Can etrailer Fender # HP33RR Be Used On Left and Right Hand Side of Trailer

Question

Question:

Does it matter which side i need to replace, driver vs passenger side or will this fit to either side approximately?

asked by: Benjamin H

0

Expert Reply:

Hey Benjamin, the etrailer fender part # HP33RR that you referenced can be used on either the left or right hand side. Are you replacing one or two fenders?

expert reply by: Jameson C

0

Fender
(click to enlarge)

Answer 1

Glad you asked Larry, I can help! Our etrailer Single Axle Black Plastic Trailer Fender #HP33RR w/ Top and Side Steps for 12" Wheels' have brackets that are sold separate. CE Smith Mounting Brackets #CE26061G-2 for trailer fender with…

view full answer...

Answer 2

Hey Jeremy the distance between the mounting bracket slots of the fender part #HP33RR is 25 inches. These don't actually have mounting holes on top of the steps.

view full answer...

Answer 3

Hello JT, thanks for reaching out. You are on the right track with your drawing. The etrailer Single Axle Trailer Fender #HP33RR are designed to be bolted on from the top of the step onto a bracket. These specific etrailer brand fenders are a new…

view full answer...

Answer 4

I was able to find some photos online for a 2005 Lowe Boat Trailer and it looks to use the Fulton Single Axle Trailer Fenders with Top and Side Steps like part #F008593. I am not sure which exact size or color you need but I have attached a full list…

view full answer...

Answer 5

Yes, the Fulton Single Axle Trailer Fenders #F008594-2 that you referenced will work on an EZ loader trailer like yours. These were designed for 14 inch wheels like what you have and we've had customers come back and tell us they worked well on…

view full answer...

Answer 6

The recommended brackets to use with the Fulton fenders part #F008551 is the #CE26061G-2. I attached a picture that shows how a customer used these brackets with this fender for you to check out as well.

view full answer...

Answer 7

In regards to the CE Smith Single Axle Trailer Fender part #CE19503, this fender is designed to be used with 13" diameter wheels. The manufacturer does not provide specific measurements of the opening inside but rather the size of wheel that the…

view full answer...

Answer 8

There are a number of 40 inch fenders available for your Boston Whaler Nantucket Trailer, each of which is designed for single axle trailers with 13" diameter wheels. The CE Smith Single Axle Trailer Fender w/ Top and Side Steps #CE19503 is a…

view full answer...

Answer 9

I went out to the warehouse to measure the CE Smith fenders #CE19503. The opening of the wheel well is approximately 27.5 inches long. I also took a picture of the underside for you.

view full answer...

Answer 10

I went out to our warehouse to take a couple measurements on the CE Smith Single Axle Trailer Fender #CE19504 that you referenced. The inside arch between the two side steps measures 30-5/8 inches long. The step itself which I believe is what you…

view full answer...

Answer 11

Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - #CE19503 (Qty 1) CE Smith Single Axle…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Can etrailer Fender # HP33RR Be Used On Left and Right Hand Side of Trailer

Product Page this Question was Asked From

Continue Researching