Bolt-On Swivel Jack For Leveling Tear Trailer

Updated 04/08/2024 | Published 04/05/2024

Products Featured in This Question

Square Pipe Mount Swivel Jack w Footplate - Drop Leg - Weld On - Sidewind - 28-1/2" Lift - 7K

(178)

$141.90

Ark XO Drop Down Corner RV Stabilizer Jacks - 6" Lift - Black - Qty 2

(163)

$299.00

Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 1.6K

(427)

$152.10

Question:

Hi, Im wondering if you have a product like TJP-7002S-B that is bolt on? The intended use is for installation at the rear of a tear trailer for leveling. Thank you in advance!

asked by: Everet C

Expert Reply:

For a jack that is similar and has a bolt-on installation I recommend the Trailer Valet JXS Trailer Jack w/ Footplate # TV64FR. This is a sidewind swivel jack with a 5,000 lb support capacity that fits a frame up to 4-3/4" tall x 3-3/4" deep.

However, something like the Ark XO Drop Down Corner RV Stabilizer Jacks # ARK87FR would probably be a better choice. Since these install on the corners it won't be so unstable. These have a retracted height of 19" and extended height of 25" for 6" of lift. If you are somewhere you don't need the lift at 90 degrees you can lock them out at 30 and 60 degrees for additional stabilization.

expert reply by: Robin H

Everet C.

4/7/2024

Thank you! I currently have something like these that are bolted on: TJ01RT-HD. These look great and would be perfect for my installation if they were not weld on. Do you have these as bolt-on? Bonus if it were direct replacement. Thanks in advance!

Robin H.

4/8/2024

@EveretC the # TJ01RT-HD actually is bolt-on. You have the option to weld them on but they have bolt holes for installation. The bolt holes are 3" apart on center so you can compare that to what you have now.