EJ doesn't have it's own regulator so you'll be good. It includes three adapters 1/4", 1/8", and #600 (1"-20) so if…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Draw Tite hitch part #75601 that you referenced does come with a bracket welded to the crosstube which is designed for trailer wiring to attach to. So what you could do is also get the 7-way/4-way part #30955 which would plug into the round…

No, I am sorry. The MORryde Camping Kitchens like item #MR73QR are all the same size because they're designed for Jeeps. It's collapsed dimensions are 26-9/16" long x 17-13/16" wide x 7-9/16" tall but the tray extends out a…

Hey Ty, what size hitch do you have and how much of an extension do you need? The Curt extension part #C45048 that you referenced fits a 2-1/2 inch hitch and provides a 24 to 36 inch extension.

When determine if you can fully open swing-out doors on your 2022 ProMaster 3500 with the Yakima EXO #Y34ZR, it really depends on how far your doors swing when in the open position. While the 90-degree swing has not been tested spcificially on a 2022…

Good morning, Don. The 3/4" wide butyl tape is exactly what we recommend for installing a roof vent such as the MaxxFan #MA00-07000K. We actually sell a roof vent install kit part #344270KITW that comes with sealant, screws and a 30' roll of…

The flow through sensors #TM66FR included in the TireMinder A1AS TPMS for RVs and Trailers w Signal Booster #TM86FR can be used on higher quality rubber, steel, chrome, or nickel valve stems that are rated. Lower quality rubber valve stems can bend…

Hey great question, Bill. When installing the #65050 hitch it is normal to leave the handle nut right where it is, hanging thru the hole in the frame. You can trim off the handle with a grinder or something if you want to, or you can just bend it up…

Patrick, a green coffee pot no, unfortunately. We do have the GSI Outdoors Camping Coffee Percolator #GSI28MV which has a 6 cup capacity but is stainless steel, or, we have the GSI Outdoors Camping Coffee Percolator #37325254 which is green, but has…

Hey Chaz, yes the Reese ball mount part #RP82AR that you referenced can be used in the rise position. The torque rating for the ball's nut will be based on the hitch ball that you use and not the ball mount.

Thank you for the photo of your set up, and while we do have an option for a high-quality grill that will allow you to cook outside your RV, there isn't a grill that will fit in the exact mounting arm you have. So the best option we can offer is…