1. Trailer Leaf Spring Suspension
  2. Timbren
  3. Axle Replacement System
  4. Axles
  5. Universal Fit
  6. 5200 lbs
Timbren Axle-Less Trailer Suspension System - 2" Lift Spindle w/ Brake Flange - 5,200 lbs

Timbren Axle-Less Trailer Suspension System - 2" Lift Spindle w/ Brake Flange - 5,200 lbs

Item # TASR5200S05
lowest price pledge
Our Price: $732.25
Trailer Leaf Spring Suspension
This item qualifies for Free Shipping
Shipping Weight: 145 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

The Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle. Suspension units replace your existing axle and operate independently. 2" Lift spindle allows for maximum ground clearance. Fits any frame width. Lowest Prices for the best trailer leaf spring suspension from Timbren. Timbren Axle-Less Trailer Suspension System - 2" Lift Spindle w/ Brake Flange - 5,200 lbs part number TASR5200S05 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (137)
  • Q & A (9)
  • Photos
  • Why etrailer?

Timbren Trailer Leaf Spring Suspension - TASR5200S05

  • Axle Replacement System
  • Axles
  • Universal Fit
  • 5200 lbs
  • Timbren
  • Spindles Only

The Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle. Suspension units replace your existing axle and operate independently. 2" Lift spindle allows for maximum ground clearance. Fits any frame width.


Features:

  • Suspension system provides a safe, smooth, quiet ride for your trailer
    • 2 Separate units replace your existing axle
  • AEON progressive-rate main springs absorb road shock and support trailer's load
    • Deliver a smooth, stable ride, regardless of load size
    • Compress and become stiffer as load increases, boosting spring strength
  • Rebound springs act as return devices to minimize rattle and bottoming out
    • Create constant pressure on the arm, so the suspension is never completely relaxed
  • 2 Independent units can eliminate the need for a thru axle
    • Increase ground clearance
    • Lower deck height for easier loading and unloading
    • Reduce roll during cornering
    • Fit any trailer width
  • Built-in camber and toe-in help your trailer to track straight, reducing wear on the tires
  • 2" Lift, EZ Lube spindles accept trailer hubs (sold separately)
    • 2" Lift provides maximum ground clearance
    • Spindles can be easily removed from units for simple replacement if damaged
  • Heavy-duty steel construction with black powder coat finish resists wear and corrosion
  • Easy to install and align
    • Bolt or weld to your trailer's frame


Specs:

  • Fits: 1-axle and 2-axle trailers that use regular tires
    • Not recommended for triple-axle applications
  • Weight capacity: 5,200 lbs
  • Quantity: 2 suspension units without hubs
  • Spindle/Hub compatibility:
    • Bearings: 25580 inner/15123 or LM67048 outer
    • Seal inner diameter: 2.250"
  • 3-Year limited warranty


Note: The Timbren Axle-Less suspension system may require additional support on your trailer. If your trailer does not have a crossmember above the spot where you want to install the Timbren system, you may need to reinforce the frame. You can accomplish this three ways. First, you can retrofit the trailer with a crossmember. Second, you can build out the trailer frame. Third, you can use 2" x 3" steel tubing to connect the 2 Timbren suspensions together using the built-in hole on each unit.


Ground Clearance

Ride on rubber with Timbren's Axle-Less trailer suspension system. This one-of-a-kind suspension consists of two separate units, each containing rugged steel arms and two strong, hollow rubber springs. Overall, the system safely and effectively absorbs road shock, minimizes trailer bounce and rattle - regardless of load size - and helps to protect your trailer's components and cargo. Built-in camber and toe-in keep your trailer tracking straight to minimize tire wear. Integrated hangers attach to your trailer's frame. And 2" x 3" holes make it easy to reinforce your trailer's frame by adding steel tubing (if needed).


The Axle-Less independent suspension system replaces your trailer's existing leaf spring suspension and can eliminate the need for an axle. The independent action of the suspension reduces roll when your trailer is cornering and allows you to maximize ground clearance and minimize deck height. Your trailer can have the same side-to-side clearance as your tow vehicle. And the low deck height makes it easy to load cargo from either the rear or the side.


Because you're riding on rubber, your trailer will ride smoothly and comfortably, whether you're navigating rocky terrain or highway asphalt.


