1-1/16" Diameter round. Mini LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Recessed mount with included grommet. 2-Wire lead design 0.180 bullets.
Features:
Specs:
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going take a look at the Peterson Great White Round LED trailer license plate light. Now this is a nice compact LED light, illuminates your trailer's license plate. It is a single LED light which will meet the DOT requirements when it's mounted properly above or on the side of your license plate, and an LED makes great replacements for incandescent lights because they'll last 50 times longer and they're more efficient, provide brighter light with less power output and of course, no bulbs to replace with brittle filaments. This is a nice clear lens over a white LED. It is a recessed mount. Comes with the included grommet.
Installation requires a three quarter inch diameter hole at the location you're going to install this in. It does include this nice locking ring on it. Prevents theft of the light, the ring will secure the light inside of the mounting hole on the trailer.It is a two wire design. Uses these male bullets which includes the power lead and a ground wire. This part is made in the USA.
The light diameter itself is going to be right at three quarters of an inch. Overall, including the grommet, is about one and one eighth inches. The wire length on this is right at eight inches. Operating voltage is nine volts to 16 volts. And then what I'm going to do is just put some power to this just to show you the light and how bright it is.
So we got our 12 volt power here. We'll hook up that and we'll hook up our other one. Now we'll go ahead and turn the power on and you can see there's your LED light. We'll go ahead and turn off the overhead lights and you can see how that one LED gives off a very nice shine. So with this around your license plate, it'll illuminate your license plate.
We'll go ahead and turn back on overhead lights, disconnect it. But that should do it for the review on the Peterson Great White Round LED trailer license plate light.
Average Customer Rating: 4.9 out of 5 stars (12 Customer Reviews)
1-1/16" Diameter round. Mini LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Recessed mount with included grommet. 2-Wire lead design 0.180 bullets.
very bright but it needs a halo to shine down more on the license plate
Worked great on my RZR to light license plate
Perfect product to light up trailer platform from fender shields.
Very bright. Works well
Great price and light output
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.