Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 3/4" round Uni-Lite uses two amber LEDs that shine brighter and last up to 50 times longer than incandescent bulbs. It’s built for low power draw—just 0.03 amps at 12.8V—so you get strong, clear light without stressing your electrical system. The LEDs are sealed inside a clear polycarbonate lens and housing for durability you can count on, with no fragile filaments or bulbs to replace.
Water and electronics don’t mix, but this light doesn’t worry about that. Its circuit board is completely sealed inside the housing, making the entire unit waterproof and submersible. Whether it’s spray from the road or full submersion at the ramp, moisture won’t damage the LEDs or corrode the wiring. It’s built to handle wet conditions without missing a beat.
Good visibility means better safety, especially in low light. This PC-rated light spreads illumination 90 degrees to either side of its centerline, giving you a full 180-degree beam pattern. Properly mounted, it doubles as both a clearance light and a side marker light so others can see you straight on or from the side.
When space is limited, this little light fits right in. At just 3/4" in diameter and 7/8" deep, it mounts flush using the included black PVC grommet. Installation only needs an 11/16" hole, and the two-wire pigtail—black for power, white for ground—makes wiring straightforward. The wire leads are 7-1/2" long and use 18-gauge wire for a clean, reliable connection.
The polycarbonate lens and housing resist impact and weathering, keeping the light clear and intact over time. Designed for 12V DC systems and backed by a lifetime warranty on the LEDs, it’s a tough little unit that keeps shining year after year without extra maintenance.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
Neat find for accent trailer marker lighting
I have ordered from Etrailer for several years, had a small problem on this order. They rectified the issue easily and quickly. Highly recommend Etrailer and their customer service team.
These little beauties are awesome! I am using them for small surface mounted turn signals for a "show" motor scooter... Theses little lights are bright and extremely compact which I love! The quality is actually much higher than I anticipated which was a great surprise I almost figured these could've been "throw away every year"'type of lights. But they most definitely are not! Great product for my application for sure
Easy to install. I used them for marker lights on my boat trailer. LEDs are very bright with very low power requirements. I would buy again.
My customer requested an extended light to keep track of battery voltage. I interfaced the Uni-Lite LED to our LCD-HV Low Battery Alarm and when the voltage dropped at the set point the light came on this was a great warning of low voltage. The light was extra bright and can be seen from a good distant. Very happy with the results of brightness and ease of connections.
I’m really happy with these lights. Super bright and straight forward installation. 3/4 inch hole with a hole saw and insert the grommets and lights.
The lights are easily fitted when drilling the proper size hole. Just push, and it'll snap. They illuminate a fair and enough amount of light for their small size! I recommend these lights to be installed as marker lights.
I have purchased several items from etrailer and recommend all of them and the folks at etrailer.
Items purchased by part #: 9653P; BK-70BB; 2118-605-04; 98174LED; PK12706; MCL11AKB; H20046.
Shipped well packaged. All items are accurately described and are fully functional. etrailer videos are a big help and their staff is knowledgeable!
I installed these lights on my old enclosed trailer because most of my old lights were broken after many years.
Very bright!
I did drill holes in my trailer because my old lights were big rectangular ones.
These and the led taillights I got really make my trailer much more visible.
The LED lights I purchased a year ago are still functioning well. I used these small clear amber lights as marker/clearance lights around my trailer I pull with my motorcycle. Anyone looking to make your trailer highly visible on the road should have these. Lights are easy to install and wire in.
Great lights! Nice and bright. Had them on the truck for a year now and no issues.
Perfectly replaced existing lights.
Great service. Product was just as expected. Install looks excellent on the front of my truck.
Dave
4/16/2014
Yes, these do match the OE orange marker lights. The color is just about identical in my opinion. I was going for a very clean look and these worked great. I have a few additional pics on the following forum if you are interested.
I love these lights. They compliment the other leds on my truck and camper. I installed these on the lower front air dam.
Good side marker very bright!
The lights I ordered are very bright and seem to be well assembled. I will be continuing to use etrailer for my lights
Great lights very bright, really like the size and shape of these lights and the fact that they are clear lenses and they match my complete clear trailer light set up
Awesome little light! Very bright! Fits snug in a 3/4" hole. These worked perfectly for my running light project on the air dam. Ordered these on a Sunday, they were at my door on Thursday. Excellent customer service Etrailer! (Side note, the lights behind the grill are 4" round, not the 3/4")
I have purchased lights from etrailer several times and the service and quality have been great. I have purchased lights for my truck and also have used there submersible lights for my boat trailer.
lights have been in service for over a year and still bright as the first day I installed them.
Shipping was slow, but I can't complain much considering it was free!
I chopped the fenders on my 2008 Jeep Wrangler, which involved removing the side marker lights. I installed a pair of these DOT approved lights to meet inspection requirements.
As for the lights, they are well-constructed and very bright. Installation was difficult; even after drilling and deburring a 11/16" hole, the grommet barely fit in. I had to put a small amount of grease on the light's lateral surfaces before the light would slide into the grommets.
Overall, I am very pleased with the product. Poison Spyder sells an inferior product at several times the price; I am glad I found these here!
Very well built, sturdy and totally sealed against moisture. I installed these into the top of my Haulmark enclosed trailer to act as clearance lights. Installation was a breeze, I just drilled a 3/4" hole with a step bit, wired all five lights together and tied it into the running lights of the trailer's harness. I put the ground against the steel frame. I went a step further and put a bead of clear marine grade silicone around the light to ensure no moisture makes it inside the trailer despite these being a tight fit. As you can see from the pictures, installation is clean and they're very bright, both day and night! I put one on either end, 6" from the sides and the three middles ones are spaced 10" apart. Similar to the clearance lights on a truck, I didn't use a template, just winged it.
Great little running light puck! Easy to install and very bright at night and is even very visible in daylight. Only about an inch in diameter on the outside, you wouldn't think it was much larger from the amount of light they provide.
Joseph J.
12/29/2020
Awesome, bright lights. They really blend in well in daylight but stand out at night.
I have finally finished the install of the great products that I’ve purchased from Etrailer. Curt 24K 5th wheel hitch, the lube discs, the front receiver hitch tube, the Factory 7-way connector and 7 -way extension (I have 3 7-way plugs on my truck) and the countless number of LED lights. The service is amazing and the customer service I received was fabulous. I really like these folks as they were vary knowledgeable about what I was after and pointed me in the right direction to accomplish my end goal. Thanks to everyone at Etrailer. I couldn’t have done it all without you.
David H.
9/1/2021
Everything I’ve done to my truck with multiple products from Etrailer has just been perfect. All working and performing as expected. Couldn’t have ask for more reliable products than those I’ve installed.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark P.
4/15/2014
Do these lights match the Ford 150 Orange running lights? Im looking to do the same thing with the lights like you did. Thanks for any input