bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Side Frame Mount Jack
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. No Drop Leg
Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel Sidewind, Weld-On - 1,600 lbs

Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel Sidewind, Weld-On - 1,600 lbs

Item # F1413050334
lowest price pledge
Our Price: $210.69
You Save: $166.50
Trailer Jack
This item qualifies for Free Shipping
Shipping Weight: 22 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and wide-track wheels for superior stability. Lowest Prices for the best trailer jack from Fulton. Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel Sidewind, Weld-On - 1,600 lbs part number F1413050334 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (128)
  • Q & A (0)
  • Photos
  • Why etrailer?

Fulton Trailer Jack - F1413050334

  • Side Frame Mount Jack
  • 1001 - 2000 lbs
  • Sidewind Jack
  • No Drop Leg
  • Weld-On
  • Swivel Jack - Pull Pin
  • 10 Inch Lift
  • With Wheel
  • Fulton

Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and wide-track wheels for superior stability.


  • Adjustable mount and swivel system for easy lifting and transport
    • Can be adjusted to any height for mounting
    • Swivels into position simply with the integrated, easy-to-grip pull pin
  • Maintenance-free construction
    • Lubricated, 1-piece gearbox eliminates the need for manual lubrication
    • Ventilation port allows you to add extra grease if desired
  • Wide wheel base allows for increased stability
  • Anodized finish on inner and outer aluminum alloy tubes prevents rust even in the harshest environment
  • Sidewind handle is made of strong plastic for durability and ease of use
  • Optional wheel wedge (sold separately - F500133) eliminates the need for a chock
  • Weld-on installation


  • Application: fits 3" x 5" tongues
  • Lift height: 10"
  • Bracket range of adjustability: 8"
  • Overall height (retracted): 26-1/4"
  • Overall height (extended):
    • With handle down: 36-1/4"
    • With handle up: 41-1/4"
  • Height from bottom of wheel to center of bottom mounting hole:
    • Retracted: 12"
    • Extended: 22"
  • Wheel diameter: 8"
  • Pull pin diameter: 9/16"
  • Mounting bolt pattern: 3-1/2" x 4-1/2" on center
  • Capacity: 1,600 lbs
  • Lifetime limited warranty

Please note: Wheel stop does not come standard.

How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.

Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.

It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.

Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.

1413050334 Fulton F2 Marine and Recreational Jack for 3" x 5" Frames, Sidewind, Wide Track, 1,600 lbs

Installation Details F1413050334 Installation instructions

California residents: click here

Customer Reviews

Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel Sidewind, Weld-On - 1,600 lbs - F1413050334

Average Customer Rating:  4.7 out of 5 stars   (128 Customer Reviews)

Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and wide-track wheels for superior stability.


Product choices were excellent! I picked this one, with weld on plate because after carefull consideration, it was the best choice for me.
Shipping was extremely fast, I expected a week or two, but recieved it in three days without paying for expedited shipping.
Onced recieved, I had mounting plate welded to an existing mounting braket, then I painted the steel mounting plate. I then installed them to my trailer and then monted jack.
The final product and job came out perfect and I can now jack trailer and boat with much greater ease.
I would highly recommend this product to anyone. Buy from e-Trailer, they provide great service!
Notice the obvious replaced jack.


Heavy duty and easy to install!


absolutely the very best,this is my second one I have owned,the last one is still on my trailer,and have been on different boat trailers,got new trailers but would not give up my jack,everyone that sees it ,love it,I will be replacing it today,and giving it away,then install my new sweetie,my last one lasted me 11 years and still very good shape. I could not be more pleased with any product as I am with this one,I promise you that it will be the last one you will ever buy,plus it you were to have a problemn they sell replacement parts and rebuild kits.I am 68 years old,and I am just replacing it now,because years from now I wont be able the first to share my experience.

absolutely wonderful
stephen m - 09/03/2018


Ordered as a replacement for a 2 yr old unit on EzLoader trailer. Original never worked properly. Opted for 3 day delivery. Unit arrived and fit perfectly on original welded plate. New jack works perfectly!

Thanks for the followup, George. So far, the jack is working great.
Guy G - 08/15/2018


This was a replacement for the factory installed same jack. That one was very hard to crank and always stiff. New jack replacement was easy. Got three years out of last one. Hoping for the cost I get more out of this one. Good so far. Much easier to crank. Thanks

Sorry to report that I am already experiencing trouble with this product. The crank handle won’t stay in stowed position and is very hard to turn when deployed and raising boat
Ken - 05/15/2019


This jack was exactly what I was looking for. Works great on my bass boat trailer.