Timbren Axle-Less Suspension Parts

Components

  1. The AEON progressive-rate main spring supports the weight of your trailer and cargo and easily absorbs road shock. It is constructed of heavy-duty, hollow rubber.
  2. The rebound spring minimizes trailer bounce, rattle and bottoming out. It keeps the suspension under constant tension and ensures that the main spring compresses and expands in a controlled fashion. And it delivers a smooth, stable ride - regardless of how much cargo is on the trailer.
  3. The trailing arm and integrated hanger attach the suspension to the side and bottom of the trailer frame.
  4. The control arm carries the spindle and the hub. It pivots on strong, long-lasting urethane bushings that never require lubrication.
  5. The EZ lube, 2" lift spindle (straight model shown) is simple to grease. If damaged, it can be removed and replaced, saving you both time and money.
  6. The hub is not included with this model.
  7. The built-in hole accepts 2" x 3" tubing. If there is no crossmember above the suspension, you can easily add support to your trailer's frame by inserting 2" x 3" steel tubing through the hole on each suspension unit and then bolting the tubing into place.

Timbren Axle-Less Suspension versus Leaf Springs

Leaf Spring Example

The Axle-Less suspension's progressive spring is a definitive upgrade over leaf springs. Although leaf springs deliver a stable ride when supporting a load, a trailer with leaf springs will bounce and rattle when it's empty or supporting a light or off-center load. On the other hand, your trailer can bottom out on bumpy roads if the load is too heavy. The AEON progressive-rate springs of the Axle-Less suspension always deliver the same reliable performance, no matter the load size. As more weight is added to the trailer, the springs compress and become stiffer, offering more support for heavy loads. And because they rebound more slowly than leaf springs, the AEON springs do a better job of absorbing road shock, thereby keeping your trailer from bouncing and rattling when you're carrying a light load. So with this versatile system you will enjoy a smooth ride whether you're towing an empty trailer or a hefty load.


Unlike leaf springs, Timbren's Axle-Less suspension units operate independently of one another. Each spring activates only when needed. This reduces roll and delivers top-notch performance, even when you're hauling off-center loads. When your trailer with leaf springs takes a turn, one side of the suspension compresses and takes on more weight, and the other side becomes looser and bounces. This causes rattle and can make the trailer lean to one side. But when your trailer with the Axle-Less suspension takes a turn, one side compresses and becomes more rigid to absorb the weight, and the other side expands to normal height to help steady the load and minimize bounce and rattle. The load stays better balanced, even if it is off-center.


Timbren Axle-Less Suspension versus Torsion Axles

Torsion Axle Example

Timbren's Axle-Less trailer suspension system is a great alternative to torsion axles. While both systems allow either side of the trailer's suspension to operate independently, only Axle-Less suspensions are actually separate units. Torsion axles still require a bar that spans the bottom of your trailer, whereas Timbren's system can eliminate the need for a thru axle - giving you the same amount of ground clearance from the front of your trailer to the rear. It also allows Axle-Less suspensions to fit any trailer width - unlike torsion axles, which have to be fitted to an exact frame width.


Axle-Less suspensions operate in a smoother, less stressful manner than torsion axles. Torsion axles use a twisting motion, where the bar inside the axle tube rolls against rubber cords or a rubber wall to create compression and resistance. The up-and-down motion of the main spring and the side-to-side motion of the rebound spring in Timbren's Axle-Less suspension work together to provide smooth, consistent compression - with no twisting - that results in a better ride and less stress on the suspension's components.


Installing the Timbren Axle-Less Suspension

Whether you are building a trailer or retrofitting your existing trailer with the Axle-Less system, you must make certain that the trailer's frame is both perfectly square and sturdy enough to support a heavy load without the aid of a thru axle.


Install Option 1

There are three ways to install the Axle-Less suspension. The easiest method, which is recommended if you are replacing axles on your trailer, is to install a piece of 2" x 3" tubing (sold separately - available at most weld shops) through the integrated hole in the Axle-Less suspension. Then all you need to do is bolt the suspension to the side of the trailer's frame with three bolts (not included).


Install Option 2

The second option for installation is to fabricate an inboard extension plate that attaches the trailer's frame to the Axle-Less suspension.


Install Option 3

The third method of installation is to bolt the Axle-Less suspension's hanger to the trailer's frame and to an existing crossmember that is in the area where you want to install the suspension.


