Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Secures to the cross tube of your vehicle's hitch to provide a mounting point for your vehicle's wiring harness bracket. Installs with the included hose clamp.
Features:
Fits:
Note: Many wiring adapters, specifically the 4-pole to 7-and 4-pole adapters, include the connector-specific mounting bracket (piece 2 of 2).
California residents: click here
Easy to use, functions as expected
Good fit & EZ to install.
Works like a charm, saves time
fits prefect on my 2010 town and country
This product saved me from drilling a hole in my new Hannigan Trike.
Really appreciated your quick responses with my recent order. Letting me know that you sent it, the great tracking information etc.
Thank you.
Functions well. Worm gear band slips off if you over tighten. I thought I had ruined it but I eventually got it to work.
Did not work on the round tube reciever hitch that was on this truck
It made the installation very easy. it came with all the hardware needed to make a good looking finish to the entire project.
Good quality and very strong mounting bracket. shipping from etrailer. I will definetely buy from here again.
The product worked perfect and was shipped extremely quick ....
very much pleased with ETRAILER and will be using them from now on for all my trailer needs ,,,,,,
Should have bought this when I bought the connector bracket.
the plate is fine but the strap to hold the plate on would not get tight. screw it until it was close then it would pop and be loose again. piece of garbage!!! had to go buy a new better one!!!
Discard the clampThe plate is great for mounting the plug connector. Open the package and toss the clamp. Buy a smaller clamp that actually can be tighten and loosen with ease. The one with the package is an engineering night mare.
Great product did everything they said it would do and more made installation of wiring harness so much easier and cleaner
I received my package a day early and I installed my new trailer hitch in the same day. It took me about an hour to install it. I am very impressed with E trailer's service... I will defiantly will order again from E trailer. Thank you...
A snap to install and exactly what I needed for my 05 Tacoma, since there are no great mount points for an aftermarket 7-way. Product quality is good - definitely not flimsy. Etrailer's ordering process and communications were excellent. I'll be back!
Like dealing with merchants in the good old days!I first ordered an LED trailer plug converter from Etrailer over a year ago. Worked perfect until I broke it by driving away from the trailer without unplugging it. Bought three more. Etrailer kept me updated on the progress of the order, etc. Followed up with emails letting me know that the were backordered but would arrive soon. I have no idea how small or large this company is but it reminds me of dealing with a Mom and Pop hardware store in the old (i.e. 50s and 60s) days!
I was concerned this bracket might be flimsy but that is not the case. I'm not sure I need it for my installation as my Draw Tite# 75586 hitch appears to have the mounting holes for the bracket already to accept the ETBC7 kit, however, the bracket would extend and lift the ETBC7 7-pin connector for easier access and added protection respectively. In any case, for the price I feel it is cheap insurance in case I do need it.
hitch installation video was helpful... bolt clearances on the passenger side above the muffler were very tight the space saver spare barely clears the hitch. The wiring harness 7 pin mounting only bolts to the plastic valance. There is no room for any other type of mounting.
Gwendolyn Y.
2/11/2025
Hey neighbor! Install of the 7-way looks great. What do you tow with your Palisade?
Thanks for the great video on installing the 7 pin adapter (ETBC7L). The video was even on a Toyota Grand Highlander - my exact vehicle. I didn't like how low the video installed the bracket, so I made a few bends to this bracket to integrate it more into the the lower molding. This raised it up another inch or so compared to your video. You can see the height difference in the screen grabs of your install versus mine. Bottom line, you can use this bracket to fabricate for you unique situation.
Victoria H.
2/20/2025
Thanks for the feedback and including the photos Steven! I'm happy you were able to modify this to fit your specific needs. What are you towing?
Works great to mount my plug.
Brooke M.
3/24/2025
Love the clean install. Where are you headed to next with the new addition?
This bracket should not be sold for the 2024 Acadia. The panel on the bumper cover fits fine over the trailer hitch but will no longer fit once this bracket is installed.
Bracket is heavy gauge steal and powder coated. As it is a Universal bracket and not model specific it was a little too long for my application. I shortened it and it worked perfectly. I had been concerned about how one hose clamp could possibly hold it tightly to the hitch. It is very solid once tightened and not a concern at all.
Very solid well built mounting bracket.
I have bought from Etrailer before. An awesome American company. Sadly, with Trumps trade war tariffs, I will no longer be able to buy from American companies. Hope you get this fixed.
Everything went well in wring this up . My main gripe might be that I ordered the long bracket for the plug , but it wont work unless you have the other smaller bracket . This was not known to me. I just though the long bracket had the plug stick out farther than the short one. So now I either have to order a small bracket , or just bite the bullet and leave the plug attached to the hitch. These brackets should be sold together , not seperate.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Jesse M.
6/1/2013
It worked well on my round tube hitch. I used two stainless steel clamps instead of the one that was included. If I try to push down on it, the bracket would bend before it rotated on the hitch tube.