This trailer jack is amazing. The only down side is that while it is a "Weld-On" the mounting plate is steel unlike the rest of the unit which is aluminum. This requires an aluminum plate to be fabricated when welding to an aluminum tongue.


I purchased this as a replacement for the trailer jack on my boat trailer. I was impressed with service provided by the etrailer customer service representative (George), who contacted when the product was shipped. The trailer jack is and excellent product and I would purchase from etrailer again.


Called to place an order after memorial day weekend I was able to receive my product in two days. I have had this jack before on my last boat and wanted it again for my new boat even though my current jack was in good shape. It just works that much better. High-quality and performs almost effortlessly. Excellent service on the phone when I placed the order.


I have owned the Fulton jack before. It worked very well.....and I bought another trailer, so I wanted the same quality product. Also, service was excellent. I received immediate notification that my order was accepted and the product arrived in just a few short days. Completely satisfied and would use etrailer again.


Very happy with the service from Items arrived quickly and undamaged. I really like this Fulton jack and matching winch. They really freshened up my trailer.

They are working just fine. Thanks for following up.
Dave S - 12/09/2017


Well built trailer jack. Using it on a Malibu 23' boat trailer and it works perfect


Best nose wheel made rugged easy to move trailer by hand


The first order was damaged when received but etrailer replaced both jacks very quickly.
The new jacks received jacks are well built/solid and work great.


Great product.Fast delivery. E-trailer great company.Small broken part but E-trailer took care of problem right know.


Great jack. Works well. Smooth action. I would recommend it to anyone needing a strong, smooth acting jack.

Its a good jack it works well. I have it on the tongue of a Nitro Z9 bass boat that has a total weight of about 5000lbs loaded. I have the maneuver the boat to get it partially sideways to fit inside the garage. My only complaint is that it is hard to get the wheel to change directions when I need to the boat to roll other than straight forward or backwards. If the trailer was still attached to the trailer hitch, then it would be no problem, but I have to unhook it and maneuver it by hand. Great jack though. I think it does everything its supposed to do.
Michael B - 04/06/2015


these guys got it right


Jack is perfect !


Good upgrade to any trailer, especially if you have to push the trailer around by hand.


Very dependable jack. Easy to install and operate


These folks are excellent to deal with. Great products, low prices and WOW fast shipping.
I will be back. Thanks again. RR


Perfect match to replace broken jack!


