Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Stepping up from older incandescent lights makes a real difference in visibility and reliability. This 3" round light uses 7 white LEDs behind an amber lens to put out a bright, even glow while drawing less power. The LEDs are rated to last up to 50 times longer than traditional bulbs, so you don’t have to worry about breakage or dimming filaments. It runs on a 12V DC system with a simple 2-wire pigtail setup—black for power, white for ground—so you get bright, dependable light with low maintenance.
If you like your setup to look neat and complete, the snap-on chrome bezel gives this light a polished finish once installed. The lens and bezel sit tight against the trailer surface, keeping everything clean and low-profile. The bezel isn’t just decorative—it helps protect the edges of the acrylic lens while making the light look factory-finished.
Rough roads and weather can be tough on trailer lights, but this one’s built with a durable polycarbonate base and an acrylic lens that resist cracks and wear. It’s designed as a non-submersible surface-mount light, so it installs flush against your trailer without needing a cutout. Once mounted with your hardware, it stays in place and ready for the miles ahead.
Visibility is key for safety, and this P2-rated light is engineered for just that. It produces a 90-degree beam pattern—45 degrees to either side of centerline—so it’s ideal as either a clearance or side marker light. DOT and SAE compliance means it meets lighting standards for brightness and coverage, helping other drivers see your trailer clearly in low-light conditions.
Installing this light is straightforward. At 3" in diameter and only 1/2" deep, it mounts flat using two holes spaced 2-3/8" apart (center to center) with just a small hole for wiring. The 5-1/2" lead wires give you enough length to make solid connections without hassle. It’s sold individually, so you can add exactly as many as you need for your setup.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a LED clearance or side marker light with the chrome bezel. This small round trailer light serves as either a side marker light or clearance light for your trailer. It's an LED system. LEDs make great replacements for incandescent lights. They last longer, they burn brighter, they're much more efficient, you don't have to worry about replacing bulbs or worry about brittle filaments with an LED system.This unit features the nice amber lens, it mounts directly on the surface of the trailer, you got two mount holes on the unit, mounting hardware not included. Then it has this chrome bezel, this covers the mounting hardware and adds a clean finish look to the unit.When it comes to the wiring, this is designed for a 12 volt system, there's a two wire design so your white wires your ground wire, black wire is your power wire.
It's SAE and Department of Transportation compliant, and it is a P2 rated light.When it comes to the overall dimensions, starting with the overall diameter measuring edge to edge goin' in this direction, measures about 3 inches. The overall depth is about 7/16th to half inch deep. The diameter of just the lens that measures 2 inches, and the mount holes on the unit are separated on center by 2 and 3/8th inches.We're gonna go and hook it up to power that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead lights so you can see it in a lower light setting. So you can see here that it sends out a nice, bright, consistent signal.
When it comes to the LEDs or the diodes, this unit contains a total of seven LEDs, so the multi diode design really helps optimize the overall light output.That's gonna do it for today's look at the LED clearance or side marker light.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Judy
2/5/2023
etrailer has the best products EVER ! Your trailer lights were the perfect addition to the large diamond plate utility trailer we built . I would never hesitate a minute to buy more products from you folks, and your customer service crew was so helpful. Thank you again.