Recommended Swivel Marine Trailer Jack W/ Wheel That Mounts To 2.49" Male Tube Via Snap Ring

Updated 06/16/2021 | Published 06/15/2021

Products Featured in This Question

Fulton F2 Trailer Jack w/ Wide-Track Wheel - Sidewind - Swivel - 10" Lift - Aluminum - 1.6K

(42)

$296.66

Replacement Weld-On L-Bend Bracket for Bulldog and Fulton Snap-Ring Swivel Jacks

(8)

$22.58

Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K

(1737)

$116.01

Question:

I have a 22foot boat and I need a swing away trailer jack with a wheel. The problem is mounting it to the trailer currently the trailer has a steel plate with a male tube that is 2.486inch OD and there is a clip holding the swing away jack. I cant find a jack like this on your website, can you please help?

asked by: Paul B

Expert Reply:

Based on the description you provided of your current trailer jacks mounting bracket it sounds like you have a jack similar to the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301.

This jack is attached to the trailer via a L-bend bracket # F500242 which has an outside diameter of 2-1/2" and uses a snap ring to secure the jack.

If your trailer has a mounting bracket that looks like the # F500242 then you can use the # FTJ120W0301 as an exact replacement.

The # FTJ120W0301 is a swivel marine jack with a wheel like you are wanting, and has a 1200lb weight capacity. From the center of the hole on the mounting bracket with the jack retracted measures 13", and with the jack extended measures 23".

If your mounting bracket is not the same as the # F500242 then just send me a picture and I would be happy to see what options we have that use that mount.

I included a video of the # FTJ120W0301 for you to take a look at.