bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 2 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 2 Inch
  6. Rise - 0 Inch
Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs

Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs

Item # DT49MR
Our Price: $33.16
Trailer Hitch Ball Mount
Shipping Weight: 9 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This sturdy, 8-1/2" long ball mount slides into your hitch receiver so you can easily hook up your trailer's coupler to the included 2" hitch ball. Powder coated shank and chrome ball resist rust and corrosion. Pin and clip included. Great Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs part number DT49MR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2452)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch Ball Mount - DT49MR

  • Fits 2 Inch Hitch
  • Fixed Ball Mount
  • Drop - 2 Inch
  • Rise - 0 Inch
  • 2 Inch Ball
  • One Ball
  • 7500 lbs GTW
  • Class III
  • Draw-Tite
  • Steel Shank - Gloss Black
  • Chrome Ball

This sturdy, 8-1/2" long ball mount slides into your hitch receiver so you can easily hook up your trailer's coupler to the included 2" hitch ball. Powder coated shank and chrome ball resist rust and corrosion. Pin and clip included.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Hitch ball provides connection point for your trailer's coupler
  • Angle-cut end on shank allows for easy installation and removal
  • Both drop and rise positions available to ensure level towing
  • Powder coated steel shank and chrome hitch ball resist corrosion
  • Pin and clip included


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight: 7,500 lbs
  • Tongue weight: 750 lbs
  • Length: 8-1/2" from center of hitch pin hole to center of ball
    • 2-1/2" From center of hitch pin hole to back end of ball mount
  • Rise: 3/4" from top of inside of hitch opening
  • Drop: 2" from top of inside of hitch opening
  • Hitch ball diameter: 2"
    • Ball shank dimensions: 1" diameter x 2-1/8" long
    • Requires socket size: 1-1/2"
  • Hitch pin diameter: 5/8"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

2923 Draw-Tite Ball Mount - 3/4" Rise or 2" Drop - 7,500 lbs

63845 Tow Ready Trailer Hitch Ball





Customer Satisfaction Score:


Customer Reviews

Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs - DT49MR

Average Customer Rating:  4.9 out of 5 stars   (2452 Customer Reviews)

This sturdy, 8-1/2" long ball mount slides into your hitch receiver so you can easily hook up your trailer's coupler to the included 2" hitch ball. Powder coated shank and chrome ball resist rust and corrosion. Pin and clip included.

by:

the ball was missing in the package the rest was ok, delivered when expected but had to go fish out from UPS as the package was not accepted due to damaged container. all was ok but no ball on ball mount ?

Etrailer Expert

Brooke M.

1/4/2024

Oh no! I will have our customer service team reach out to you about the missing ball mount. Thank you for letting us know!



by:

Delivery was fast and on time. Thanks to their installation video the install was a snap. I didn't even need to lift the van. I played a piece of card board on the ground used a couple of wood blocks to support one end while I fished and fastened the bolts. I thought it would be a lot more difficult, therefore I was pleasantly surprised. Definitely a quality product from a quality company. Thankyou ETRAILER.



by:

Almost everything about this combo is great my only concern is the locking clip wraps around a notch in the pin instead of sliding through a hole in the pin., otherwise the insert and ball work well on my Subaru Wilderness.



by:

This Draw-Tite Ball Mount with 2" Ball is high quality, as is all products that Etrailer carries. I will be using it to pull my 10' aluminum trailer with my new Durango RT.



by:

This was fantastic from start to finish. All around great service. The quality is top notch. Would 100 percent recommend to the world!



by:

Worked great on a 1,500 mile trip towing a full 5x8 trailer. Absolutely no complaints.



by:

Perfect fit for the receiver. The black is black and the chrome is shiny. The trailer hasn't fallen off.'s all good, man!



by:

From the packaging, the installation videos, instructions, etc. etrailer makes it sooooo damn easy. Thank you 5/5



by:

Changed this item out as wanted a lover receiver. Return was super easy! Great customer service!



by:

Installation was very straightforward and easy. Tail light wire kit was easy to install except gaining access to car wire harness. Order of panel removal and method of panel removal made the wire installation slightly more difficult. Overall an excellent product and I am very satisfied with the utility of the hitch.



by:

Fit perfectly.



by:

Retainer pin weak replaced immediately. Part was exactly as described



by:

Fit my truck perfectly, installed myself and used the same afternoon. Glad I bought it.



by:

Nice solid piece



by:

There is a hole!