With both the second and third options, you must use three bolts to attach the suspension to the side of the frame. And you also have to use two or three bolts to attach the suspension to the bottom of the frame extension, or crossmember. Both the second and third methods of installation will eliminate the need for a thru axle and provide the most clearance.


Measuring Diagram

Timbren's Axle-Less suspension units should be installed directly across from one another. Before mounting the units, measure back from the coupler and mark the frame to make sure that the two distance measurements (A and B) are within 1/8 inch of each other. Then you can drill holes through the frame and attach the hangers with Grade-5, half-inch bolts (not included).



ASR5200S05 Axleless Trailer Suspension System by Timbren - 2" Lift Spindle - Without Hubs - Regular Tires - 5,200 lbs

Installation Details TASR5200S05 Installation instructionsAlternate Instructions TASR5200S05 Installation instructions




Customer Reviews

Timbren Axle-Less Trailer Suspension System - 2" Lift Spindle w/ Brake Flange - 5,200 lbs - TASR5200S05

Average Customer Rating:  4.6 out of 5 stars   (137 Customer Reviews)

The Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle. Suspension units replace your existing axle and operate independently. 2" Lift spindle allows for maximum ground clearance. Fits any frame width.

- ASR2KHDS05
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Built a custom trailer to haul an ATV on some bad rural roads in Baja. I used the 2" drop axel-less suspension to allow for full size tires and wheels yet keep center of gravity low. Easy to install on exposed frame, but note that a required brace or 2" square steel bar may be needed and sourced on your own. The finish is not very durable and does not survive the normal bumps, wrench scrapes and scratches of installation; plan on some touch up once installed. Pay attention to the spindle clearance and wheel offset. 317250



- A35RD545E
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Extremely good product. Rides much better than traditional leaf springs. Ordering. A 7,000lb 8 lug set for the big trailer. 593860



- ASR1THDS03
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


I installed these on a small jeep style camping trailer that I built. I plated my frame and also used the suggested two inch square tubing to tie them together. It rides very well, looks like it should be very durable, it's a simple design, simple to install, more economical than other independent systems, has less parts to go bad than other systems, I would highly recommend to any body using a trailer on rough roads! 582196


Comments
We just drove 1200 miles mostly at 75mph. The axles work very well in all conditions, trailer ride very smoothly.
PhilTreeMan - 11/20/2019

63425

- ASR5200S01
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


A little bit pricey, at first. But in the long run they are cheaper. We used to bend or break an axle every 3 or 4 months. But we have had these a couple of years now with no problems. One thing that is nice is on a tandem axle set up you can get a flat and you just have to take the wheel off and run on 3 or 2 wheels without the hubs hitting the ground. 593458



- A12WS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Good product and easy to install on my new build of a off road trailer for my side by side. Thanks 628307


Comments
This has been a great product and works great and was easy to install
John V - 04/14/2020

73224

- ASR5200S01
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Timbren Axle-Less Suspension - Spindle Only - Regular Tires - 5200 lbs Item # ASR5200S01 Looks great on empty trailer, idea is good, bad execution. When loaded tires "splay out" severely, excessive tire wear, obviously too much play in system somewhere. 584361


Comments
Excessive camber which causes wear on the portion of the tire tread closest to the trailer can be caused by a few different things. 1 The axle-less suspension system has a 5200 lb per set capacity, so youll want to be sure this amount is not being exceeded. 2 The surface of the trailer that the suspension member is added to needs to be an integral part of the trailer that should have NO give in it whatsoever. Any flexing of the side member there will throw off the camber of the tires. I have seen what you describe occur when the suspension system has been mounted to tubular steel that made up the edge of the trailer frame. In that instance, some angle iron was added to stiffen things up. 3 Its not required, but a piece of 2x3 inch tube steel of the appropriate length can be used as a beam connecting the two sides, utilizing the existing hole in the axle-less suspension member. This will help stiffen things up. 4 The suspension system should have included some shims that can be used where the spindle attaches to the suspension portion of the assembly. Using these shims can decrease the camber, but only if the points mentioned above are taken care of. Ive checked with Timbren regarding the above, and they concur.
-- Mike L - 11/21/2018

45920

- A12WS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


I am pleased with the Timbren Axle-Less Trailer Suspension System with Hubs - 5 on 4-1/2 - Off-Road Tires - 1,200 lbs. I had a project and it worked out just fine. 254872



