The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…
Your trailer must have free backing brakes if you have never used the surge brake actuating coupler reverse lockout. If you did not have free backing brakes, your brakes would most likely brake even if they didn't lock up when you back up because…
I have another option for you, but the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 3,500 lbs #TASR35HDS04 you were looking at actually uses 5200lb hub and drum assemblies and is not available with the 5 on…
Although the #TASR35HDS04 Timbren Axle-Less suspension you'd looked at has a 3500 lb capacity but is compatible with hubs that would have a 5200-7000 lb capacity, depending on which bearing set is used. We don't offer an idler hub compatible…
You are just fine; it will work with the prewiring in your 2019 Lance 855. While correct that a 2.0 will not work with a 1.0 system this is making reference to intermixing the cameras and monitors. The prewire plate on the back of the trailer is…
I do have a recommendation for you as the Access LED Truck Bed Lighting System #A70380 is not designed to be connected to other light strips. The Optronics Flexible LED Light Strip #UCL90CB is a 17' roll with the ability to be cut every…
The Curt Custom 5th Wheel Installation Kit 16424-104 is designed to fit the 2011 to 2016 Ford F-250, F-350, and F-450 Super Duty trucks. I checked with Curt and, unfortunately, they currently do not have a kit available to fit the 5-1/2 foot option…
The EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle. The proper replacements are available as part #23-450-451, which includes the left and right self adjusting brake…
First you will want to check the airflow area between the freezer and refrigerator on your Everchill refrigerator is not blocked. The knob inside the freezer is designed to increase or decrease the amount of airflow which is allowed into the…
Your brake lights and turn signals for each side are on one circuit. The left side turn signal and brake light is generally the yellow wire going into your trailer connector. The first thing to do is check the fuses on your tow vehicle. Next, inspect…
To tow with your 2011 BMW X5 you are correct that you will need a trailer hitch receiver, a 4-way flat, 7-way and brake controller. Let's start with the trailer hitch and for that the best option for your 2011 X5 is the Draw-Tite Trailer Hitch…
The correct grease seal that you would need is Grease Seals 10-36 pair, part #RG06-070. If you wanted a kit that had a replacement 25580 and 67048 bearings plus the 10-36 seal you would want a Bearing Kit, LM67048/25580 Bearings, 10-36 Seal, part…
Easy place to shop. Fast delivery and great products. Very happy with my purchase.
Ed
Boynton Beach, FL
Enhance Your Boating Experience with Surface Mount Boat Tables
Surface mount boat tables offer a versatile and stable solution for your boating needs. Perfect for hosting meals or cocktail hours, these tables can be easily installed and provide a sturdy platform for drinks and snacks, even in motion. Enjoy the convenience and functionality of a well-designed table on your boat.
Surface mount tables are designed to be stable, but some may require additional shimming for a snug fit. They are generally sturdy enough to hold drinks and snacks, making them ideal for social gatherings on the water. Ensuring a proper fit with the base can enhance stability.
Cupholders in boat tables add convenience and safety by securely holding drinks, preventing spills during movement. They enhance the table's functionality, making it perfect for meals and cocktail hours, allowing you to enjoy your time on the water without worrying about tipping drinks.
Yes, surface mount tables offer versatility and can be installed in various areas of the boat, such as the bow or stern. This flexibility allows you to maximize space and accommodate more guests, enhancing your boating experience by providing multiple social areas.
Installing a surface mount boat table is generally straightforward. The table fits onto a base, and ensuring a snug fit is key to stability. Some may require minor adjustments, like shimming, to achieve the perfect fit, but overall, the process is user-friendly and quick.
Consider the table's stability, size, and features like cupholders. Ensure it fits well with your boat's layout and meets your social needs. A sturdy, well-fitting table enhances your boating experience, providing a reliable surface for meals and gatherings.
Filters
