Inno Quick Base Systems Overview Video

Hey Perry, so due to the door style that is at the rear of a 2023 Mercedes Sprinter the Inno tilt cargo carrier part #IN94MR wouldn't allow the door to open as it would sit up too tall even folded down but I do have a similar solution that would…

The Replacement Pod for Rola Enclosed Cargo Carriers #10188 for the Rola Swinging Enclosed Cargo Carrier, can hold a total of 13.5 cubic feet of gear. has an internal dimensions of: -47" long, and 21" wide at the bottom of the pod. -At its…

I went to our warehouse to pull the Curt combo bar #E-9 to provide some measurements. And yes, the Curt combo bar #E-9 will have an internal dimension of 2-inches x 2-inches and outer dimension of the shank is 2-1/2 inches x 2-1/2 inches. The forged…

Hi Steve, Yes, the Inno Cargo Carrier with Removable Cargo Box #IN94MR is designed to protect the items inside from water and other dirt/debris. This cargo box is made with ABS plastic which is impact resistant and won't allow water to pass…

Hi Mark; I verified directly with Inno the total combined overall weight is 60-1/2 lbs of the 39x25 Inno Cargo Carrier with Removable Cargo Box for 2" Hitch #IN94MR. The cargo box alone weighs 25 lbs while the base weighs 35-1/2 lbs.

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

I tried to find the width of the factory roof rack on your 2020 Toyota Highlander but was unable to do so. You will need to measure your crossbar width to verify fitment. The Malone Cargo16 Rooftop Cargo Box #MPG902 is 27-7/8" wide and the…

Hello Gabe. According to Inno, the Replacement Quick Base for Inno Cargo Carrier for 2" Hitches #IN92RR is 39-1/2" long x 25-5/8" wide x 5" tall. I made a diagram to help illustrate. Hope this helps!

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame #24792, feature a square tube design, while the Class III hitches like the…

I do have some of the components that you will need to set your trailer up for a shore power circuit but if install cost is all you are looking for then you would be best off talking with a qualified service center as this is not something we partake…

Yes, the 2 wires that you found behind the tail light of the Pod for Rola Enclosed Cargo Carriers #10188 is for a license plate light if required. I would recommend using the Mini LED Trailer License Plate Light #OPT77FR so that you can run the…

Exhaust melting cargo on a cargo carrier isn't a super common problem, but we are aware that it does happen on occasion. Especially if the cargo carrier is at the same height as the exhaust, relatively close to it, and/or the material in the…