Lift Kit Solution for 2,000 lb Trailer Axle
Updated 10/27/2025 | Published 03/10/2025 >
Products Featured in This Question
Question:
Hello, I have an old trailer. It had a weld in spindle and that broke at the weld that rusted. I added a 2000lb new full axel but even with the axel on the bottom there is only 10 inches of clearance from the center of the hub to the deck-over. Id like to have about 4 more inches atleast. Im looking at this axel flip over under kit but weld on the axel seats once level. And maybe longer shackle spring mounts that attach to the trailer frame but hang down more so the springs attach down further from the frame like 6 or 8 inches long instead of 2 inches unless you have a better idea. Can you send me a link for long hanger brackets please as well Thanks
asked by: Josh
Expert Reply:
Hey Josh, if you have 2k axles the over under kit part # K71-384-00 would not work as this was designed for a larger diameter trailer axle. But we can help. To create a kit for that axle diameter size you'd need the part # APUBR-10 for the u-bolts and then part # TR22175 for the spring seat.
Then to add an additional 1-1/4 inch of lift you'd need the Correct Track part # LC87120.
That should put you right at the 4 inches of lift. I would not recommend trying to go with longer shackles as a way to gain the additional lift.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Trailer Tire Sizing
- Shop: Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Shop: Torflex Lift Kit - Tandem Axle - 3-1/8" Lift
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Search Results: 2000 lb trailer axle kit
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Swagman RV 4-Bike RV Bumper Mount Rack
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Suspension Enhancement
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Search Results: trailer jack
- Shop: Brake Controller
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Gooseneck Hitch
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Search Results: trailer leaf springs


Jameson C.
10/27/2025
Hey Josh, how did the setup go with the U-bolt kit and Correct Track lift kit for your trailer axle? Did the combination get you the extra clearance you were after? Your update could make it easier for others working on older trailers.