excellent product and looks great installed on the trailer


Great product heavy duty jack thanks


Fast shipping excellent service

Show More Reviews

Ask the Experts about this Fulton Trailer Jack

  • Will Fulton F2 Swing-Up Trailer Jack # F1413050334 Fit 4 Inch Channel
    The Fulton F2 Swing-Up Trailer Jack # F1413050334 that you referenced will work well on your Ranger trailer's 4 inch tall channel. I have attached an image a customer sent in of this jack mounted to a channel frame similar to what you described that you can take a look at. The weld-on bracket is included. This jack was designed so that the bracket is welded to the trailer frame and the jack mounts to the bracket. I can't say for certain that mounting the bracket like what you described...
    view full answer...
    Image 1 for
  • Does Weld On Mount for Fulton Jack F2 Jack Come with It
    The weld on bracket for the Fulton F2 Swing-Up Jack part # F1413050334 does come with it. I attached a picture that shows the jack welded to a trailer frame for you to check out as well.
    view full answer...
    Image 1 for
  • What Material is the Weld-On Bracket for the Fulton Jack F1413050334
    The weld-on mounting bracket of the # F1413050334 is steel and not aluminum. This requires an aluminum plate to be fabricated when welding to an aluminum tongue. The rest of the jack is aluminum.
    view full answer...
  • Replacement Jack Solution for 1992 Four Winns Horizon 190 Solution
    Since we don't have a jack that is designed to attach to mounting holes that are 4 inches by 2-3/4 inch your best option will be to weld the mounting plate of the Fulton F2 part # F1413050334 to your trailer frame so that you can then bolt this jack in place.
    view full answer...
  • Bolt Spacing Pattern and Dimensions of Fulton F2 jack # F1413050334
    I attached a picture that has all of the dimensions of the mounting bracket of the Fulton F2 jack # F1413050334 that you referenced.
    view full answer...
    Image 1 for
  • Will the Fulton F2 Swing-Up Trailer Jack Work for my 18 Ft Lund Boat Trailer
    Yes, the Fulton F2 Swing-Up Trailer Jack, # F1413050334, will work for you. I spoke with my contact at Fulton and this jack mounts to your boat trailer with a welding plate that measures approximately 3 inches by 5 inches. Since the plate will be welded on, your trailer frame does not have to have these exact dimensions. As shown in the instructions, this plate can be welded on vertically or horizontally. Fulton does state that welding should be done by a certified welder. Once the plate...
    view full answer...
  • Will Fulton F2 Trailer Jack # F1413040134 Fit a 3 x 2 Inch Trailer Frame
    The Fulton F2 trailer jack # F1413040134 will only fit 3 x 3 inch and 3 x 4 inch trailer frames. What you will need is a weld-on model, # F1413050334. It will fit a trailer frame that is 3 inches tall or more. The plate will need to be welded to the trailer by a qualified professional. The jack then mounts to the plate.
    view full answer...
  • Replacement Washer for Fulton F2 Swing-Up Trailer Jack
    For the Fulton F2 Swing-Up Trailer Jack we do have the Replacement Bearing Kit # F500137, which includes the washer labeled #22 on the diagram that you referenced. The gearbox housing (#9 on the diagram) is unfortunately not available as a replacement part from Fulton. If you need to replace the jack the Fulton F2 Swing-Up # F1413050334 with a 1,600 pound weight capacity will work perfectly.
    view full answer...
    Image 1 for
  • Is There a Replacement Wheel Bracket for the Fulton F2 Swing-Up Trailer Jack
    The wheel housing is not replaceable on the Fulton F2 Swing-Up Trailer Jack so your only option is a new jack, the Fulton F2 Swing-Up Trailer Jack part # F1413050334 which has a 1,600 lb weight capacity.
    view full answer...
    Image 1 for
  • Recommended Trailer Jack for 3 x 2 Trailer Tongue
    I'm not 100 percent sure what you are referring to in terms of center pull tow bar; I assume just the trailer tongue but want to make absolutely sure. Would it be possible to send a photo?
    view full answer...
  • Fulton F2 Swing-Up Trailer Jack for 2 x 5-Inch Trailer Frame Member
    For a Fulton F2 trailer jack rated for 1600-lbs that you can bolt on to your 2 x 5-inch trailer frame you can use the Fulton F2 model # F1413140334. This comes with u-bolts that will work on a 5-inch-tall frame member. I confirmed with my contact at Fulton that this jack will work well on your trailer frame.
    view full answer...
  • Can Foot Plate of Fulton F1413200334 F2 Trailer Jack Be Replaced with Caster Wheel
    The foot plate of the Fulton # F1413200334 F2 Trailer Jack isn't removable. For a similar jack with a caster wheel, you'd want to go with # F1413050334. Because the caster wheel limits the weight capacity, the # F1413050334 jack has a 1600 lb capacity, versus the 2000 lb capacity of the # F1413200334 jack you'd looked at. I've linked you to a product description video for the # F1413050334 jack with the caster wheel.
    view full answer...
  • Can I use a Fulton F2 Trailer Jack with a Tongue Height of 24 Inches
    The Fulton F2 # F1413050334 would work great for your needs! I have also linked a video for you to view. I measured the jack from the ground up to its maximum extension of the center of the bracket which is 28.5 inches. Also, I would consult with a professional welder prior to welding the Fulton F2 # F1413050334 to aluminum.
    view full answer...
  • Swing Up Trailer Jack Recommendation for Mastercraft Boat Trailer
    I'd recommend the weld-on Fulton F2 Swing Up Jack part # F1413050334 for your Mastercraft trailer. This will give you an easy to use and high quality trailer jack that will last you a long time!
    view full answer...
  • Availability of Fulton F2 Swing-Up Trailer Jack with 3-1/2- x 5-1/2-Inch Mounting Bolt Pattern
