Video Transcript for Review of Hollywood Racks LED Bar for Hollywood Racks - HLY96GR

Hi, everyone. Steve here with the etrailer. Let's take a look at the LED bar for the Hollywood Racks Second Gen CrossTrack bike racks. So folks, if you've ever had a driver tailgating you, maybe you're unsure if you're braking or turning because the bike rack's blocking your taillights, this LED light bar is going to solve that problem. It's going to sync with your vehicle's lights, providing you built-in brake signals, turn indicators, and even emergency flashers to keep your intentions clear and your ride safer as you're going down the road. Now again, folks, this does fit a couple of different options, so I'll put those up on the screen for you as well.

And this does come with everything you see on the table. You do have an option here to pull this when it's installed and change the angle. And you do have all the hardware for installation, along with clips throughout the wiring. You have a nice O-ring here as well. They give you a little four-way tester with lights that light up.

And they also give you this adapter from the four-way to the seven-way pin as well. Now, that's the one I'm going to be using today as the adapter. I do have a little junction box here. I do want to just pull it out so we can do a quick test together. Now, obviously my junction box is not included.

I get asked that a lot, believe it or not. Now what we're going to do is we're going to simulate the taillights, left turn, right turn, I'm sorry, brake lights, then right turn, and then I don't have a button here that does flashes, but obviously you get the picture as far as the flashers. I do want to go ahead and shut off the overhead lights in the studio so we can get a look at this as well. And I think I'm going to zoom out for this one. Brakes, right hand, back to left hand, and just steady on.

So again, folks, this is a great option for you if you're wanting to be safe out there on the road. And as I mentioned, it does come with this adapter from the four-way to the seven round or seven-way RV style connector that you see on a lot of SUVs, trucks, those kind of things, as well. As far as the dimensions on the light bar itself, it's about 15 and 3/4 inches overall on length. And just the bar itself's about an inch and 1/2 wide. And then of course the other side here, you're going to have the holes here to mount it to those racks. And then once again, you have a T handle here you can pull and flip this up or down depending on how you have your rack stored. Folks, that's going to wrap up our quick look together at this LED light bar for the Hollywood Racks. I'm Steven. Thanks for watching.