Replacement Flush Mount Rubber Grommet

Replacement Flush Mount Rubber Grommet

Item # A11GB

lowest price pledge

Retail:$3.00

Our Price: $2.66

You Save: 11%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.01 lbs

Quantity: 
In Stock
Optronics Round Accessories and Parts - A11GB
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Trailer Lights
  • Mount Parts
  • Grommet
  • Optronics
  • Round
  • 11/16 Inch Diameter
Call 800-298-8924 to order Optronics accessories and parts part number A11GB or order online at etrailer.com. Free expert support on all Optronics products. Guaranteed Lowest Price and Fastest Shipping for Replacement Flush Mount Rubber Grommet. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (12)
  • Q & A (10)
  • Photos
  • Why etrailer?

Optronics Accessories and Parts - A11GB


Features:

  • Fits 3/4" Uni-Lite marker/clearance and utility lights
  • Diameter: 11/16"
  • Qty. 1 plastic grommet

A11GB Optronics Replacement Flush Mount Rubber Grommet






Customer Reviews

Replacement Flush Mount Rubber Grommet - A11GB

Average Customer Rating:  4.5 out of 5 stars   (12 Customer Reviews)


- A11GB
by:

everything works great thanks Jack 617071



- A11GB
by:

Excellent website - made my ordering very easy. All products arrived on time. I haven't had anything installed yet, but I was very pleased with the ordering process. 677197



- A11GB
by:

What more can I say about these grommets that hold the light pods in place? They are necessary if using the round LED lights. My only comment is that I would like to see them made from a softer type of plastic to make it easier to insert into the application because the plastic composition is stiff and not very pliable. 599616



- A11GB
by:

Great service and fast delivery 591889



- A11GB
by:

Had to replace this grommet on the 14 LED lights on the front of our 2016 Bounder. They were the exact item and saved us a lot of money. That is because a dealer told me I would have to buy the entire light, that would have been 14 x $13 each. This is the third time I have purchased something from etrailer and every time it has been at a fair price, delivered in a timely manner and been of good quality. 540086



- A11GB
by:

I bought this because it was recommended in the video for installing a brake controller in my Toyota Highlander. I should have looked at the details more closely, because it is way larger than needed for the application. I don't like drilling huge holes in my vehicle's firewall. I think something like the SWC8055 would be more suitable. 529303



- A11GB
by:

Exactly what I needed. Great customer service fast shipping 481751



- A11GB
by:

Got my package need the rubber garments for car hauler and motorcycle trailer had been looking for them just what I need great price Definitely will be buying again if you a catalog would like one 449581



- A11GB
by:

Received in 5 days, exactly as ordered. I would recommend etrailer.com! 449536



- A11GB
by:

About the easiest I've ever ordered anything and great prices. 276178



- A11GB
by:

Good secure mount for LED pod lights. Easy to install. Good product good price 220136



- A11GB
by:

Awesome product, price and service! 199527


12
12

Ask the Experts about this Optronics Accessories and Parts

Do you have a question about this Accessories and Part?


  • Hole Diameter For Flush Mount Rubber Grommet
  • The Optronics Flush Mount Rubber Grommet # A11GB and entire light assemblies like # MCL111AB will install just fine in a mounting surface with a 1/4-inch thickness. This grommet whole requirement is ¾” round made specifically for 3/4-inch Uni-Lite marker/clearance and utility lights. The outer diameter is 11/16". If you also need grommets for trailer wiring we offer 7/16-inch inner diameter grommet # SWC8055 and 9/16-inch inner diameter # SWC8057.
    view full answer...

  • Trailer Hitch and 7-Way Wiring Connector Installation on a 2004 Jeep Grand Cherokee
  • The hitch that you referenced the Curt # 13051, is indeed a class III hitch that is confirmed as a fit for your 2004 Jeep Grand Cherokee. I have included a video of this installation for your reference. Since your Cherokee does not have any existing wiring harness you are again correct that there are several plug in applications that will establish a 4-way trailer wiring harness for your vehicle. To install a fully functional 7-way connector for your Jeep you will have to start by establishing...
    view full answer...