Etrailer Expert

Jenny N.

9/16/2022

It does appear to be a manufacturers defect. Customer service will be in touch with you.



by:

Received order as promised. Broken box from shipping and there is no damage o. Product. The way it pack is very secure. Definitely will use etrailer again!



by:

Use it a few times a week and still looks almost new. No signs of corrosion and great quality build.



by:

Fit perfectly



by:

Quick shipping, exactly what I needed for Model Y. Thanks



by:

Simple and solid. I mainly use it to pull a wood splitter around my property and other locations.



by:

The product was as described,
and delivered
quickly! Highly recommend this company!



by:

Did not come with a ball. But would be good otherwise.

Cole

6/12/2023

They actually reached out to me and sent me a ball!

Etrailer Expert

Mike L.

9/6/2023

@Cole We're glad to hear that you were taken care of!


by:

As advertised.
All parts delivered not
scratched and on time.



by:

Excellent customer service and fast shipping couldn’t be happier!



by:

Excellent quality and customer service!


25
2444
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

  • Would Draw Tite Ball Mount DT49MR Fit 2015 Nissan Pathfinder OEM Hitch
    Yes the Draw Tite ball mount part # DT49MR would fit the factory hitch of a 2015 Nissan Pathfinder.
    view full answer...
  • Does the Draw-Tite Ball Mount DT49MR Come With Hitch Ball
    Yes, the Draw-Tite Ball Mount part # DT49MR comes with a pre-torqued 2" hitch ball as well as a 5/8" diameter hitch pin and clip. It comes ready to go and use.
    view full answer...
  • Is Drilling Required To install Draw-Tite Hitch For 2021 Kia Forte
    Yes, there is some drilling that will be required to install the Draw-Tite Sportframe # DT83MR on your 2021 Kia Forte. You will likely have to drill some new holes, and enlarge a few holes for proper installation. This hitch is rated for 2,000lbs GTW and a maximum tongue weight of 200lbs. If you need a ball mount kit, I recommend the Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches # DT49MR. This kit comes with a 2" hitch ball, a 5/8" hitch pin, and a ball mount with a rise of 3/4" of...
    view full answer...
  • Recommended Trailer Hitch for a 2002 Dodge 2500 Roadtrek 170
    Robert, we don't have tow bumpers for your 2002 Dodge 2500 Roadtrek 170, unfortunately. What you could do instead is install a hitch like the Multi-Fit Motor Home Trailer Hitch # 82201 and slap a ball mount in there # DT49MR and you'd be all set. This is a multi-fit hitch that has a 3.5K capacity and can adjust anywhere from 47" to 72" wide, so you'd just need to measure your frame width to verify.
    view full answer...
  • Trailer Hitch For A 2022 GMC Acadia
    For your 2022 GMC Acadia AT4 we have the Draw-Tite Max-Frame Trailer Hitch Receiver # 76023. This is a class III trailer hitch that is rated for 4,500 lbs maximum GTW, 675 lbs gross tongue weight, and is a direct fit for your 2022 GMC. If you plan on towing, you're going to need wiring so you can have working lights on your trailer. If you're interested, the T-One Vehicle Wiring Harness for Factory Tow Package # 118720 is a super easy kit to install, that just plugs into your factory wiring...
    view full answer...
  • Brake Controller And Ball Mount For A 2018 Thor Freedom Elite Motor Home With A Tow Dolly
    For your 2018 Thor Freedom Elite Motor home I recommend using the Curt Echo Wireless Trailer Brake Controller Item # C51180. This brake controller is going to be the easiest to set up and works just like a standard brake controller. I have one and love it. As far as the hitch receiver for your motor home, you would need to measure the distance between the frame rails. I have provided a link to the page to the universal heavy duty weld on hitches we offer as well as link to the bolt on...
    view full answer...
  • Parts Needed to Tow Trailer With 2008 Subaru Outback
    For towing with your 2008 Subaru Outback you will need a trailer hitch, wiring, and a ball mount. I recommend the following: -Trailer Hitch Receiver: Draw-Tite Max-Frame # 75560 -Wiring: T-One Vehicle Wiring Harness # 118461 -Ball Mount: Draw-Tite Ball Mount w/ 2" Ball # DT49MR I have attached some review and installation videos for your reference.
    view full answer...
  • Hitch for 2022 Kia Telluride and Dual Ball Mount for Towing and Carrying E-Bike Rack
