Boat Lights - Docking Lights, Surface Mount

I do have an option for you but the Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal is not offered with a red lens, only amber part #MCL48AB and clear part #MCL48CAB. For a similar clearance light has turn signal capabilities I…

Yes, they have different widths. Each of the Flex guards you mentioned item #LC1346271, item #LC1346281, and item #LC1346291 are 50-1/2" long. However, the width of the single is 6", the double is 12", and the triple is 18".

Hey Deve, thanks for reaching out! The Slim LED Strip Light #TN74ZR is not dimmable, but we do have an alternative with the LED Light Strip Kit w/ Wireless RF Remote Control #DIA76QR. This strip is designed more around RVs but since it uses 12V power…

Yes you can, Stan. You can both daisy chain the Peterson Great White LED Trailer Interior Cove Light #359-2, and screw them into the metal ribs on your trailer. You can then wire the lights to a simple on/off switch like the Single Rocker Switch…

Hey Michael, Sorry for the wait, I've reached out to TecNiq to see if they have a salt spray rating for the LED Boat Docking Lights #TN83ZR and still haven't heard back from them (most likely because of the holidays). I did see on their site…

Hey Rex, thanks for reaching out! Choosing flat towing parts can be confusing because of all the information and products out there, but here are my top picks for your 2019 Chevy Colorado: - etrailer Invisible Base Plate Kit #e98966 - etrailer SD…

Dexter did acquire AL-KO axles and the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #84546UC3 is the full assembly replacement. If you just wan to replace the bearings and seal then you will want #L44649,…

Your Dexter Trailer Brake Drum #9-44-1 is designed to fit the Dexter Trailer Idler Hub Assembly #8-288-3UC1. This drum and hub installs on 9,000-lb to 10,000-lb general-duty Dexter axles made prior to July 2009. The Brake Assembly Set part #AKEBRK-10…

The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…

More of a strip than a bar but definitely not one of the strand type LED lights like item #DIA86QR! The Premium Slim LED Strip Light item #TN38ZR measures 60" long x 1/2" wide x 1/4" thick. It's ridigid and will hold it's…

The hole for the LED Boat Docking Lights - Recessed Mount - Waterproof - 12V/24V - Qty 2 #TN83ZR is an oval shape. The hole is 4.25" x 2.3" and you will be able to use the gasket as a template to cut the hull. I have attached a dimensional…

The tilt angle is 120 degrees of the LED Boat Docking Lights #TN83ZR.