- A20RS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


I pull my Sea Doo GTX 300 (that means they are pretty heavy!) PWC's from Wisconsin to Florida twice a year. That said, this last trip to Florida caused me to bend the original straight axle on my trailer. Not fun. I ordered the Timbress Axle -less axles, and after a few hours of work on the trailer, they were installed, square and true. I immediately put the Sea Doos on the trailer to see how the trailer performs with the new axle-less system on it. one word: FANTASTIC!!!! I guarantee if I have to fix this issue again, I will use the exact same product. It is awesome! 736299



- ASR3500S06
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


The suspension I ordered is of high quality and I received it sooner than I expected , its good to do business with a company that produces its products so fast. 271528



- ASR2KHDS05
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


I was looking for a low profile axle system for my motorcycle trailer. The primary requirement was to be able to load my motorcycle by myself which required a low-profile trailer. With the 4" drop provided by Timbren, this setup turned out great. I originally intended on using ramps but after I swapped the leaf spring axle out with the Timbren, I found I was able to ride my motorcycle on/off without the need for the ramps. Originally, I was going to go axle-less but I found when torquing down the assembly to my frame it started to compress the aluminum rail. To take the pressure off the frame I added the 2" bar from axle to axle. Pulls smooth and effortlessly. I've had several people comment on the trailer height with one wanting to buy the trailer from me. This person worked at the local Honda Dealership. He thought it was a great design and I would imagine he's seen a variety of trailers come through his lot. The other option I considered was a torsion axle but I was looking for the lowest profile I could get. Therefore, cost was not a key factor. I also like the soft ride the Timbren system provides. Not sure if the torsion design would have been as smooth over bumpy roads. Regardless, I'm pleased with how this project came out. 352952


Comments
Its been a year since Ive installed the new axles on my trailer my comments above still hold true. Im very pleased with the ride quality of the system after a year. The trailer tracks true and has hauled many things other than my motorcycle. Even empty it doesnt hop around like the original stock straight axle did. No regrets on the purchase.
Pat A - 03/15/2018

35909

- ASR3500S06
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Only been driving around on the axle-less system for about a week now and it has far exceeded expectations. I get better gas mileage, my trailer now sits like it was intended to, my trailer doesn't bounce like it used to, I wouldn't trade this axle system for any other. Just wish I would have known which outboard assembly arm my trailer needed with the axle-less system before I placed my order. Still not a problem though, plan on using the wrong outboard arm to build a different trailer. So far, a great product! 208571



- ASR2KHDS02
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Great looking parts, robust design, professional looking welds....Nothing missing... I contacted Timbren prior to my purchase and received a prompt, helpful reply... The supplied instructions are complete and straight forward, i'm confident should i have any issues, contacting them will get them resolved... 286117



- A20RS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


This is my favorite suspension system in all the world! Rides like an absolute dream. Easy to set up and install. Works on any trailer frame size. One thing to know: You don't get the ride height you get with a standard leaf spring suspension. Even with 15-inch wheels, the ride height is pretty low - maybe 10-12 inches of ground clearance to the bottom of the main trailer frame. If you need more ride height, get the lifted version. A few areas of possible improvement? It's difficult to bolt the suspension unit to a crossmember using the middle bolted hole, which uses a tacked-on weld nut. You have zero room for error when drilling the hole through your cross member, and you can't really use the suspension as a template. Hmmm ... also, the hanger plate mounting holes are positioned 1-inch from the bottom of the trailer frame. That makes it very difficult, since I use channel side rails, to use standard 1/2-inch USS or SAE washers on the backside. There isn't room. Just an extra 1/4 of a inch would allow me to use standard washers underneath the nuts on a channel frame. Nitpicking aside, it's amazing. 410020



- A12WS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Purchased 2 sets of the Timbren 1200 Axle-less systems for upgrading the suspension on an older 30' ft glider trailer. Single axle with small (13") tires made towing tough due to porpoising, dragging on drive entrances do to poor flotation; also German made and metric, no repair parts. GVW 2000 lbs equated to bouncy ride. Dual sets now allow the trailer to ride over bumps and sharp inclines easily, smoothly, little bounce on country roads; porpoising is history. My glider now rides securely, safely, quietly. Install time 4 1/2 hours (includes head-scratching). Results are outstanding, units are totally solid. Recommend the square tube interconnect, easy and quick - trailer frame was on the light side, so a precautionary fix. Clean look underneath. Ordered 5 wheels w/tires, very nice. Helpful neighbor so impressed he ordered a HD single set for his new DIY snowmobile trailer. Customer satisfaction 100%, from phone order, online support, product information, immediate shipping, install instructions, followup... HIGHLY RECOMMENDED! 580744