    When we installed the Curt hitch part # C13420 on a similar Telluride as your 2022 model we found that the hitch opening measured 16 inches from the top of the hitch opening down to the ground. Since your trailer has a height of right at 15-16 inches you'd want to shoot for around 2 inches of drop based on where you said you measured from which for that the # D210 would work great with. Should note that this hitch adapter cuts the capacity of the hitch it's used in by 50 percent. For...
    view full answer...
  • Ball Mount and Hitch Ball for Towing a U-haul Trailer
    The Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs item # DT49MR you were looking at would work great to haul a 6 x 12 uhaul trailer. The trailer has a maximum 4,400 lbs capacity which would not exceed this ball mount and balls capabilities. If you are going to be towing regularly, I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It...
    view full answer...
  • Ball Mount, Ball, and Hitch Pin to Use with Curt Hitch that Fits 2018 Subaru Outback Wagon
    When we had the Curt hitch # C13410 installed on a similar 2018 Subaru Outback Wagon as yours we found that from the top of the hitch opening down to the ground measured 15-1/2 inches. Since most trailer that your vehicle would tow would have a coupler height a couple inches shorter than that I would go with the Draw Tite ball mount part # DT49MR which has a 2 inch drop. This comes with a 2 inch ball which is a very common as well as a pin and clip to secure it.
    view full answer...
  • What Ball Mount and Coupler Is Needed For CE Smith Multi Sport Plus Boat and Kayak Trailer CE48870?
    The CE Smith Multi Sport Plus Boat and Kayak Trailer # CE48870 has a 2" ball coupler. It also requires a 4-way flat connector on your tow vehicle to operate the tail lights. The coupler has a height of 14" so you will need to ensure your ball mount has the correct amount of drop to tow level. If you measure the height to the inside of your receiver I can help you find the correct parts. The Draw-Tite Ball Mount w/ 2" Ball # DT49MR has a 2" drop and would fit with a 16" receiver height.
    view full answer...
  • What Hitch and Ball Mount do You Recommend for My 2022 Subaru Outback Wagon?
    For towing with your 2022 Subaru Outback, a great hitch is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" # DT73RR. Not only does this hitch offer the greatest available weight capacity we currently carry for your vehicle, it also comes with an easier installation. All of our other hitches require you to remove the impact beam from the bumper. By avoiding this, the installation of the # DT73RR does not take as much effort. As far as the ball mount, it really depends on...
    view full answer...
  • Trailer Hitch for 2017 Ford Escape with 14 inch of Ground Clearance for Ball Mount
    Going with a ball mount that has a different amount of rise/drop is typically the easiest way to compensate for a hitch height and coupler height that does match up well. Like if you installed the etrailer hitch part # e98866 which has a distance of 14-1/4 from the top of the hitch opening down to the ground you could use a ball mount like the # DT49MR which can do a drop of 2 inches or a rise of 3/4 inch.
    view full answer...
  • Trailer Hitch And Wiring For A 2021 Chevrolet TrailBlazer
    Yes the Draw-Tite # DT55GRdoes in fact fit your 2021 Chevrolet TrailBlazer! If you also need a ball mount and wiring I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT for the wiring and # DT49MR for the ball mount.
    view full answer...
  • Trailer Hitch And Wiring For A 2019 Tesla Model X
    For your 2019 Tesla Model X, we have the Draw-Tite Max-Frame # 76143. This is a class III hitch capable of towing up to 5,000lbs GTW, and 750 maximum TW. If you need wiring, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This kit is plug-n-play into your factory harness, alleviating all cutting and splicing. Finally, if you need a ball mount, I recommend the Draw-Tite Ball Mount # DT49MR. This kit comes with...
    view full answer...
  • Trailer Hitch For A 2022 Ford F-150
    Yes, there is a trailer hitch for your 2022 Ford F-150. The Curt Trailer Hitch Receiver # C86HR, is a class III trailer hitch that has a maximum GTW of 6,000lbs, and a maximum tongue weight of 900lbs. If you're needing a ball mount we have the Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches # DT49MR. This kit includes a ball mount, 2" hitch ball, and a hitch pin and clip.
    view full answer...
  • What Is The Ball Height Of The Stealth Hitch SH62VR On A 2023 BMW X3
