Recommended Lift Kit for a Single Axle Trailer

Updated 08/01/2025 | Published 07/23/2025

Products Featured in This Question

Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K

(164)

$1305.78

Dexter Trailer Springs Over-Under Conversion Kit

(779)

$72.79

Dexter Trailer Springs Over-Under Conversion Kit

(779)

$84.63

Correct Track Trailer Alignment and Lift Kit - Single Axle

(51)

$204.60

Question:

I’m looking for a lift kit for my single axle camper

asked by: Krystian G

Expert Reply:

Hey Krystian. There are three options to lift your trailer depending on if your axle sits above or below the leaf springs or if you have torsion axles. I do not have a database that shows me what parts on are your Jayco trailer.

If you have a torsion axle where the suspension and axle are all one piece I'll need you to send me a picture of the axle tag or take a measurement of the mounting bolts center to center so I can find you the correct lifting block. I have attached a diagram below that will show you what to measure.

If your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and Lift Kit item # LC87120. This kit mounts to your spring hangers and moves the attachment point down 1-1/4" or 2-1/4".

If your springs are below your axle you will want to use one of our axle flip kits. These work by moving your axle below your springs and give you a lift double your axle's diameter.

3" Axle - Dexter Trailer Springs Over-Under Conversion Kit item # K71-385-00

2-3/8" Axle - Dexter Trailer Springs Over-Under Conversion Kit item # K71-384-00

What kind of axle and orientation to the springs do you have?

expert reply by: Jerred H

Torsion Axle Measurements
(click to enlarge)

Krystian G.

8/1/2025

I have the picture of the axle. Can you send me the email so I can send it to you?

Jerred H.

8/1/2025

@KrystianG You can send any pics you have to the email address you receive this response from. Do you have a picture of the axle tag? Without that I'll need more information than just pictures of your axle. Do you know whether or not you have a standard axle with leaf springs or a torsion axle where the suspension and axle are combined? If you have a standard axle, I'll need to know the diameter of it. If you have a torsion axle, I'll need you to take a measurement of the mounting bolts center to center so I can find you the correct lifting block.