If you have 3,500 lb axles, then it is rare that you will have bearings that are anything other than the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal #BK2-100, but I do recommend pulling your hub and checking the bearing…
Hello Jay, I’m curious what panel you’re planning to use. How many panels will you be running, and what is the total wattage? I want to make sure the controller I recommended is properly sized for your setup. Right now, your camper has the Go Power…
We know that the Fulton Fender part #F008583 that you referenced will easily fit on a Shoreland'r trailer that has tandem axles but it is not a direct bolt-on application. Some small modifications will need to be made. Check out the review I…
I do have a recommendation for you as the Access LED Truck Bed Lighting System #A70380 is not designed to be connected to other light strips. The Optronics Flexible LED Light Strip #UCL90CB is a 17' roll with the ability to be cut every…
I have another option for you, but the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 3,500 lbs #TASR35HDS04 you were looking at actually uses 5200lb hub and drum assemblies and is not available with the 5 on…
Although the #TASR35HDS04 Timbren Axle-Less suspension you'd looked at has a 3500 lb capacity but is compatible with hubs that would have a 5200-7000 lb capacity, depending on which bearing set is used. We don't offer an idler hub compatible…
The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…
Your trailer must have free backing brakes if you have never used the surge brake actuating coupler reverse lockout. If you did not have free backing brakes, your brakes would most likely brake even if they didn't lock up when you back up because…
You are just fine; it will work with the prewiring in your 2019 Lance 855. While correct that a 2.0 will not work with a 1.0 system this is making reference to intermixing the cameras and monitors. The prewire plate on the back of the trailer is…
First you will want to check the airflow area between the freezer and refrigerator on your Everchill refrigerator is not blocked. The knob inside the freezer is designed to increase or decrease the amount of airflow which is allowed into the…
The Curt Custom 5th Wheel Installation Kit 16424-104 is designed to fit the 2011 to 2016 Ford F-250, F-350, and F-450 Super Duty trucks. I checked with Curt and, unfortunately, they currently do not have a kit available to fit the 5-1/2 foot option…
The EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle. The proper replacements are available as part #23-450-451, which includes the left and right self adjusting brake…
Filters
