Sturdy, vacuum cup-mounted table is great for creating a workspace on your boat. Mounts quickly to your transom or other non-porous surface. Back of table has open corners and hangs over your boat so that fish entrails can be quickly disposed.
Features:
Specs:
This portable table creates a workspace on your boat. It's perfect for fileting fish or cutting bait. You can mount it to your transom, cooler, boat table, or any other horizontal, non-porous surface. It installs and removes in seconds.
The back corners of the table have openings that make cleaning the table easy. If the table is mounted on your transom you can use your filet knife to slide your fish entrails through the openings, leaving your boat clean.
This vacuum cup table is quick and easy to mount. To install the table make sure the mounting surface is clean and place the cups on your boat then press the pump several times until the orange band disappears. To break the seal and remove the table from your boat simply pull the T-shaped tab up and towards the center of the cup. As suction decreases over time the plunger will extend from the cup. When the orange indicator band shows simply re-pump the plunger.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the SeaSucker Marine Vacuum Mount Medium 12-Inch by 22-Inch Cutting Table. This will give yourself a little extra workspace on your boat by bringing along this vacuum mount cutting table. This will easily mount to the top of a gunnel to give you room to cut bait or filet your catch, has the open corners right here, which allows for easy disposal of waste overboard, does have two knife slots right down here, provides convenient and safe storage, and it also has handles on the sides, working double as a serving table, can be mounted flush against the inside of the transom on the boat trip out for a nice low profile storage. Just attach it this way for storage. It does have this 6-inch diameter vacuum mount. The pull rating on that vacuum is 210 pounds. The construction of this is 1/2-inch thick, white starboard construction.
It is made in the USA. Also includes this waterproof lubricant tube right here. What that's used for is the plunger right here on your vacuum mount. The plunger's what you would push to activate your vacuum mount. Over time, you might get dirt or grime in there.
What you need to do is you can pop that plunger out, clean out the gasket, and apply some of the lubricant in there and then put your plunger back in. It'll work just good as new. This does have a work surface area of 12 inches by 22 inches. What I do want to demonstrate is how the vacuum mount works. What we're going to do is if we're going to store it on the wall .. It does have this nice hard plastic cover plate that protects the vacuum mount from any damage.
If we just swing this around and put it to the back wall and then just apply some pressure to it, and then what you'll do is just pump your plunger right here, and you just keep pumping that plunger to apply vacuum. The way you know you've applied enough is that orange ring that you see on there, it will eventually disappear, just like that. Once that orange is all gone, you can see how it's secure onto the wall for storage. Same way when you attach it to the top on your boat. You can apply it with the vacuum mount. To release it, there's a tab here and one on the other side.
All you have to do is pull on that tab. Let me get under here. If you push on that tab, it'll release the suction, and you can see you can remove it right off. It's very easy to install and very easy to remove. That should do it for the review on the SeaSucker Marine Vacuum Mount Medium 12-Inch by 22-Inch Cutting Table.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Sturdy, vacuum cup-mounted table is great for creating a workspace on your boat. Mounts quickly to your transom or other non-porous surface. Back of table has open corners and hangs over your boat so that fish entrails can be quickly disposed.Carol,
I am always satisfied with my orders from etrailer. The hitch arrived today and I’m waiting for the cutting board.
Definitely 5 Star Service
Best Regards,
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.