If you have 3,500 lb axles, then it is rare that you will have bearings that are anything other than the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal #BK2-100, but I do recommend pulling your hub and checking the bearing…
Hello Jay, I’m curious what panel you’re planning to use. How many panels will you be running, and what is the total wattage? I want to make sure the controller I recommended is properly sized for your setup. Right now, your camper has the Go Power…
The Fulton High-Performance 2-Speed Trailer Winch - Rope or Strap - 2,600 lbs #F142412 does not have the quick disconnect feature. You would need to remove the handle using a wrench or socket. The 2 speeds have a lever change instead of the handle…
Hey John! For a 2 speed winch that will make cranking up your pontoon easier I recommend the Dutton-Lainson Hand Winch #DL14825. This winch has high carbon steel gears and permanently lubricated bearings with a 2,500 lb capacity so it won't have…
That's definitely not a good situation. If you raise the bike rack up a bit will that give you the clearance you're needing? Adding another extender to your Roadmaster Adapter #RM-048-6 is never a good idea because it adds more potential fail…
We know that the Fulton Fender part #F008583 that you referenced will easily fit on a Shoreland'r trailer that has tandem axles but it is not a direct bolt-on application. Some small modifications will need to be made. Check out the review I…
I do have a recommendation for you as the Access LED Truck Bed Lighting System #A70380 is not designed to be connected to other light strips. The Optronics Flexible LED Light Strip #UCL90CB is a 17' roll with the ability to be cut every…
I have another option for you, but the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 3,500 lbs #TASR35HDS04 you were looking at actually uses 5200lb hub and drum assemblies and is not available with the 5 on…
Although the #TASR35HDS04 Timbren Axle-Less suspension you'd looked at has a 3500 lb capacity but is compatible with hubs that would have a 5200-7000 lb capacity, depending on which bearing set is used. We don't offer an idler hub compatible…
You are just fine; it will work with the prewiring in your 2019 Lance 855. While correct that a 2.0 will not work with a 1.0 system this is making reference to intermixing the cameras and monitors. The prewire plate on the back of the trailer is…
The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…
Your trailer must have free backing brakes if you have never used the surge brake actuating coupler reverse lockout. If you did not have free backing brakes, your brakes would most likely brake even if they didn't lock up when you back up because…
Boat Tables Parts or Accessories
Filters
