Availability Of Over-Under Kit Or Lift Kit For 2,200 lb Axle
Updated 10/22/2025 | Published 09/24/2025
Products Featured in This Question
Question:
I have a Dexter axle under my walk on utility trailer and was seeing if you carry an axle reverse kit moving the axle below the leaf springs instead of on top for it? Axle 2K7158, 2200 lbs capacity.
asked by: Tyler
Expert Reply:
Hello Tyler, thanks for reaching out. The 2,200 lb axles are generally a 1-3/4" tube diameter and I am sorry to say we do not offer an over-under kit for this. At this time we only offer kits for 2-3/8" diameter # K71-384-00 and 3" diameter # K71-385-00 axles.
We do offer a lift kit that can be used with really any double eye leaf spring suspension, the Correct Track Trailer Alignment and Lift Kit # LC87120. This provides 1-1/4" of lift. Or if you get two kits, it can do 2-1/4" of lift.
Or if you know a welder or have an axle shop nearby, you could have them weld on new spring seats # TRSS175 on top of the tube. You would want to have this done by a shop that is familiar with working on axles.
(click to enlarge)
Product Page this Question was Asked From
Correct Track Trailer Alignment and Lift Kit - Single Axle
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- RV Ride Control
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ Fit Inside a 13 Inch Wheel
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Search Results: trailer leaf springs
- Search Results: trailer suspension parts
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter
- Shop: Loadstar ST185/80D13 Bias Trailer Tire with 13" Aluminum Wheel - 5 on 4-1/2 - Load Range D
- Shop: Karrier ST185/80R13 Radial Trailer Tire with 13" Aluminum Wheel - 5 on 4-1/2 - Load Range D
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Replacement Nut for Trailer Suspension U-Bolts - 1/2" Diameter - Galvanized
- Search Results: lug nuts
- Search Results: tire
- Q&A: Installation of Slipper Spring with Open Eye End
- Search Results: slipper spring hanger kit
- Search Results: brake actuator drum
- Search Results: suspension enhancement
- Q&A: Replacing Harbor Freight Trailer Axle and Mounting on Underside of Leaf Springs
- Q&A: Correct Bushing and Bolt for 4-Leaf Slipper Spring # e33SR
- Video: A Closer Look at the Loadstar ST185/80D13 Bias Trailer Tire with 13" Aluminum Wheel
- Video: Checking Out the Wheel Lock Set for 1/2" Wheel Bolts (2 Locks, 1 Key)
- Video: Karrier ST185/80R13 Radial Trailer Tire with 13" Aluminum Wheel Spec Review
- Video: Hands-On with the Kenda K353 Bias Trailer Tire
- Video: Checking Out the U-Bolt Plate for 2" Diameter Axle, 1-3/4" Wide Spring
- Video: Feature Breakdown: Replacement Nut for Trailer Suspension U-Bolts
- Video: What to Know About the Zinc Shackle Bolt with Locknut for Double-Eye Springs
- Article: How to Raise Your Travel Trailer Height
- Q&A: Will 8k Leaf Springs Lift Trailer With 7k Axles
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Need New Leaf Springs For 2021 Grand Design Momentum 397
- Q&A: How To Tell If MORryde CRE3000 Equalizers Fit A 2021 Keystone Hideout 29DFSWE 1 Can I
on Trailer Suspension Parts
Jesse M.
10/22/2025
Hey Tyler, did the lift kit or the welded spring seat option end up giving you the clearance you needed on your utility trailer? Knowing what worked might help others trying to raise a similar Dexter axle setup.