Comments
I have just a little more to add regarding my purchase: Two sets, of the Timbren Axle-less assemblies, 1200 lb, and 5 wheels. I placed the order via phone, and whoever was on-call that day provided great answers and recommendations regarding the units, wheels and tires. At 31 feet, the trailer originally exhibited amplified porpoising on any bumps or dips in the road. Also bouncing and occasional sideways tipping due to the single axle. It made a lot of noise on my mountain community washboards. I speculated that the Timbren units would solve most, if not all of these problems and they have. Installation on my older 31 ft European ie, metric and no longer manufactured glider trailer was a mere 4.5 hours from removal of the old single axle to setting the trailer back down on its new assemblies. Instructions are complete, precise, useful and helpful. Appreciated. Little to comment on as installation was all straight-forward. I would like to describe the maiden voyage to the airport and back, but there is nothing to tell, other than it towed beautifully proper alignment instructions, and all that I viewed from the rear view mirror looked like a magic carpet ride. It rides over washboards and pot holes like a marathon hurdler, the 4-wheel independent suspension is great. Packaging: the shipping boxes all arrived in good condition, but the cardboard component boxes inside them... not so much. Most were ripped and open due to heavy components lightly surrounded with brown packing paper, just token amounts. Parts: all was accounted for minus a pair of spindle axle washers for one set, easily replaced at the local farm and ranch supply. No squawk, just an fyi. I am very pleased with your product and support, and was happy to leave a 5-star review with photos. The upgraded suspension was also a topic this past weekend at the glider port by those who regularly trailer their ships to various soaring events, some as far as a thousand miles away. My compliments to eTrailers, hope you can use my info,
-- comment by: Kelly F - 11/28/2018

46128

- A20RS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


This is my first time in building something like this 774926



- A35RS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Had a broken torsion axle on dual axle boat trailer. Manufacter six to eight weeks to replace. Got this product in week. Installed same day. Very happy .cancelled new Axel order. 263087



- ASR2KHDS03
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Excellent, helpful customer service sold me this product, and trust me when I say it's worth the price tag. Pulled the old axle and leaf spring off a 60's era Bantam and swapped out for this with a support bar in between. Bumped up tires to 315/75r16 BFG TA/KO's to match my rig and am amazed at how much better this trailer now pulls. Empty it wad bouncing all over the place with the old axle and leaf spring setup. Now I hardly even know it's there. Was very easy to install, took a couple hours but I am happy with how it turned out. A+++ product and customer service! 172019


Comments
HI Matt,WHat size wheel did you use and which hub did you get to match?Appreciate the info
-- comment by: Conrad S - 04/01/2015

10523
Comments
They are GREAT! I put them on a small offroad trailer that has followed me all over some really rough roads in remote Oregon, Washington, and Idaho. They have performed flawlessly, helped the trailer tow extremely well, and were the single best upgrade I did to that trailer. Very much looking forward to another summer of exploring! Massive upgrade to the stock axle leaf spring combo, and I have had the opportunity to show it off to alot of fellow overlanders. I cant speak high enough of them. I also purchased a set of airbags for my vehicle which unfortunately have not held up terribly well. I have had to field repair one once already, and neither holds air terribly well. Truth be told they seem very underdesigned for the job they perform. From my super secret high tech pocket internet window.
Matt N - 02/06/2016

16696

- A20RS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


not happy with one lug nut missing threads!!! but I think they also could supply the wedge plate! the horizontal holes never change and the lower vertical should be slots. for the money I shouldn't have to make a plate. 202996



- A35RS545E
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


It looks like a wonderful, well built system. The shipment was partial, turns out they forgot the rest. Customer service corrected the matter, still took almost 2 additional weeks to get the rest. The packaging for shipping - The suspension pieces should be packed individually not together. The box was torn in half and falling out, scratched up like it had fallen out of the box during shipping when it arrived. There were no installation / alignment shims or mounting hardware in the box, don't know if they were included and missing or they forgot that as well. I found no information on the paperwork for the inventory expected to be in the box. 424016