  • Should the Power Wire for the Curt # C56387 be routed Inside or Outside on a 2018 Chevy Malibu
  • Typically the power wire for a wiring harness like the T-Connector # C56387 that you are installing on your 2018 Chevrolet Malibu is routed outside and under the vehicle. If you can locate a grommet like part # A11GB at the rear of your vehicle you can then route the wire outside without drilling through your Malibu. Be sure to seal it back up with a gasket maker like part # LT37467. Once outside we usually try to route the wire through the frame as that will keep it protected pretty...
    view full answer...

  • Will Optronics Oval Reflector For Uni-Lite Trailer Lights Work With Grommets On Uni-Lite
  • The Oval Reflector for Optronics Uni-Lite Trailer Lights, part # A11RXB may work well for your lights, even with a grommet like part # A11GB. I have attached a couple of photos that show the dimensions of both the # A11RXB as well as the # A11GB. The outside dimension of the #A11GB measures just over an inch. The recessed area on the back side of the # A11RXB measures 1.1 inches, and is .16 inches deep. The hole in the reflector measures 3/4 inch across so the Uni-Lite like part...
    view full answer...

  • Will Optronics Flush Mount Rubber Grommet A11GB Fit 1/4-Inch Thick Mounting Surface
  • The Optronics Flush Mount Rubber Grommet # A11GB and entire light assemblies like # MCL111AB will install just fine in a mounting surface with a 1/4-inch thickness. This grommet is made specifically for 3/4-inch Uni-Lite marker/clearance and utility lights. If you also need grommets for trailer wiring we offer 7/16-inch inner diameter grommet # SWC8055 and 9/16-inch inner diameter # SWC8057.
    view full answer...

  • What is the Outside Diameter of the Hopkins Molded Trailer Wire Connector Part H20046
  • I went to our warehouse to get the Hopkins trailer wire connector # H20046 to provide you the measurement you requested. The outside diameter is 0.61 inches using a digital caliper. A rubber grommet you should take a look at is the Optronics flush mount rubber grommet # A11GB. I went to our warehouse again to measure the inner and outer diameter. The inside diameter is 0.61 inches but can stretch to 0.74 inches. I think this would be perfect for what you are needing. The outside diameter...
    view full answer...

  • Needing a 2-3 Wire System that will Seperate the Turn Signals from Stop Signal
  • I do have a part that will work for what you are needing, but the Hopkins Tail Light Converter Kit, part # HM48895, will not take a 2 wire signals and split it into a 3 wire signal. To split your 2 signals into 3 you will want to use the Tow Ready Vehicle to Vehicle Tail Light Converter, part # 118158. This will take your combined turn and stop wires and separate them into right turn, stop, and left turn wires. Please note that this converter does not work well with LED lights. Another...
    view full answer...

  • What is the Difference Between the Optronics Uni-Lite Clearance Lights MCL12RK and MCL12RKB
  • The difference is the grommet part # A11GB. The # MCL12RKB comes with it and the # MCL12RK does not. You should note that we do not carry the # MCL12RK.
    view full answer...

  • Best Place to Drill or Run Wiring Through the Firewall on a 2014 Jeep Cherokee
  • The ideal thing to do when adding wiring to any vehicle would be to use existing holes already made in the firewall. If you do not have any existing holes then you will want to drill in a place that is close to where you are needing to run the wire. Be sure to check the other side of the firewall before drilling so that you do not drill into anything on the other side. Make sure to run the wiring away from where feet could get caught or wrapped around the wiring. If you do have to drill...
    view full answer...

  • Wiring Installation Into the Custer Light Mounting Box # AL65-02
  • For the Custer Light Mounting Box - (2) 6-1/2" Long Oval Holes - Diamond Plate Pattern - Aluminum # AL65-02, you will use the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB with lights like # STL22RB or # STL22AB. These lights use a pigtail like # A47PB or # A45PB. You will need to drill holes in the housing to mount and add a hole for the wiring as well. I recommend using a the Snap Bushing Grommet - 7/16" ID, 9/16" OD # SWC8055 or the Replacement Flush Mount Rubber Grommet...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.