    The Fulton F2 Jack # F1413050334 is a weld-on product that comes with a mounting plate to which the jack itself will bolt with included hardware once the plate is welded into place. The bolt hole on-center measurements are 3-1/2- x 4-1/2-inches. Fulton does not offer a bolt-on jack with your required 3-1/2 x 5-1/2-inch bolt centers. However, there's another option for you, Fulton F2 Swing-Up Jack # F1413040134. This has the same weight and lift capacities as the other but uses a bolt-on...
    view full answer...
  • Replacement for Broken Fulton F2 Trailer Jack
    I checked with Fulton, and the part of the jack you are referring to is not a replaceable part for the Fulton F2 trailer jack. So while I know it isn't the news you wanted to hear, because your jack is not particularly usable as it is, the best option really is going to be a replacement F2 jack. - Bolt-On: Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel # F1413040134 - Weld-On: Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel # F1413050334 I have added links...
    view full answer...
  • Recommendation for a Trailer Jack with Easy to Maneuver Caster Wheel
    To recommend a replacement replacement caster for your jack I would need the jack model number. If you would like to replace the jack on your trailer the easiest to maneuver style of jack is one with an independent caster wheel like the Weld on Fulton Trailer Jack, item # F1413050334 or the bolt on model Fulton Trailer Jack, item # F1413040134. These jacks utilize the same style of non-stick washer for the swivel action of the wheel. In my experience any jack caster that is weighted down...
    view full answer...
  • Recommended Swing-Up Trailer Jack For Pontoon Boat Trailer
    It sounds like your trailer jack was a custom installation. We do not offer a jack that is designed to be mounted like you described. The jacks we have are either a bolt-on or they have a plate that can be welded to the trailer frame. The fold-up tongue jacks we offer for trailers are designed to fit trailer frames or tongues of different sizes like part # F1413140334 which will fit trailers with a 4 to 5 inch frame. This jack has a capacity of 1,600 lbs and is a bolt-on application....
    view full answer...
  • What Is the Difference Between Bolt Patterns on Fulton F2 F1413100334 and F1413050334
    Yes. The bolt patterns that were referred to in the videos are actually the same and in reality the .06" is a negligible difference that falls within a reasonable margin of error; I believe that on the # F1413050334 measurements were performed with a calipers where the measurement on the # F1413100334 were performed with a tape measure/ruler. These two jacks are extremely similar but the # F1413050334 has a locking mechanism on the handle to eliminate the handle free-swinging when you...
    view full answer...
  • Parts Needed for Fulton Swing-Up Trailer Jack
    If you are wanting to use the Weld-On Mounting Bracket and Hardware for Fulton Swing-Up Trailer Jacks with 3" x 4" Mount Item # F500277 on your trailer you will need: Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel Sidewind, Weld-On - 1,600 lbs Item # F1413050334 OR Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind, Weld-On - 1,600 lbs Item # F1413060334 Both are great options for your trailer, but my pick of the two would be the "Dual 7" Wheel" Swing up trailer jack....
    view full answer...
  • Trailer Jack Recommendation for a 2 x 3 Snowmobile Trailer Frame
    What you will need is a weld-on model, # F1413050334. It will fit a trailer frame that is 3 inches tall or more. The plate will need to be welded to the trailer by a qualified professional. The jack then mounts to the plate. This jack has a 8 inch diameter wheel as well.
    view full answer...
  • Recommended Marine Jack to Fit 3-1/2 Inch x 5-1/2 Inch Mounting Plate
    For a marine jack with the mounting dimensions you need, I recommend the Fulton Blot-Thru Swivel Marine Jack with Caster # FXP10. This jack has the 3-1/2 inch x 5-1/2 inch mounting bolt pattern to fit to the existing mounting plate on your trailer. I have attached a photo showing these dimensions for you. This jack was designed to bolt around the trailer frame. However, you can certainly use different hardware to bolt to jack to your existing mounting plate.
    view full answer...
    Image 1 for
  • Recommended Weld-On Swivel Jack with 5-7K Lift Capacity
    We do have a few pull pin swivel jacks available with an aluminum construction such as the Fulton F2 Swing-Up # F1413050334, however they all have lower weight capacities than what you are looking for. This particular jack has a weight capacity of 1,600 pounds. For a swivel jack with your required capacity, I recommend looking at the Bulldog Round, Pipe-Mount Swivel Jack # BD198250. This weld-on sidewind jack has a lift capacity of 5,000 pounds and a total lift of 15 inches. While this...
    view full answer...
  • Replacement Trailer Jack for Heritage Boat Trailer That Uses Welded-On Jack Mount
    It sounds like your jack may use a weld-on mounting plate like # F500277 but I pulled one from the warehouse to measure its hole spacing and found those dimensions to differ from what you mentioned. The mounting hole spacing is 3-7/8-inches x 4-1/2-inches measured on hole centers as shown in the linked photo I prepared for you. I checked the Heritage Trailer website and found that many of their boat trailers use the excellent Fulton F2 jack # F1413050334 that uses the above mounting plate. We...
    view full answer...
    Image 1 for

< Previous

Do you have a question about this Trailer Jack?

  • Why

    At we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Shelly K
Updated by:
Shelly K
Employee Alexander C
Updated by:
Alexander C
Employee Jenny M
Updated by:
Jenny M
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Dustin K
Video Edited:
Dustin K

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.