- A20RS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


These units install easily, are well made, and perform great! The trailer doesn't bounce around like you see a lot of trailers do while traveling down a bumpy road. I traveled some unpaved roads with no issues. I am certainly glad I went axleless. I installed with 15" tires. Problem is I didn't go big enough. I intended to install on an existing trailer that I had. Changed my mind and built a new trailer. The new trailer came in heavier than I had planned. 2k pound capacity is now too small. I have to watch what I load the trailer with so I don't over load the suspension. I intend on buying the 3500 pound units when I have the money. 289894



- A20RS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Only axle I could find to fit my application. Very cool product. Fast delivery. Easy instructions 642073



- A20RS545
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


I wanted to give a lot star, but I spent three months because you missed parts of me a few times. Anyway it is very good for the product. 563720



- ASR35HDS02
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


Massively overbuilt and highest quality !! Note that these are HD versions which have 6000lb spindles and use 6000lb bearings, seals and brakes. 602003



- ASR2KHDS04
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


I think their axle-less design is very clever. The build quality of the suspension part looks good. I have heartburn over the spindle build quality. The spindle is mounted to the suspension and then the trailer wheel mounts on the spindle. The spindles I received are warped from welding. The plate that bolts onto the suspension does not mount flat due to this warping. I called Timbren. The gentleman that helped me was very pleasant. I described the problems and he said he would check his inventory and call me back. He did call me back and said they are all like that. He said get out the grinder and fix what you can and just tighten the bolts super tight, maybe the gap will go away. Really? Wow. The other problems are a LOT of weld spatter where the bolts are supposed to fit and they made a bend in the plate too close to the bolt holes so two bolt heads hit the bend and dont fit flat against the part they are supposed to hold together. Yikes! I am taking the spindles to a machine shop to fix them but I would not have ordered this Timbren stuff had I been warned before hand. So, fair warning. 100490


Comments
Your comments regarding the Axle-Less Suspension are greatly appreciated. To address the issues you have pointed out, we have carefully reviewed our assembly. While we did not come across any major issues, we did however discover a few areas where the quality could be improved, specifically in the areas you brought to our attention. The following improvements have been made to improve the manufacturing process: - Robotic welder gun re-programmed so that it stops from getting too close to the areas adjacent to the mounting holes of the outboard arm and control arm. This will minimize weld spatter. - The distortion of the flat plates is due to the high degree of heat generated during welding. We conducted experiments, changing the sequence of welding operations until we were successful in minimizing the distortion. We apologize if our customer service in addressing your concerns was insufficient at the time of your phone call. Timbren is an ISO 9001:2008 company with an excellent reputation for providing customers with quality products that are well-performing and easy to install.
-- comment by: Quality A - 09/26/2013

2108

- ASR35HDS02
by:

Review from a similar Axle-Less in Trailer Leaf Spring Suspension


I live in California and I'm building a custom off-road camping trailer for overlanding/camping, mainly for the Sierra Nevada backroads, but possibly for longer trips in a variety of terrain. I had read about the axle-less suspension from Timbren and found that it's a popular choice for these types of trailers. In my searches, etrailer.com came up frequently. So I posted a few questions on their web site, and got a prompt response with tons of great information and a complete parts list for what I needed. Much appreciated! The order handling and shipping was very prompt, and all my parts were shipped in one shipment which I definitely appreciate since I don't get packages delivered to my door. I received all the packages today. Great customer support, prompt handling, and quality products. I gave 4/5 stars because the packaging could have been a little better. One of the boxes was a little banged up in the corners, but the content was unharmed as far as I can tell. I've also received follow-up emails to ensure that I received everything and that it was in good shape. Overall, I'd highly recommend the company, and I won't hesitate to buy from etrailer again! My trailer build will probably take a few months to complete with all the bells and whistles, but I'll be sure to post pictures from the process. 546087


