Cargo Slide Tray that will Work in a 44 x 60 Storage area.

Question

Question:

I have 2000 Newmar Durchstar 38ft diesel pusher. I am curious if this slide tray is the complete unit to install a slide tray in my baggage compartment. I need a slide tray that is no more than 44 inches wide and approx 60 inches deep.

asked by: Roger H

0

Expert Reply:

I reached out to Lippert to confirm and the Kwikee SuperSlide Tray Assembly with Trim Kit for RV Cargo Compartment part # LC370769 is adjustable as far as width goes. It is up to you to choose how wide you want the tray to be. Some will choose to have one large tray where as others would want separate trays.

With your storage area being 60" I prefer the part # LC370769 which is the 54" because it will give you a little space between the door and the tray. If your prefer to maximize the tray size the Kwikee SuperSlide II Tray Assembly Kit for RV Cargo Compartment part # LC370787 is 60" in depth.

expert reply by: Randy B

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 7

Hey Mark, thanks for writing in. I can definitely help you find the right gooseneck pin box for your Alliance, but I will tell you that typically, the height of the goosebox is very similar to the height of the pin box and 5th wheel hitch it is…

view full answer...

Answer 8

Hey Charles! The Curt TruTrack 2P Trunnion Weight Distribution System w/ Sway Control - 7-Hole Shank - 12K GTW #C75RJ will work great with your 2026 F-250 to pull a 25-30 ft RV. There isn't a kit with a 2.5" shank, but you can add Curt…

view full answer...

Answer 9

Hey Ken! Instead of worrying about fitment and a potential return I can give you some measurements so you can figure it out before ordering. The standard shank on the B&W Continuum Weight Distribution System #BW28FR is 11-3/8" from the…

view full answer...

Answer 10

Hey Chase! We certainly have a lot of PullRite capture plates so that you can use the SuperGlide 5th wheel hitch with aftermarket pin boxes. Can you verify what type of cushioned pin box you have on the trailer? If you aren't sure, feel free to…

view full answer...

Answer 11

Hey Rick, thanks for reaching out. The Mad Ramps Golf Cart Risers included with the #MR89RV kit are very straightforward to install. They bolt directly onto the existing ramp surfaces of your Mad Ramps system using the included hardware. Here are the…

view full answer...

Answer 12

Hi Fredrick, The Curt Custom 5th Wheel Kit for Ford part #C16424-104 is not compatible for your 2026 Ford F-250, so it wouldn't work with your truck's frame. For your 2026 Ford F-250 with a 6 3/4" truck bed without a factory OEM puck…

view full answer...

Cargo Slide Tray that will Work in a 44 x 60 Storage area.

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching