Replacement Rectangular Amber 2-1/2 Inch Long by 1-1/2 Inch Wide Clearance Lights

Published 05/21/2018

Products Featured in This Question

Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber

(2542)

$13.94

Optronics Trailer Clearance and Side Marker Light - Submersible - Rectangle - Amber Lens

(2567)

$12.75

Question:

Thank you see attached. I assume the lens cover doesn’t come off so I can just replace the light bulb.

asked by: David

Expert Reply:

The “SAE P2PC 98” you provided is a code used by the department of transformation and will not have any bearing on the correct replacement. In order to determine the correct replacement I would need you to either A) remove the lens and find the part number inscribed on the base or B) send me a dimensional photo of the light.

expert reply by: Conner L

click to enlarge

David

5/21/2018

Thank you see attached. I assume the lens cover doesn’t come off so I can just replace the light bulb.

Conner L.

5/21/2018

Thanks for the photos. In order to replace these lights, I recommend using the Clearance and Side Marker Light part # AL91AB for LED or the Clearance and Side Marker Light part # A91AB for incandescent. Both of these lights measure to be around 2-1/2" long x 1-3/16" wide x 7/8" deep. In order to install them you are first going to need to remove the cover on the ones you have now and then unscrew the mounting base. Once you remove the mounting base you will need to transfer the wires onto the new base and screw that into place while placing the new lens cover back on.