    We got our hands on a 2022 BMW X3 and successfully installed this hitch # SH62VR. The hitch height was measured at 13" from the ground to the top inside edge of the receiver. The ball will sit about 2" above that. You are correct, this ball is a fixed height. You CANNOT use the stealth hitch receiver with other ball mounts like # DT49MR for example. The stealth hitch receiver is not made for towing, and you must use the stealth hitch ball only. I am not sure what trailer you have, but...
    view full answer...
  • Will A Trailer Hitch Disable The Hands Free Lift Gate Sensor On A 2022 Toyota Sienna
    The Curt Trailer Hitch Receiver # C22UR will not disable the hands free lift gate on your 2022 Toyota Sienna. To active it the hands free function, you will simply have to place your foot on either side of the hitch until you find where the senor activates. If you plan on using your vehicle to tow, I recommend getting a ball mount kit like # DT49MR which includes a pin and clip, along with a 2" hitch ball.
    view full answer...
  • Class IV Trailer Hitch For A 1996 GMC Suburban
    For your 1996 GMC Suburban, we have the Curt Trailer Hitch Receiver # C14029. This is a class IV trailer hitch, that has a maximum GTW of 10,000lbs, and a maximum TW of 1,000lbs. If you need trailer wiring, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55319. This harness is super easy to install, you simply plug # C55319 into your vehicle factory wiring and you're ready to roll. You may also need a ball mount kit, I recommend the Draw-Tite...
    view full answer...
  • Will Draw-Tite 2 Inch Ball Mount Rattle Around in Hitch Receiver Opening
    Every hitch and drawbar will have some movement between them, it's unavoidable. Any manufactured product like a receiver hitch will have variances in its size. For instance, the Curt # 14090 Class IV hitch has a 2 inch receiver. The actual measurement of the inside of the receiver tube is usually a little larger than 2 inches. The outside dimension of the shank of a ball mount like the # DT49MR you'd looked like is typically a tiny bit smaller than 2 inches. If the inside dimension of...
    view full answer...
  • Custom Fit Trailer Hitch, Wiring, And Ball Mount For A 1999 Lincoln Navigator
    For your 1999 Lincoln Navigator, I recommend taking a look at the: -Curt Trailer Hitch Receiver # C13049. This trailer hitch has a maximum towing capacity of 6,000lbs, and a maximum tongue weight capacity of 600lbs, however I recommend taking a look at your owner's manual for your vehicle's maximum towing capacities, and ensure you're utilizing the lowest number between the hitch and vehicle. Additionally, for a complete towing setup you're going to need wiring # C55344, and a ball...
    view full answer...
  • What Do I Need To Hook Up A Boat Trailer To My 2021 Ford Explorer
    I can definitely get you set up to tow a boat trailer with your 2021 Ford Explorer. You will need a few things for this setup: a hitch receiver, a ball mount, and a 4-way wiring harness. The first thing you will need is a hitch receiver. I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2", part # 76320. This hitch receiver has a maximum tongue weight of 600 lbs and a maximum gross trailer weight of 6,000 lbs. Once you have the hitch receiver,...
    view full answer...
  • What Is The Difference Between The etrailer Hitch And The Curt hitch For A 2022 Hyundai Palisade
    The main difference between the Curt Trailer Hitch # C13427 and the etrailer Trailer Hitch Receiver # e95ZR is that the etrailer hitch has a rugged matte black finish and the Curt hitch has a glossy black finish. Other than that, these hitches are virtually identical with the same weight ratings and both of them being compatible with a weight distribution system. That being said I recommend the etrailer Trailer Hitch # e95ZR because you get an incredible product with a lot of versatility...
    view full answer...
  • Hidden Trailer Hitch For A 2021 Toyota RAV4
    For your 2021 Toyota RAV4, we have the EcoHitch Hidden Trailer Hitch Receiver # EH97FR. Due to the completely concealed cross-tube design, the hitch virtually disappears when not being used providing you with that from-the-factory look. If you're interested in a complete towing setup, you'll also need wiring # C56434 for your trailer lights, and a ball mount # DT49MR. You'll need to measure the rise and drop needed first, before committing to a fixed ball mount.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew K
Installed by:
Andrew K
Employee Jeff D
Installed by:
Jeff D
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Alexander C
Written by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.