35
194
Show More Reviews

Ask the Experts about this Timbren Trailer Leaf Spring Suspension

  • Switching to Timbren Axle-Less Suspension for 2012 Coachmen Clipper
    I have a solution for you, but the Timbren Axle-Less Trailer suspension # TASR5200S05 is not the best option because of the stiffness of the springs that this system uses. The 5200-lb Axle-less system springs are meant to carry a much heavier load than the approximately 2500-lb Coachmen Clipper, and when you use an overrated suspension system you're potentially causing way more jostling, bouncing and in turn, wear and tear on your camper. The Timbren Heavy-Duty Axle-Less Trailer Suspension...
    view full answer...
  • Info Needed to Pick Out Triple Axle Setup for Trailer that Weighs 9,000 lbs
    Since your trailer is going to be a triple axle setup you'll have to go with a traditional style of axle like the # 7359765 and not a Timbren like you mentioned. Reason being that the Timbrens don't have equalizers so when going over uneven terrain more weight gets put on a single axle at a time than a traditional axle that uses equalizers. Equalizers (like the name implies) allow all three of the axles to carry the weight of the trailer even on bumps or uneven terrain. To pick out...
    view full answer...
  • Will Timbren Axle Less Kit Installed on 1/8 inch Thick Frame Rail Require Additional Bracing
    Sounds like your frame dimensions would be thick enough to handle the install of the # TASR5200S05 since it's 1/8 inch thick steel channel. It is harder to say though without seeing the frame and it's design aside from thickness. You might check with a local fabricator to see if they agree, which I think they will, if you wanted to err on the side of caution.
    view full answer...
  • Recommended Replacement Axles for Old Dexter Axle #11 5,200 lb Torsion Axles
    I reached out to my contact at Dexter Axle who said that based off of the numbers you sent in it sounds like you have a #11 Torsion axle rated for 5,200 lbs that is on a Haulmark Trailer manufactured back in 2001 (at least the axle was). Your axle should use 6 lug hubs with EZ-Lube spindles and that it has a 95" hub-face measurement with a 75-3/4" outside bracket measurement (which would be equivalent to spring-center). The closest thing that we have to this is the Dexter Trailer Axle...
    view full answer...
  • 5,200 Lb Timbren Axle-Less System With Compatible Hub, Drum and Electric Brakes
    The Warner-style brake assemblies are no longer made and replacement parts are essentially non-existent at this point, so really your best option is going to be replacing your hub and drum as well as brake assemblies. You may also need to weld on a new brake mounting flange, which will be determined by the diameter of your axle. In order to find the correct replacement hubs for your trailer you need to know the weight rating of your axle, and also what bearings your current hub has....
    view full answer...
  • Hub and Drum Compatibility For Timbren Axle-less Suspension 5200-lbs
    If you're going to use the Timbren Axle-less Suspension System 5200-lbs with brake flanges installed, like the 2" lift model # TASR5200S05 or 4" lift # TASR5200S03 , those are compatible with the Trailer Hub and Drum Assembly - 5.2K and 6K E-Z Lube Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K since they have compatible inner/outer bearings, races and grease seals. However, the # AKHD-655-6-EZ-K are not compatible with the Timbren Axle-less Suspension # ASR5200S01 because the...
    view full answer...
  • Axle-Less Suspension Option for Keystone Cougar 5th Wheel
    We do not have any way to know axle measurements for trailers like your 2018 Keystone Cougar, but we can offer an option for an improved system with the Timbren Axle-Less Suspension System. The Timbren axle-less suspension systems are simply bolted or welded so you do not have to worry about finding an axle that meets any specific measurements. They also offer you an improved ride compared to a traditional through-axle because the Timbrens work independently so if there is a bump on...
    view full answer...
  • Replacement Brake Assemblies for AL-KO T-44 Axles
    I have a solution for you, but the AL-KO T-44 axle has been discontinued since Dexter bought them out and there are no longer parts available for them, so you would need to completely replace the axles in order to replace the brakes. To choose the correct replacement axle you will need to know the hub face to hub face measurement and spring seat center to spring seat center measurements of your current axle; you'll also want to try to match your existing bolt pattern with the hubs in...
    view full answer...
  • Can Torsion Axle Spindles be Replaced on 2013 Rockwood 8280WS Fifth Wheel
    Spindles can be replaced for torsion axles, though you would have to get them removed and put on by a professional welder. I have added a link to our selection of spindles for you to check out to see if we have one that matches the capacity and measurements you need. Another option worth considering is replacing the axle with the Timbren Axle-Less Suspension System. These are simply bolted or welded so you do not have to worry about finding an axle or spindle that meets any specific...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jameson C
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.